• 제목/요약/키워드: pre-extraction

검색결과 510건 처리시간 0.031초

비감독 학습 기법에 의한 한국어의 키워드 추출 (Keyword Extraction in Korean Using Unsupervised Learning Method)

  • 신성윤;이양원
    • 한국정보통신학회논문지
    • /
    • 제14권6호
    • /
    • pp.1403-1408
    • /
    • 2010
  • 한국어 정보검색에서는 문서를 대표하는 색인어 또는 키워드로서 명사를 사용하는데, 이러한 명사 및 키워드 추출이란 문서 내에 존재하는 모든 명사를 찾아내는 작업이다. 본 논문에서는 기 구축된 사전을 이용하여 키워드를 추출하는 방법을 제시한다. 이 방법은 불필요한 연산을 줄여서 수행 시간을 단축시켰다. 그리고 대용량의 문서에서도 정확도에 크게 영향을 미치지 않으면서 명사를 추출할 수 있다. 본 논문에서는 명사의 출현 특성을 이용한 명사추출 방법 및 비감독 학습 기법에 의한 키워드 추출 방법을 제시한다.

흡착제를 이용한 수중의 미량 이취물질 분석법 개발에 관한 연구 (A Study on the Development of Analytical Method for Micro-Odorous Compounds in Water)

  • 김은호;성낙창;최용락
    • 생명과학회지
    • /
    • 제9권5호
    • /
    • pp.575-580
    • /
    • 1999
  • Even if odorous compounds remained very low concentration in water, it caused strong odor. Because Geosmin and most of odorous compound had very vaporization, those were difficult to analyze with GC/MSD and Purge & Trap. So, we needed pre-treatment method for decreasing amounts of extracting solvents, improving recovery efficiencies and increasing analytical efficiencies. This study developed efficient technology for analyzing odorous compounds, using various adsorbents and extracting solvents. The optimum adsorbent was XAD resins. Especially, XAD-2, XAD-7 and XAD-2010 were superior, but XAD-2 of these and MTBE was the optimum extraction solvent. Other extraction solvent's efficiency was in order of MTBE>Dichloromethane>n-Hexane>Diethylether. The optimum NaCl dosage for increasing efficiency was 5g in liquid-liquid extraction method. The shaking time(0∼24hr) had no concern with adsorption efficiency. The optimum adsorbent was XAD-2 resin and extraction solvent was MTBE. Dosing NaCl, adsorption efficiency was increased in liquid-liquid extraction method, but NaCl has no effect on liquid-solid extraction method. In this experimental results, this method will apply to not only Geosmin but other well-known odorous compounds (2-MIB, IBMP, IPMP, TCA) and algae toxins (Mycrocystin, Anatoxin etc)

  • PDF

식물세포배양으로부터 Paclitaxel 분리를 위한 액-액 추출 조건의 최적화 (Optimization of liquid-liquid extraction conditions for paclitaxel separation from plant cell cultures)

  • 김진현
    • KSBB Journal
    • /
    • 제24권2호
    • /
    • pp.212-215
    • /
    • 2009
  • 본 연구에서는 식물세포배양으로부터 항암물질 paclitaxel을 고 순도, 고 수율로 분리 가능한 액-액 추출 공정에서의 주요 공정 변수들을 최적화 하였다. 액-액 추출을 위한 최적의 유기용매 (methylene chloride) 첨가량, 추출횟수, 혼합시간, 정체시간은 각각 0.28 (v/v), 3 (times), 30 min, and 40 min 임을 알 수 있었다. 액-액 추출 공정은 특히 메탄올을 이용한 biomass 추출물에 포함되어 있는 다량의 극성불순물을 제거하는데 매우 효과적이었다. 또한 액-액 추출 후 농축조건으로는 후속공정에서의 높은 순도의 paclitaxel 뿐만 아니라 작업의 용이성 측면에서 액-액 추출액을 rotary evaporator로 완전히 농축하는 것이 가장 바람직함을 알 수 있었다.

