• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.625-631
• /
• 2014

We propose a compact power-on reset circuit consisting of a switched capacitor, a capacitor, and a Schmitt trigger inverter. A switched capacitor working with a clock signal charges the capacitor. Thus, the voltage across the capacitor is increased toward the supply voltage. The circuit provides a reset pulse until the voltage across the capacitor reaches the high threshold voltage of the Schmitt trigger inverter. The proposed circuit is simple, compact, has no static power consumption, and works for a wide range of power-on rising times. Furthermore, the clock signal is available while the reset pulse is activated. The proposed circuit works for up to 6 s of power-on rising time, and occupies a $60{\times}30{\mu}m^2$ active area.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.876-883
• /
• 2012

The paper investigates three types of transfer function methods for detecting displacements of winding in a model transformer. To acquire these transfer functions, the measuring method of input voltage, current and its response is used in impulse method. The applied impulse voltages had three rising times, which were short rising time (less than 0.6 ${\mu}s$), medium rising time (about 0.8 ${\mu}s$) and long rising time (about 1 ${\mu}s$) in front waves. Every 10 measurements of voltage and current waves were averaged from 50 measurements of voltage and current waves. These transfer functions were tested in normal, 24mm elevated and 48mm elevated windings conditions and were analyzed with correlation coefficients and spectrum deviations. In the analysis, the results depend on the types of transfer functions and the rising times of input voltages.

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.143-147
• /
• 2009

Inkjet printing makes use of ink droplets to form required patterns on a substrate. In order for the inkjet technology to produce reliable patterning tools, the jetting performance needs be controlled precisely. For controlling ink jetting performance, input waveform should be properly designed. In the past, the research was focused on designing dwell time of the input waveform for controlling jetting speed. However, the jetting performance is also closely related to rising and falling time. In this study, the effect of the rising and falling time on droplet speed will be investigated by measuring the droplet speed. In this study, the power OP amp (PA98A) was used in order to drive piezo inkjet head by amplifying the waveform generated from arbitrary function generator. The experimental results show that change of rising and falling time in the waveform not only affect the droplet speed but also optimal dwell time.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.128-135
• /
• 2013

본 논문에서는 고전압 공정기술을 이용하여 고속 디밍제어가 가능한 고출력-LED 드라이버를 설계하였다. 제안하는 고출력-LED 드라이버는 디밍신호를 통해서 LED에 필요한 전류량을 예측하고, 예측된 전류의 일부분을 인덕터 전류로 피드백시키는 방법을 사용하여서, LED 전류 상승시간이 최소화되도록 설계하였다. 기존 고출력-LED 드라이버의 최소 LED 전류 상승시간은 $3{\mu}s$로 제한된 반면 제안하는 고출력-LED 드라이버의 최소 LED전류 상승시간은 1/10 정도로 감소되었다. 설계된 LED 드라이버는 $0.35{\mu}m$ 60V BCDMOS 2-poly 4-metal 공정으로 제작되었으며 측정 결과 입력전압 12V, 9개의 백색 LED, 353mA LED전류, 1KHz 디밍주파수에서 LED전류 상승시간과 전력전달효율은 각각 240ns, 93.7%로 측정되었다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
• /
• pp.227-230
• /
• 2002

이 논문에서는 신경회로망을 이용한 원전 금속파편 시스템에 적용하여 진단 가능성을 제시한다. 첫 번째로, 오경보 감소에 대해 역전파 신경망을 적용하여 오경보 감소에 대한 가능성을 제시하였다. 즉, 전처리 단계에서 이동 평균 필터를 적용하여 저주파수인 배경잡음을 소거하였으며, 충격신호의 시작시간, 상승시간, 반주기, 전체시간을 신경망의 입력 값으로 사용하였다 발전소 운전가동시의 오경보 및 충격시험시의 신호를 적용한 결과 오경보가 1/4 이내로 줄어드는 유용한 결과를 보임을 알 수 있었다. 두 번째로 신경회로망 이론을 금속파편 진단(질량추정)에 적용하여 진단 가능성을 제시하였다. 신경회로망에서 사용된 알고리즘은 역전파 알고리즘(Back Propagation Network)을 사용하였으며, 세 가지의 입력변수(Rising Time, Half Period, Maximum amplitude)를 이용하였다. 영광 3호기 시운전시 강구의 충격 데이터로 미리 학습을 시킨 후 실제 금속파편 신호와 비교/분석하여 질량값을 추정하였다. 분석한 결과 비교적 만족할 만한 결과를 얻어 금속파편 진단에 신경회로망의 적용이 가능할 것으로 판단하였다.

