• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1103-1109
• /
• 2014

The motion recognition system has been broadly studied in digital image and video processing fields. Recently, method using th depth image is used very useful. However, recognition accuracy of depth image based method will be loss caused by size and shape of object distorted for angle of the depth sensor. Therefore, distortion correction of depth sensor is positively necessary for distinguished performance of the recognition system. In this paper, we propose a pre-processing algorithm to improve the motion recognition system. Depth data from depth sensor converted to real world, performed the corrected angle, and then inverse converted to projective world. The proposed system make progress using the OpenCV and the window program, and we test a system using the Kinect in real time. In addition, designed using Verilog-HDL and verified through the Zynq-7000 FPGA Board of Xilinx.

• Food Science of Animal Resources
• /
• v.37 no.1
• /
• pp.105-113
• /
• 2017

The effect of fermented spinach extracts on color development in cured meats was investigated in this study. The pH values of raw cured meats without addition of fermented spinach extract or nitrite (negative control) were higher (p<0.05) than those added with fermented spinach extract. The pH values of raw and cooked cured meats in treatment groups were decreased with increasing addition levels of fermented spinach extract. The lightness and yellowness values of raw cured meats formulated with fermented spinach extract were higher (p<0.05) than those of the control groups (both positive and negative controls). The redness values of cooked cured meats were increased with increasing fermented spinach extract levels, whereas the yellowness values of cooked cured meats were decreased with increasing levels of fermented spinach extract. The lowest volatile basic nitrogen (VBN) and thiobarbituric acid reactive substances (TBARS) values were observed in the positive control group with addition of nitrite. TBARS values of cured meats added with fermented spinach extract were decreased with increasing levels of fermented spinach extract and VBN values of curing meat with 30% fermented spinach extract was lower than the other treatments. Total viable bacterial counts in cured meats added with fermented spinach extract ranged from 0.34-1.01 Log CFU/g. E. coli and coliform bacteria were not observed in any of the cured meats treated with fermented spinach extracts or nitrite. Residual nitrite contents in treatment groups were increased with increasing levels of fermented spinach extract added. These results demonstrated that fermented spinach could be added to meat products to improve own curing characteristics.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.156-162
• /
• 2002

In this study, we attempted in preparing high precision EEG measuring equipment. To measure EEG in high efficiency, pre-amplifier should get high performance common mode rejection ratio. Also, separation amplifier is essential to eliminate common line noise. So, our study were pointed at elevating the efficiency of eliminating noise, user safety and low noise characteristics. Prepared high precision pre-amplifier for EEG was A/D converted to automatically classify $\alpha$ wave, $\beta$ wave and $\theta$ wave. And converted data were Fast Fourier Transformed with real time DSP (Digital Signal Processing). Clinical demonstrations were carried out with healthy students, aged between 20 to 26 who has no histories of illness. To recognize the efficiency of the EEG, prepared EEG were used with MS equipment in low stimulated state and high stimulated state. Then, we studied at the effect of sensitivity on brain wave. From this study, it is known that our EEG equipment is efficient in sensitivity evaluation and suitable stimulations for each psychological state are required.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.5
• /
• pp.89-99
• /
• 2019

In this study, we estimated the spatially-distributed soil moisture at the high resolution ($10m{\times}10m$) using the satellite-based Sentinel-1A/B SAR (Synthetic Aperture Radar) sensor images. The Sentinel-1A/B raw data were pre-processed using the SNAP (Sentinel Application Platform) tool provided from ESA (European Space Agency), and then the pre-processed data were converted to the backscatter coefficients. The regression equations were derived based on the relationships between the TDR (Time Domain Reflectometry)-based soil moisture measurements and the converted backscatter coefficients. The TDR measurements from the 51 RDA (Rural Development Administration) monitoring sites were used to derive the regression equations. Then, the soil moisture values were estimated using the derived regression equations with the input data of Sentinel-1A/B based backscatter coefficients. Overall, the soil moisture estimates showed the linear trends compared to the TDR measurements with the high Pearson's correlations (more than 0.7). The Sentinel-1A/B based soil moisture values matched well with the TDR measurements with various land surface conditions (bare soil, crop, forest, and urban), especially for bare soil (R: 0.885~0.910 and RMSE: 3.162~4.609). However, the Mandae-ri (forest) and Taean-eup (urban) sites showed the negative correlations with the TDR measurements. These uncertainties might be due to limitations of soil surface penetration depths of SAR sensors and complicated land surface conditions (artificial constructions near the TDR site) at urban regions. These results may infer that qualities of Sentinel-1A/B based soil moisture products are dependent on land surface conditions. Although uncertainties exist, the Sentinel-1A/B based high-resolution soil moisture products could be useful in various areas (hydrology, agriculture, drought, flood, wild fire, etc.).

