• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.186-194
• /
• 1998

Species composition and biomass of intertidal benthic algae were studied at the coast of Yonggwang Nuclear Power Plant area and its adjacent stations over 4 seasons (October 1995-August 1996), Of 68 species identified, 7 were Cyanophyta, 12 were Chlorophyta, 14 were Phaeophyta and 35 were Rhodophyta. The largest number of algal species (44) was found at Sangnok, the northernmost station of the study area, whereas the smallest number of species (15) was found from Tongho, ca. 13 km north of the power plant site. Number of species showed highest during the spring (44) and minimum was recorded in autumn (28). Biomass per unit area showed maximum in spring ($189.5\;g\;dry\;wt{\cdot}m^{-2}$ in average) and minimum in winter ($107.9\;g\;dry\;wt{\cdot}m^{-2}$ in average). Biomass values exhibited a wide range of variation among the stations, ranging from a low of $22.0\;g\;dry\;wt{\cdot}m^{-2}$ in annual average at Tongho to a high of $295.7g\;dry\;wt{\cdot}m^{-2}$ in average at Sangnok. Dominant species in biomass were Corallina pilulifera, Sargassum thunbergii, Gymnogongrus flabelliformis and Enteromorpha compressa. There have been little variation in the dominant algal species around the power plant site during the past 10 years and also these algae appeared throughout the west coast of Korea with higher frequency.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.311-316
• /
• 2013

In this study, the wave energy potential (WEP) was evaluated using the wave data measured at nine stations along the Korean east coast and compared with the results of previous studies. Along the Korean east coast, seasonal variations in the WEP were around 6.4 kW/m in winter and 1.2 kW/m in summer, greater than spatial variations of 2.5~4.3 kW/m. In most stations, the wave power during June to July were shown to be smallest. The estimated annual average WEP was greatest in the Mukho and Jukbyeon stations located in the middle of the Korean east coast at around 4.3 kW/m, and smallest in the Jinha station at around 2.5 kW/m. The results found using the previous hindcast data showed WEP having a tendency to decrease from south to north. However, in this study, the WEP showed a tendency of being greatest in the middle of the Korean east coast and decreasing in both north and south directions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.2
• /
• pp.101-108
• /
• 2016

In designing of the wind power facilities, the highest and lowest astronomical tides (HAT and LAT) are needed in terms of an international design tidal water levels. The AHHW and ALLW, however, have been used as the design tidal levels in Korea. The HAT and LAT in the Wido coastal sea should be estimated to satisfy the standard because the pilot wind power facilities will be located in the adjacent Wido coastal sea. In this study, the HAT and LAT are estimated using the 31-years hourly tidal elevation data of the Wido tidal gauging station and the nodal variation patterns of the major lunar components, such as $M_2$, $O_1$, and $K_1$, are analysed to check the expected long-term lunar cycle, i.e., 18.61-year's nodal variation patterns. The temporal amplitude variations of the $M_2$, $O_1$, and $K_1$ clearly show the 18.61-years periodic patterns in case of the no-nodal correction condition. In addition, the suggested HAT and LAT elevations, estimated as the upper and lower confidence limits of the yearly HAT and LAT elevations, show 40 cm greater than AHHW and 35 cm lower than ALLW, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2018

In this paper, we present a robust beamforming design to tackle the weighted sum-rate maximization (WSRM) problem in a multicell multiple-input multiple-output (MIMO) - non-orthogonal multipleaccess (NOMA) downlink system for 5G wireless communications. This work consider the imperfectchannel state information (CSI) at the base station (BS) by adding uncertainties to channel estimation matrices as the worst-case model i.e., singular value uncertainty model (SVUM). With this observation, the WSRM problem is formulated subject to the transmit power constraints at the BS. The objective problem is known as on-deterministic polynomial (NP) problem which is difficult to solve. We propose an robust beam forming design which establishes on majorization minimization (MM) technique to find the optimal transmit beam forming matrix, as well as efficiently solve the objective problem. In addition, we also propose a joint user clustering and power allocation (JUCPA) algorithm in which the best user pair is selected as a cluster to attain a higher sum-rate. Extensive numerical results are provided to show that the proposed robust beamforming design together with the proposed JUCPA algorithm significantly increases the performance in term of sum-rate as compared with the existing NOMA schemes and the conventional orthogonal multiple access (OMA) scheme.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.314-320
• /
• 2014

Regarding the design of the gas sweetening absorber, the gas distribution analysis for the increase of the sour gas removal and reduction of the tower height is very important research topics. Recently, regarding the $CO_2$ capture technology which is a promising option for the reduction of the greenhouse gas (GHG), the need for the gas distribution improvement is increased as the gas treating capacity increases. In this paper, we have investigated the sour gas distribution in the absorber using CFD (Computational Fluid Dynamics) based on 10 MW post-combustion $CO_2$ capture plant installed in Boryeong power station, Korea Midland Power company. For this purpose, we suggested the three possible technology options (splash plate, spiral gas line and U-tube) for the gas distribution enhancement and compared the effect of the each cases. The result showed that the U-tube installed in the absorber increase the gas distribution about 30% compared to the base case, while the delta P increasement was about 10%. From these results, it was found that the U-tube installation is an effective technology option for the gas distribution enhancement in the gas sweetening absorber.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.20-40
• /
• 2003