• 설비공학논문집
• /
• 제16권5호
• /
• pp.430-437
• /
• 2004

This paper is intended as an investigation of study on the thermal and electrical characteristics of the carbon heating element. In this experimentation, the electric material used is the crystalline graphite a kind of natural graphite. The bentonite is used to solidify the heating element and the vacuum furnace is used for sintering it. It is noted that the natural drying time should be at least 58 hours. The plating of the electric pole with the electroless nickel showed the lowest contact resistance among others. The resistance shows linear variation with regard to length. For the insulation and resolution, the glaze coating is best with 80% of water content. The temperature rising characteristic of the heating element is better than sheath heater saving 43% of rising time. The correlation equation for temperature was obtained with the electric power.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.95-99
• /
• 2002

The Loose Part Monitoring System(LPMS) has been designed to detect. locate and evaluate detached or loosened parts and foreign objects in the reactor coolant system. In this paper, at first, we presents an application of the back propagation neural network. At the preprocessing step, the moving window average filter is adopted to reject the reject the low frequency background noise components. And then, extracting the acoustic signature such as Starting point of impact signal. Rising time. Half period. and Global time, they are used as the inputs to neural network . Secondly, we applied the neural network algorithm to LPMS in order to estimate the mass of loose parts. We trained the impact test data of YGN3 using the backpropagation method. The input parameter for training is Rising clime. Half Period amplitude. The result shored that the neural network would be applied to LPMS. Also, applying the neural network to thin practical false alarm data during startup and impact test signal at nuclear power plant, the false alarms are reduced effectively.

• Journal of Power Electronics
• /
• 제4권2호
• /
• pp.112-116
• /
• 2004

The pulsed power systems have been widely used many other countries and their new applications have been developed by many researchers, such as E/P(Electrostatic Precipitator) to remove the industrial dust, DeNOx/DeSOx power systems, ozone generators and power sources of the laser beam, etc. In this paper, we studied the cascading technique as a new technology consisted of two pulse transformers and obtained their experimental data and results. To obtain the high pulsed voltage adopted cascading technique, we designed our compact pulse generator and tested by adjusting the value of the load resistors to obtain high pulsed voltage with steep rising time and duration time. We explained their experimental results that obtained by adopting cascading technique. Also, we compared theoretical value with measured value obtained by using the cascading method.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.88-99
• /
• 2007

In this paper, a novel new pulse power generator based on IGBT stacks is proposed for pulse power application. Because it can generate up to 60kV pulse output voltage without any step- up transformer or pulse forming network, it has advantages of fast rising time, easiness of pulse width variation and rectangular pulse shape. Proposed scheme consists of series connected 9 power stages to generate maximum 60kV output pulse and one series resonant power inverter to charge DC capacitor voltage. Each power stages are configured as 8 series connected power cells and each power cell generates up to 850VDC pulse. Finally pulse output voltage is applied using total 72 series connected IGBTs. To reduce component for gate power supply, a simple and robust gate drive circuit is proposed. For gating signal synchronization, full bridge invertor and pulse transformer generates on-off signals of IGBT gating with gate power simultaneously and it has very good characteristics of short circuit protection.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.46-48
• /
• 2019

본 논문은 Discontinuous Conduction Mode(DCM) 플라이백 컨버터로 생성한 고전압 펄스를 스파크 갭으로 펄스 상승 시간을 줄이는 방법에 관하여 다룬다. 이러한 방법으로 생성된 빠른 상승률 특성을 가지는 고전압 펄스 전원장치는 친환경 가스 처리 분야에 사용할 수 있다. 기존 스태킹 구조의 펄스 전원 장치는 많은 수의 스위치들과 에너지 저장 소자가 필요하므로 부피가 커지고 제조 단가가 증가하는 반면, 분 논문에 제안된 전원 장치는 구조를 단순화하여 전체 시스템의 소형화 및 제조 단가를 낮춘 점을 특징으로 한다. 제안된 설계 토폴로지는 플라이백 변압기 2차 측에 다이오드의 사용 유무에 따라 두 개의 변형된 회로로 응용 가능 하다. 변압기 2차측에 다이오드를 사용하면, 음의 성분 없이 깨끗한 고전압 출력 펄스를 만들 수 있지만 사용한 다이오드의 전압 정격을 고려해야 한다. 다이오드를 사용하지 않는다면, 고전압 출력 펄스에 음의 성분이 발생하지만 비용과 부피를 최대한 줄일 수 있다. PSIM 시뮬레이션을 사용하여 제안하는 전원 장치의 23kV, 0.5 ㎲, 10 ns rising time의 출력 펄스 발생 성능을 검증하고, 다이오드 사용에 따른 출력 펄스의 차이점을 비교하였다.