비감독 학습 기법에 의한 키워드 추출 (Keyword Extraction Using Unsupervised Learning Method)

  • 신성윤;백정욱;이양원
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 춘계학술대회
    • /
    • pp.165-166
    • /
    • 2010
  • 명사 추출이란 문서 내에 존재하는 모든 명사를 찾아내는 작업으로서, 한국어 정보검색에서는 문서를 대표하는 색인어 또는 키워드로서 명사를 사용한다. 본 논문에서는 기 구축된 사전을 이용하여 키워드를 추출하는 방법을 제시한다. 이 방법은 불필요한 연산을 줄여서 수행 시간을 단축시켰다. 그리고 대용량의 문서에서도 정확도에 크게 영향을 미치지 않으면서 명사를 추출할 수 있다. 본 논문에서는 명사의 출현 특성을 이용한 명사 추출 방법 및 비감독 학습 기법에 의한 키워드 추출 방법을 제시한다.

  • PDF

마이크로파 추출법을 이용한 방사선 조사 대두의 Hydrocarbons 분석 전처리조건 최적화 (Optimization of Pre-Treatment Conditions for Hydrocarbons Detection from Irradiated Soybean Using Microwave-Assiated Extraction)

  • 이정은;권중호
    • 한국응용과학기술학회지
    • /
    • 제30권4호
    • /
    • pp.612-621
    • /
    • 2013
  • 지질 함량이 많은 식품에 방사선 조사여부 판별방법으로 적용가능한 hydrocarbons법의 전처리 추출공정을 개선하고자, 추출시간을 효율화 하고 추출용매의 사용을 줄일 수 있는 마이크로웨이브 추출법을 적용하였다. 국제 교역량이 가장 높은 농산물중 대두를 대상으로 방사선 조사(4 kGy)를 하여 hydrocarbons 분석에 대한 전처리 조건을 최적화하고자 하였다. 예측된 대두의 최적 추출범위는 extraction time 1.3-3.2분, microwave power 61-133 W로 나타났고, 예측된 범위에서 임의점을 설정하여 회귀식에 대입하여 최적값을 예측하였을 때 값은 microwave power와 extraction time이 각각 97 W과 2.2 분으로 확인되었다. 방사선조사 허가식품에 대해서 검지법의 분석결과의 정확성과 더불어 신속성이 요구되는 상황에서 hydrocarbons검지법 적용이 가능한 대두를 대상으로 MAE (micarowave-assisted extraction) 추출법을 적용한다면, 식품공전상의 현행 추출전처리(12-24시간)에 따른 분석시간을 줄이고 추출공정 개선이 가능할 것으로 본다.

교정치료후의 변화에 관한 상악치열궁의 모형분석에 의한 연구 (MODEL ANALYSIS IN ORTHODONTIC TREATMENT CHANCES OF THE MAXILLARY DENTAL ARCH)

  • 이원철
    • 대한치과교정학회지
    • /
    • 제4권1호
    • /
    • pp.41-48
    • /
    • 1974
  • The author has selected 70 non-extraction and extraction cases. The linear measurements were made in the maxillary dental cast at pre-and post-treatment. The purpose of this study was to detect out the changes occured during orthodontic treatment. On the basis of findings of this study, the following results are made: 1. In extraction cases: 1) The maxillary intercanine width increased. 2) The maxillary dental arch width decreased. 3) The maxillary inter first molar width decreased. 4) The maxillary dental arch length decreased. 5) The maxillary dental arch length (I-3) increased. 2. In non-extraction cases, the maxillary intercanine width decreased in Angle's class III.

  • PDF

Consideration of root position in virtual tooth setup for extraction treatment: A comparative study of simulated and actual treatment results

  • Mirinae Park;Veerasathpurush Allareddy;Phimon Atsawasuwan;Min Kyeong Lee;Kyungmin Clara Lee
    • 대한치과교정학회지
    • /
    • 제53권1호
    • /
    • pp.26-34
    • /
    • 2023
  • Objective: The purpose of the present study was to compare the root positions in virtual tooth setups using only crowns in a simulated treatment with those achieved in the actual treatment. Methods: Pre- and post-treatment intraoral and corresponding cone beam computed tomography (CBCT) scans were obtained from 15 patients who underwent orthodontic treatment with premolar extraction. A conventional virtual tooth setup was used for the treatment simulation. Pre- and post-treatment three-dimensional digital tooth models were fabricated by integrating the patients' intraoral and CBCT scans. The simulated root positions in the virtual setup were obtained by merging the crown in the virtual setup and root in the pre-treatment tooth model. The root positions of the simulated and actual post-treatment tooth models were compared. Results: Differences in root positions between the simulated and actual models were > 1 mm in all teeth, and statistically significant differences were observed (p < 0.05), except for the maxillary lateral incisors. The differences in the inter-root angulation were > 1° in all teeth, and statistically significant differences were observed in the maxillary and mandibular canines. Conclusions: The virtual tooth setup using only crown data showed errors over the clinical limits. The clinical application of a virtual setup using crowns and roots is necessary for accurate and precise treatment simulation, particularly in extraction treatment.

