• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.552-557
• /
• 2005

Effect of pre- and post-mild heat treatment on quality of fresh-cut potatoes was investigated with the focus on surface color, firmness, phenolics, vitamin C and sensory characteristics. As the pre-heat treatment before cutting of potatoes, dried hot air (DH) and hot water (WH) treatment were conducted at $45^{\circ}C$ for 60 min, respectively. As a post-heat (CH) treatments, potato cubes were dipped into water of $55^{\circ}C$ for 45 seconds after cutting. The potato cubes were packed in 15 cm x 20 cm LDPE pouches $30^{\mu}m$ thick and then stored at $5{\pm}1^{\circ}C$. The respiration rate of fresh-cut potatoes was decreased by mild heat treatment Especially, the rate of cubes treated with DH was decreased by $20\%$ compared to that of the non-heat treated. L value of cubes treated with DH showed higher value than that of others. Firmness and free phenolics had no significant difference between the treatments. The fresh-cut potatoes prepared with non-heat treatment showed higher vitamin C content than that of the heat treated. In sensory visual color, CH treated cubes marked the best quality. Conclusively, mild heat treatment, especially CH treatment, showed positive effect on browning inhibition and quality enhancement of fresh-cut potatoes.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.2
• /
• pp.491-497
• /
• 2007

Hyeonggaeyeongyo-tang (HYT; Jingjielianqiao-tang), is known to be effective in lowering wind-heat blended as a pathogen of kidney. HYT has been traditionally used for the treatment of a syndrome in kidney meridian, due to invasion of pathogenic wind and heat. Nowadays, this prescription is used to treat diseases marked by excessive wind and heat in the kidney meridian, such as acute otitis media, empyema, hypertrophic rhinitis, nasal bleeding, nasal obstruction, acne and tonsillitis. The present study was conducted to evaluate the effect of HYT on the regulatory mechanism of cytokines and nitric oxide (NO) for the immunological activities in Raw 264.7 cells. After the treatment of HYT water extract, cell viability was measured by MTT assay, NO production was monitored by measuring the nitrite content in culture medium. Cyclooxygenase-2 (COX-2_ and inducible nitric oxide synthase (iNOS) were determined by immunoblot analysis, and levels of cytokine were analyzed by sandwich immunoassays. The production of No was significantly inhibited by pre-treatment (1h) with HYT(0.1-0.3 mg/ml) on LPS-activated Raw264.7 cells. The expression of iNOS and COX-2 protein were up-regulated by LPS, but the increased levels of iNOS and COX-2 were inhibited by pre-treatment of HYT (0.3-1.0 mg/ml), respectively. And the level of interleukin-6 (IL-6), cytokine released from macrophage, was reduced by HYT pre-treatment (0.3-1.0 mg/ml). Thus, the present data suggest that HYT may play an important role in adjunctive therapy in Gram-negative bacterial infections.

• Journal of the Korean Professional Engineers Association
• /
• v.31 no.5
• /
• pp.110-120
• /
• 1998

The effect of heat treatment and the order of antioxidants treatment toward the thermally oxidized palm oil which has been stored at 60 $^{\circ}C$ was studied. The summerized results of this study are as follows; 1. In the accelerated autoxidation condition, tocopherol showed no distinct effect on the changes of peroxide of value between added tocopherol samples pre-and post treatment by heating. But, rosemary extract showed opposite result. It was supposed that rosemary extract had lower thermostability then tocopherol, because rosemary extract lost it's antioxidative activity during heating process. 2. The changes of acid value and anisidine value were more affected by heat treatment than the order of antioxidant treatment. 3. The oxidative stability measured by OSI showed same tendency as peroxide value. That is, the antioxidative activity of tocopherol in palm oil was more dependent on addition of antioxidants than heat treatment, but the rosemary extract had opposite character for antioxidative action in palm oil.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.5
• /
• pp.285-297
• /
• 2023

The effects of aging treatment sequence, specifically pre-aging and post-aging, on the microstructure and mechanical properties of Al-Zn-Mg-Cu aluminum alloys has been studied in comparison to symmetrically rolled specimens. In symmetrically rolled specimens, a straight-band precipitation distribution was observed, whereas asymmetrically rolled specimens exhibited a curved-band microstructure of fine precipitates. Notably, the asymmetrically rolled specimens displayed higher strengths. In the case of post-aging, the aging process occurred after rolling, and the dislocations generated during rolling acted as nucleation sites for precipitates during aging. This resulted in the formation of fine precipitates, contributing to improved mechanical properties compared to symmetric rolling. To enhance strength of the Al-Zn-Mg-Cu aluminum alloys, asymmetric rolling proves to be more effective than symmetric rolling, with post-aging showing greater efficacy than pre-aging.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.4
• /
• pp.35-44
• /
• 2002

