• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.1-7
• /
• 2019

본 논문에서는 영상신호를 필터링 하기 위해 필요한 현실적인 수학적 모델을 제시한다. 1차원 신호 뿐 아니라 2차원 또는 다차원 신호처리 및 분석에서 필터는 영상처리, 컴퓨터 비전, 패턴 인식 등의 다양한 분야에서 근본적이고 중요한 과정을 수행한다. 일반적인 신호처리에서 신호를 주파수 영역에서 해석할 경우 1차원 신호 영역에서의 이상적인 (저역통과) 필터는 직사각형 형태를 가지고 있듯이, 2차원 신호의 이상적인 필터는 원 형태를 가지고 있다. 본 논문에서는 주파수 영역에서 활용할 수 있는 실용적이고 효율적인 다각형 형태의 영상 필터 모델을 제안한다. 본 논문은 2차원 영상을 필터링 하기 위해 원형 필터를 사용하는 대신 육각형 형태의 필터를 모델링하여 적용한다. 이것은 무선 통신 시스템에서의 주파수 재사용 개념을 도입함으로서, 영상 필터링에서도 주파수 대역을 효율적으로 사용하기 위함이다. 본 논문에서 제시한 육각형태의 필터를 활용한 영상 필터링의 시뮬레이션 결과를 제시하고, 성능을 PSNR로 계산한 결과 제안한 방법이 이상적인 필터의 대안으로서 가능함을 보인다.

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.39-46
• /
• 2010

IIn this study, used is the equivalent loading method based on the inherent strain to predict the welding deformation of panel members. Equivalent loads are computed from the inherent strain distribution around weld line, and then applied for the linear finite element analysis. Thermal deformation of panel members can be, of course, carried out through the rigorous thermal elasto-plastic analysis procedure but it is not practical in applying to predicting the welding deformation of large structures such as blocks found in a ship structure from view of computing time. The present equivalent load approach has been applied to flat plate model to verify the present approach, and to several curved plate models having the curvature in the welding direction to investigate the effect of the longitudinal curvature upon the weld-induced deformation. The results are compared with those by thermal elasto-plastic analysis. As far as the present results are concerned, it can be said that the present approach shows good agreement with the results by welding experiment and the rigorous thermal elasto-plastic analysis. The present approach has been also applied to predict the welding deformation of panel block as for application illustration to practical model.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.7-13
• /
• 2011

A study on reliability estimation of sequential-ordered multiple failure modes, which are sequentially ordered between failure modes in a considering system, was performed. Especially, an approach to estimate the probabilities of failure modes has been proposed under an assumption that failure modes are mutually exclusive and sequentially ordered by only a critical variable. A feasibility of the proposed approach were studied by a practical example, which is a reliability estimation of passive safety systems for a probabilistic safety assessment(PSA) of a very high temperature reactor(VHTR) that is under development as a future nuclear system with enhanced safety features. It is difficult to define a robust failure state of this nuclear system because of its enhanced radiation release characteristics, so the new approach is a useful concept to estimate not only its safety but also a PSA. A feasibility study applied two failure modes(e.g., small and large release of radioactive materials) with considering the integrated behavior of this nuclear system. It is expected that the multiple release states for a practical estimation can be easily extended to the aforementioned example. It was found out that the proposed approach was a useful technique to cover the unfavorable features of this nuclear system as to performing a VHTR PSA.

• Advances in aircraft and spacecraft science
• /
• 제6권2호
• /
• pp.169-187
• /
• 2019

This work presents a practical detailed finite element (FE) approach for the three-dimensional (3D) free-vibration analysis of actual aircraft and spacecraft-type lightweight and thin honeycomb sandwich panels. It consists of calling successively in $MATLAB^{(R)}$, via a developed user-friendly GUI, a detailed 3D meshing tool, a macrocommands language translator and a commercial FE solver($ABAQUS^{(R)}$ or $ANSYS^{(R)}$). In contrary to the common practice of meshing finely the faces and core cells, the proposed meshing tool represents each wall of the actual hexagonal core cells as a single two-dimensional (2D) 4 nodes quadrangularshell element or two 3 nodes triangular ones, while the faces meshes are obtained simply using the nodes at the core-faces interfaces. Moreover, as the same 2D FE interpolation type is used for meshing the core and faces, this leads to an automatic handling of their required FE compatibility relations. This proposed approach is applied to a sample made of very thin glass fiber reinforced polymer woven composite faces and a thin aluminum alloy hexagonal honeycomb core. The unknown or incomplete geometric and materials properties are first collected through direct measurements, reverse engineering techniques and experimental-FE modal analysis-based inverse identification. Then, the free-vibrations of the actual honeycomb sandwich panel are analyzed experimentally under different boundary conditions and numerically using different mesh basic cell shapes. It is found that this approach is accurate for the first few modes used for pre-design purpose.

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2009년도 춘계학술대회
• /
• pp.76-84
• /
• 2009

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2007년도 추계국제학술대회 및 컨퍼런스
• /
• pp.85-122
• /
• 2007

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2009년도 춘계학술대회
• /
• pp.74-75
• /
• 2009

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2006년도 추계학술대회 및 정기총회
• /
• pp.213-217
• /
• 2006

• 공학교육연구
• /
• 제18권3호
• /
• pp.39-45
• /
• 2015

Many methods have been suggested for a creative problem solving approach. TRIZ approach is ranked top in its practical application because it is originated from the real patent analysis. This approach is assumed to be generic which can be applied to any types of problems regardless of problem type and its domain. The objective of this study is to propose a creative problem solving approach using TRIZ's contradiction analysis, then introduce a case study of applying this approach to a creative design coursework. Main topic covers a creative problem solving approach, a problem definition using TRIZ contradiction analysis, finding invention principles, and problem solving from the generic approach. For the course project, Roborobo tool is adopted to implement the design concept. This coursework helps students finding a general problem solving approach, and applying a generic solution for their specific problem domain.

• 산업경영시스템학회지
• /
• 제25권3호
• /
• pp.41-49
• /
• 2002

In the study, for the practical approaches of job shop scheduling, we propose the new dispatching rules of job shop scheduling in order to complement the practical applications in the existing researches. The assumed situation for the practical approaches considers the following; relaxation of assumption for capacity constraint by machine flexibility, the addition of the common use of jig and fixture, unbalanced machine workloads and duedate tightness, and produces fast rescheduling that reflects unexpected situations. The performance of the new dispatching rules is compared and analyzed with the existing methods through the computer experiments in the assumed conditions. The results can be useful to improving a field application of the job shop scheduling.