The effect of bisphosphonate discontinuation on the incidence of postoperative medication-related osteonecrosis of the jaw after tooth extraction

  • Kang, Sang-Hoon;Park, Se-Jin;Kim, Moon-Key
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제46권1호
    • /
    • pp.78-83
    • /
    • 2020
  • Objectives: The discontinuation of bisphosphonate (BP) treatment before tooth extraction may induce medication-related osteonecrosis of the jaw (MRONJ). Whether the long-term discontinuation of BP treatment before tooth extraction affects the risk of developing MRONJ after tooth extraction or whether extended drug holidays induce systemic side effects remains unclear. The present study assessed the incidence of MRONJ among patients who underwent tooth extraction and did not discontinue BP therapy prior to the procedure. Materials and Methods: Patients were classified according to whether or not they discontinued BP therapy before tooth extraction. Differences in the incidence of MRONJ after tooth extraction were compared between the two groups using the chi-squared test. Results: The BP-continuation (BPC) and BP-discontinuation (BPDC) groups included 179 and 286 patients, respectively. One patient in the BPC group and no patients in the BPDC group developed MRONJ (P=0.385). The patients in the BPDC group stopped receiving BP therapy at a mean of 39.0±35.5 months prior to tooth extraction. Conclusion: The possibility of pre-existing MRONJ in the extraction area must be considered during the extraction procedure. Routine discontinuation of BP medications for several months before the extraction procedure should be carefully considered, as evidence of its efficacy in reducing the development of post-extraction MRONJ is limited.

전위차법을 이용한 경화 콘크리트 및 콘크리트재료의 염화물 측정기술 개발 (Study for the Determination of chloride ion in hardened concrete using Potentiometic Methods)

  • 이경문;윤인준;서인호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.578-581
    • /
    • 2006
  • This study was performed to develop acid-soluble extraction solution and water-soluble extraction solution for hardened concrete. By use of this potentiometric method one can determinate chloride ion concentration in hardened concrete without pre-treatment and it can be used on-site.

  • PDF

염료 추출조건에 따른 소목의 색소성분 분리 거동 (Separation of Chromophoric Substance from Sappanwood under Different Extraction Conditions)

  • 안춘순
    • 한국의류학회지
    • /
    • 제31권12호
    • /
    • pp.1653-1661
    • /
    • 2007
  • 본 연구는 출토직물의 염료 성분 판정을 위한 장기적인 프로젝트의 일환으로서 천연염료 식물 중 우리나라는 물론 동서양 각지에서 과거에 염색식물로 널리 사용되었던 소목에 대하여 주 색소성분인 브라질린을 가스크로마토그라피 질량분석법(GC-MS)으로 검출할 수 있는 최적의 염료 추출 및 분석 조건을 확립하는데 그 목적을 두었다. 소목추출액에 대한 GC-MS 분석 결과 증류수보다는 메탄올이, 메탄올보다는 아세톤 추출이 브라질린 추출효과가 높았다. 추출기기 간에는 $30^{\circ}C$로 진행된 waterbath shaker보다 상온에서 진행된 shaking plate가 브라질린 추출이 높았으며 두 기계 모두 1시간보다는 12시간 추출이 월등히 높은 추출량을 보였다. 증류수를 사용해 pH $3{\sim}9$로 조절하여 브라질린의 추출효과를 조사한 결과 pH 5 조건에서 브라질린 검출량이 가장 많았다. GC-MS 분석 조건은 컬럼내 온도를 초기온도 $50^{\circ}C로 하고 온도 증가율을 $23^{\circ}C/min$로 하여 $210^{\circ}C$까지 끌어올리고 다시 온도증가율을 $30^{\circ}C/min$로 하여 최종적으로 $305^{\circ}C로 가열한 후 14분 동안 holding하여 전체 분리시간을 24.12분으로 한 방법이 가장 효과적이었으며 MSD 스캔범위는 $75{\sim}400m/z$이 적합하였다.