The purpose of this study was to compare the effect of heat therapy, stretching exercise and to verify which method was most effective for lumbar flexibility improvement. Subjects were 20 apparantly healthy person(male10, female10) who did not have any medical problem. They were randomly divided and assigned into 2 groups: heat therapy, stretching exercise. For testing flexibility, trunk flexion, bunk extension, and Schober-test were performed. Pre-test was done prior to the each group's treatment. Test was done at 2nd week, 4th week and 6th week. There were no significant difference in improvement of trunk flexion and trunk extension after 6 weeks treatment among 2 methods. However in all 2 groups, there were statically significant improvement in flexibility as time go on. The rate of improvement was highest at 2nd week, while this was attenuated afterwards. The Schober-test score changed significantly from pre-test to the mid-test and to the post-test, while there were no significant difference among 2 methods of treatment. With the results above, it was concluded that heat therapy, stretching-exercise were all effective for improving flexibility without any significant priorities.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.2
• /
• pp.99-110
• /
• 1998

The effects of pre-heat treatment(Q/T) on microstructure and hardness of SCM435 structural steel nitrided by micro-pulse plasma was investigated. The quenching and tempering temperatures for obtaining matrix hardness of SCM435 steel on range of HRC30 to HRC40 desired for machine parts were about $860^{\circ}C$ and $500^{\circ}C$ respectively. The case depth of SCM435 nitrided at $480^{\circ}C$ for 5 hours was independent of pre-heat treatment condition and was approximately $150{\mu}m$. However, hardness and compactness of nitrified layer on Q/T treated specimen were more heigher than annealed specimen. The case depth increased linearly with the increase of nitriding temperature, however, the hardness of nitrified layer decreased with the temperature. Phase mixture of ${\gamma}^{\prime}$-phase($Fe_4N$) and ${\varepsilon}$-phase($Fe_3N$) were detected by XRD analysis in the nitrified layer formed at optimum nitriding condition, and only single ${\gamma}^{\prime}$-phase was detected in the nitrified layer formed at higher nitriding temperature such as $540^{\circ}C$. The optimum nitriding temperature was approximately $480^{\circ}C$ which is lower than tempering temperature for preventing softening behavior of SCM435 matrix during nitriding process and the surface hardness of nitrified layer obtained by optimum preheat treatment condition was about Hv930.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.229-234
• /
• 2008

Korea Electric Power Corporation (KEPCO) has started the nation's first biogas-microturbine project in the city of Gongju as an effort to encourage the utilization of wasted biogas containing useful energy source in the form of $CH_4$. The goal of the project is to set up the biogas microturbine co-generation system for utilizing biogas as an energy source and improving the economics of the wastewater treatment plant. Wastewater treatment processes were investigated in depth to find improvement possibility. Changes in internal recirculation ratio and pre-treatment degree are needed to optimize plant operation and biogas production. Biogas pre-treatment system satisfies Capstone's fuel condition requirement with the test result of 99.9% and 90.2% of hydrogen sulphide and ammonia is removal performance. Installation of microturbine and manufacture of heat exchanger to warm anaerobic digester has been done successfully. Expected economic profit produced by the system is coming from energy saving including electricity 115,871kWh/year and heat contained in exhaust gas 579GJ/year.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2004

Long length of Bi-2223/Ag superconducting wives were fabricated by stacking and drawing process with advanced heat-treatment schedules. Intermediate annealing was carried out to increase the homogeneity and uniformity of the superconducting filaments embedded in the silver matrix. Phase modification from tetragonal to orthorhombic Bi-2212 by pre heat treatment(PHT) was executed to improve the texture and phase transformation of Bi-2223. Drawing stress was measured to predict the sausaging and stress limit. Rolling Parameters such as thickness. width and winding tension were investigated to roll the tape with uniformity. 1 km length of Bi-2223/Ag superconducting wires were fabricated without any breakage. Critical current (Je) of 270 m length of superconducting tapes was measured over than $70 A/cm^2$ continuously after final sintering.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.247-251
• /
• 2002

In general, the bubbling, generated during the fabrication of the tapes, breaks the superconducting filament, and critical current of the tapes will be decreased. Heat-treatment schemes of Bi-2223/Ag HTS tapes were modified, such as pre-annealing of multi-stacked billet, 2-step main sintering and ramp rate etc. The generation of bubbling was drastically decreased from 20 bubbles/m to 0 ~ 1 bubble/m by the modified heat-treatment. Therefore, the value of critical current of the tapes without bubbling was increased almost twice higher than that of already existing tapes. Critical current up to 42 A in 40 m length Bi-22231Ag tapes have been measured at 77K, self-field, 1$mutextrm{V}$/cm criterion. It could be confirmed that elimination of bubbling is effective to maintain the superconducting property along the tape length.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.49-50
• /
• 2014

Dredged sea soil contains various contaminants. First priority to recycle dredged sea soil is to pretreat it to remove various contaminants because recycling dredge sea soil without any pre-treatment may cause a secondary contamination due to the leaching of hazardous chemicals. In this study, pretreated dredged sea soil was used to investigate pozzolanic activity. The properties of pretreated dredged sea soil were investigated, the method for heat treatment was determined, and the compressive strength of mortar using dredged sea soil was examined to evaluate pozzolanic activity. According to the results, pretreated dredged sea soil has some possibility to work as a pozzolanic material. When dredged sea soil was heat treated for 90min at 550℃, compressive strength was shown to be comparable to that of plain cement mortar.