• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.301-308
• /
• 2001

The problem of predicting crack propagation in anisotropic solids which is a subject of considerable practical importance is examined. The effect of the second term in the asymptotic expansion of the crack tip stress field on the direction of initial crack extension is made explicitly. We employ the normal stress ratio theory to determine values for the direction of initial crack extension. The theoretical analysis is performed for the wide range of the anisotropic material properties. It is shown that the use of second order term in the series expansion is essential for the accurate determination of crack growth direction in anisotropic solids.

• Journal of Digital Convergence
• /
• v.7 no.4
• /
• pp.11-19
• /
• 2009

Electronic methods are already used in money transfer and credit cards transactions and electronic money and checks, which can substitute cash and coins, are being discussed. Recently, the Acts of Electronic Draft have been enacted, in order to make the money in the market flow efficiently. Also electronic bill of lading has been adopted for the practical use of international shipments. However, despite of the effort from the academia and practice, investments to stocks, especially in the stock exchange, is not quite perfectly electronic. Japan enacted a relevant act in 2004 which make its stock market totally dematerialized. This writing summarizes some issues in interpretation that arise in the course of operation of the Stock Electronic Registration System at the present time of 6 months after it came into effect and its purpose, by doing so, is to prevent in advance the kind of problems in introducing the similar system to Korea.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.67-73
• /
• 1987

The feasibility for a practical use of underwater wet arc welding process is experimentally investigated by using low hydrogen and high oxide type electrodes and TMCP steel plates. Main results are summarized as follows: 1)The absorption speed of the coated low hydrogen and high titanium oxide type eletrodes becomes constant after about 30 minutes in water, and more steeping time in water does not influnce welding arc behavior. 2) By bead appearance and X-ray inspection, the high titanium oxide type electrode is better than the low hydrogen type in underwater arc welding process. 3) The mechanical properties of underwater wet arc welds depend upon welding conditions more than those of in-air welds, and the optimum welding condition can be obtained. 4) Because of quenching effect by rapid cooling rate in underwater wet welding, the maximum hardness of HAZ is increased relatively higher in underwater wet welding, process.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.879-881
• /
• 2000

This paper treats the electromagnet type linear synchronous motor with induction operation. The proposed motor consists of the primary winding energized by variable frequency supplies and the secondary having an additional solid-conductor besides the field finding. The conductor is useful for not only the self-starting but also the damping effect In the synchronous drive. From the investigation by the experiment and the finite element analysis coupled with both electric circuit and motion equation we verify that the proposed motor is effective for practical use.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.891-893
• /
• 2000

Because of linear operation by direct drive and compact system, and the free accumulation of position error, LPM is suitable for proportional control valves actuator. In this study, to develop electromagnetic proportional valves actuator we designed tooth shape of double sides LPM and suggested the driving principle based upon the excitation method, It's the magnetic structure is so complex by the cubic effect configuration that finite element analysis is required. By the 3D finite element analysis, we got the magnetic distribution of LPM and analyzed static thrust force characteristics. By this analyzation, we obtained basic data required for the practical use of driving system for the proportional control valves. Thus, considering electrical and mechanical constants we could design and manufacture double sides LPM for the proportional control valves.

• Journal of Mechanical Science and Technology
• /
• v.15 no.11
• /
• pp.1517-1523
• /
• 2001

The effect of power supply voltage on the performance limits in a laboratory magneto-rheological fluid based device was identified by experiments. It suggests that the frequency range of motion for control is limited by the voltage attenuation due to the coil inductance and the maximum power supply voltage set for practical use of an MRF devices. In this work, the magnetic and electrical characteristics of the MRF device are investigated and a design procedure is formulated to achieve the desired performance for a given power supply.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.67
• /
• pp.93-102
• /
• 2001

Many companies in Korea have introduced and put Six Sigma to the practical use recently, others are under consideration to introduce it. As we consider how to recognize and to apply it, we are able to know there is a difference among companies and it differently influence on those companies. In this paper, we analyze the structural differences between Quality Management and Six Sigma movements through the questiionnaire designed effectively to investigate them. We also examine the controversial points, suitability as the management model, the level of Quality Management and Six Sigma movements, and analyze how much the movements effect on the management activities. Finally, we show how to improve the Quality Management and Six Sigma movements in Korean companies.

• Nuclear Engineering and Technology
• /
• v.49 no.1
• /
• pp.234-244
• /
• 2017

Natural frequencies of immersed square sections decrease due to a contribution of added mass to the movement of square sections. In this study, natural frequencies of square sections are obtained as a function of gap size between the square section and a rigid square wall using the finite element method. Additionally, they are used to extract the added mass effect on translational and rotation motions. Published information and studies on the translational and torsional vibration of square beams are also examined for practical use. D coupling of a square section is also investigated for multiple square sections. The suggested added mass estimation can be applicable to the spent fuel storage design of a pressurized light water modulated nuclear power plant.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.765-768
• /
• 2004

This study reports the site application of the early strength development technology for form stripping earlier than normal state in the apartment construction. It is a method of framework rationalization and it needs the technology of early strength development concrete and 6-day cycle process. We applied the method to the apartment construction to reduce the floor construction period and to maximize the economical effect by reduction of the period of total construction. As a result, we confirmed the superior property of the early strength development of the concrete and reliable success of 6-day cycle process.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.257-264
• /
• 2001

To propose the construction of architectural interior design and communication using graphic, web3D, it was studied the kind and character of various representation methods that can be embodied in an architectural interior design on the web, and looks into whether these ways can be adapted to an architectural interior design process. Especially, the use of the current techniques on graphic and CAD data give the most suitable effect by using the integrated data such as vector animation, an interaction of object VR(Virtual Reality), a high quality of panorama VR, and data treatment and its interaction of drawing of cad data. As a result, the single data format shows not only one image representation but also a stream of continuous operation through a change into another format. But this desired study expects that another next studies will go on interaction and integration of digital format with increase of transmission speed expected in the future, and a digital model and its practical methods.