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.490-498
• /
• 2019

The intermittent electric power supply of renewable energy can have extremely negative effect on power grid, so long-term and large-scale storage for energy released from renewable energy source is required for ensuring a stable supply of electric power. Power to gas which can convert and store the surplus electric power as hydrogen through water electrolysis is being actively studied in response to increasing supply of renewable energy. In this paper, we proposed the novel concept of hydrogen liquefaction process combined with pre-cooling process using the liquid air. It is that hydrogen converted from surplus electric power of renewable energy was liquefied through the hydrogen liquefaction process and vaporization heat of liquid hydrogen was conversely recovered to liquid air from ambient air. Moreover, Comparisons of specific energy consumption (kWh/kg) saved for using the liquid air pre-cooling was quantitatively conducted through the performance analysis. Consequently, about 12% of specific energy consumption of hydrogen liquefaction process was reduced with introducing liquid air for pre-cooling and optimal design point of helium Brayton cycle was identified by sensitivity analysis on change of compression/expansion ratio.

• Journal of Pharmaceutical Investigation
• /
• v.10 no.1
• /
• pp.4-12
• /
• 1980

The studies of the compounding analgestic antipyretics were examined by the converted Koster's method (mice) and the converted Mac Donald's method (mice) induced on the three assumption crossover test. And the following results were found. 1. The same effect of the writhing inhibition in this compounding antipyretic dosage by it's oral administration is as follows. Aminopyrine 100mg/kg. (standard), aminopyrine 50mg/kg compounding with chlorpheniramine maleate 2mg/kg., compounding with diphenhydramine hydrochloride 8mg/kg., compounding with atropine sulfate 0.2mg/kg., or compounding with scopolamine hydrobromide 0.2mg/kg. And aspirin80mg/kg., Salicylamide 90mg/kg., sulpyrine 60mg/kg., or phenacetin 70mg/kg. compounding with the same dosage of the adjutants above. 2. The elevation-rate of the reaction threshold in this compounding antipyretic dosage by it's oral administration calculate as follows. When the elevation-rate (ER) of aminopyrine (100mg./kg.) is 1.00 (Standard), ER of aminopyrine (50mg./kg.) compounding with chlorpheniramine maleate (2mg./kg.) calculated 1.42, aspirin (80.mg./kg.) compounding with diphenhydramine hydrochloride (80mg./kg.) calculated 1.18, salicylamide (90mg./kg.) compounding with chlorpheniramine maleate (2mg./kg.) calculated 1.15, sulpyrine (60mg./kg.) compounding with chlorpheniramine maleate(2mg./kg.) calculated 1.28, and ER phenacetin (70mg./kg.) compounding with chlorpheniramine maleate (2mg./kg.) calculated 1.19.

• Journal of Oral Medicine and Pain
• /
• v.25 no.1
• /
• pp.41-51
• /
• 2000

This study was performed to investigate the effect of three modalities commonly used for reduction of oral malodor and to review the contributing factors for halitosis. For this study, 45 subjects of good general health in their third decades were selected, and they were divided into three groups by each modality, that is, tongue scraping, $ZnCl_2$ mouth rinse, and periodontal treatment. Subjective sense of halitosis, diets, Oral hygiene index based on tooth brushing and tongue brushing habit, resting salivary flow rate, gingival index, degree of tongue coating were recored in the Halito-Chart designed by the author. Oral malodor converted from volatile sulfur compound was measured by the Halimeter$^{(R)}$(Interscan Co., USA), and the correlation between the oral factors and pre-treatment halimeter score were analysed. Data obtained were analysed by the SPSS windows program and the results of this study were as follows : 1. There were no significant correlation between oral factors such as oral hygiene index, salivary flow rate, gingival index, degree of tongue coating and pre-treatment halimeter score. 2. Difference between pre- and post-treatment halimeter score by the three modalities were significant, but correlation between pre- and post-treatment score within group was most significant in the periodontal treatment group followed by the tongue scraping group and lowest in the $ZnCl_2$ mouth rinse group. 3. Reduction of halimeter score was significant only in subjects with relatively more tongue coating in the tongue scraping group, but in the $ZnCl_2$ mouth rinse group and in the periodontal treatment group, the modality applied to each group had same significant effects without regard to the degree of oral hygiene index or gingival index. 4. Men had more tongue coating than women, and reduction of halimeter score was significant in men, but not in women.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.7
• /
• pp.41-51
• /
• 2024

In this paper, we explore the enhancement of target detection accuracy in the guided weapon using deep learning object detection on infrared (IR) images. Due to the characteristics of IR images being influenced by factors such as time and temperature, it's crucial to ensure a consistent representation of object features in various environments when training the model. A simple way to address this is by emphasizing the features of target objects and reducing noise within the infrared images through appropriate pre-processing techniques. However, in previous studies, there has not been sufficient discussion on pre-processing methods in learning deep learning models based on infrared images. In this paper, we aim to investigate the impact of image pre-processing techniques on infrared image-based training for object detection. To achieve this, we analyze the pre-processing results on infrared images that utilized global or local information from the video and the image. In addition, in order to confirm the impact of images converted by each pre-processing technique on object detector training, we learn the YOLOX target detector for images processed by various pre-processing methods and analyze them. In particular, the results of the experiments using the CLAHE (Contrast Limited Adaptive Histogram Equalization) shows the highest detection accuracy with a mean average precision (mAP) of 81.9%.

• Journal of Digital Contents Society
• /
• v.13 no.1
• /
• pp.111-118
• /
• 2012

The burst is to require abruptly high transmission rate in case of transmitting pre-stored variable bit rate video data, and it causes to be inefficient use of network resource, resource reservation. To avoid these problems, smoothing is transmission plan where variable rate video data is converted to a constant bit rate stream. These smoothing algorithms include CBA, MCBA, MVBA and others. To evaluate amount of burst reduction in the existing CBA, MCBA, MVBA algorithm, this paper compares the burst-related-factors of transmission plan in smoothing algorithms with original video sources which were stored Variable Bit Rate. There are maximum frame bytes, maximum GOP bytes, transmission rate variability per frame, transmission rate variability per GOP in burst-related evaluation factors. Experimental result shows burst-related factors of smoothing algorithms which were used for experiment lower than that of pre-stored video data, except special case.

• Current Photovoltaic Research
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2019

The $Cu(In,Ga)Se_2$ (CIGS) thin film obtained by two-step process (metal deposition and Se annealing) has a rough surface morphology and many voids at the CIGS/Mo interface. To solve the problem a precursor that contains Se was employer by depositing a (In,Se)/(Cu,Ga) stacked layer. We devised a two-step annealing (vacuum pre-annealing and Se annealing) for the precursor because direct annealing of the precursor in Se environment resulted in the small grains with unwanted demarcation between stacked layers. After vacuum pre-annealing up to $500^{\circ}C$ the CIGS film consisted of CIGS phase and secondary phases including $In_4Se_3$, InSe, and $Cu_9(In,Ga)_4$. The secondary phases were completely converted to CIGS phase by a subsequent Se annealing. A void-free CIGS/Mo interface was obtained by the two-step annealing process. Especially, the CIGS film prepared by vacuum annealing $450^{\circ}C$ and subsequent Se annealing $550^{\circ}C$ showed a densely-packed grains with smooth surface, well-aligned bamboo grains on the top of the film, little voids in the film, and also little voids at the CIGS/Mo interface. The smooth surface enhanced the cell performance due to the increase of shunt resistance.