Since unloaded Q-value of a high-temperature superconductor(HTS) filter is very high, a bandpass filter(BPF) and a lowpass filter(LPF) with an increase of pole numbers can be fabricated without an increase of an insertion loss(IL) ; recently a 70-pole BPF is developed in USA. They have an abrupt skirt property and an excellent attenuation level for out-of band. Moreover, they can be miniaturized when lumped element resonators or the slow-wave characteristic are used. Technology of fabricating a HTS epitaxial film as well as a film of a 4 inch area also makes the planar type filter with a various structure and an enhanced power handling capability possible. Recently, the HTS filter subsystems composed of a planar-type HTS filters, a GaAs-based LNA and a mini-cryocooler are developed. The extended receiver front- end subsystems for mobile radio communications decrease the noise-figure level of the communication system and the frequency interference interacted adjacent bands, and increase the efficiency of frequency and the capacity of communication system. In this paper, theory for developing the HTS filter, its kinds, its design rules, its characteristics are reviewed. The feature of the research and market trends related to the HTS filter systems for the receiver front-end subsystem of mobile base station are surveyed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.29-45
• /
• 2017

Ad hoc sensor network is characterized by decentralized structure and ad hoc deployment. Sensor networks have all basic features of ad hoc network except different degrees such as lower mobility and more stringent energy requirements. Existing protocols provide different tradeoffs among some desirable characteristics such as fault tolerance, distributed computation, robustness, scalability and reliability. wireless protocols suggested so far are very limited, generally focusing on communication to a single base station or on aggregating sensor data. The main reason having such restrictions is due to maximum lifetime to maintain network activities. The network lifetime is an important design metric in ad hoc networks. Since every node does a router role, it is not possible for other nodes to communicate with each other if some nodes do not work due to energy lack. In this paper, we suggest an experimental ad-hoc on-demand distance vector routing protocol to optimize the communication of energy of the network nodes.The load distribution avoids the choice of exhausted nodes at the route selection phase, thus balances the use of energy among nodes and maximizing the network lifetime. In transmission control phase, there is a balance between the choice of a high transmission power that lead to increase in the range of signal transmission thus reducing the number of hops and lower power levels that reduces the interference on the expense of network connectivity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5314-5324
• /
• 2015

The present study was intended to measure the relationship between job stress and job satisfaction among nurses working for a general hospitals. The self-administered questionnaires were given to 312 nurses during the period from February 25 to March 16, 2013. As a results, the level of job satisfaction of subjects was significantly lower in high group than low group in job demand, but it was significantly lower in low group than high group in job control, supervisor support and coworker support. In correlations, job satisfaction were found to be in a negative correlation with job demand, whereas in positive correlation with job control, supervisor and coworker support. In logistic analysis, the odds ratio of job satisfaction on job demand were significantly increased in the high group than in low group, but job control supervisor and coworker support were significantly decreased in the high group than in low group. In hierarchial multiple regression analysis, the affecting factors to the job satisfaction was selected variables such as educational background, work station, subject satisfaction of work, career choice motives, turnover experience, job stress contents(job demand, job control, supervisor support and coworker support). especially, job stress contents was significantly increased of explanatory power of job satisfaction. It suggested that the level of job satisfaction got more power by addition of job stress contents.

• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.369-377
• /
• 2007

This study investigated the effect of ginseng products on the baking properties of white breads. Flour was substituted by ginseng products (ginseng at levels 2, 4, 6, and 8%, all w/w, of flour levels). Both ginseng powder (GP) and red ginseng powder (RGP) were used. Similarly, red ginseng extract (RGE) was substituted at levels of 1, 2, 3, and 4% (all w/w) of flour. The physical properties of each dough were assessed using farinograms, extensograms, and amylograms. Water absorption increased as the proportions of ginseng products rose. The dough surface areas and R/E (resistance/extensibility) values decreased, as did peak viscosities, at the proportions of ginseng products increased. The pH values during fermentation decreased as the proportions of ginseng products increased. The fermentation power of dough with GP was lower than that of control, and higher than that of dough with RGP or RGE, but the addition of ginseng products beyond certain levels weakened the gas retention power: The specific loaf volumes of breads with 2% GP were the highest at 5.41 mL/g. In breads with RGE, the specificloaf volume increased from 5.52 mL/g to 5.82 mL/g as RGE levels rose from 0% to 4%. Hardness increased with rising GP and RGP levels in breads with GP and RGP, but decreased with RGE levels in breads with RGE. The moisture contents of breads during storage tended to be higher than control in breads with ginseng products. Lightness increased with addition of GP and decreased upon addition of RGP or RGE, while redness and yellowness increased after addition of any ginseng products. In sensory evaluation tests, the sensory scores for texture, color, mouth feel, and overall acceptability, were high, when any ginseng product (GP, RGP or RGE) was present at 2%. Of these breads, the bread with 2% RGE attained the highest sensory score.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1050-1057
• /
• 2006

This paper proposes a new predistortion linearizer with amplitude modulator and PFG(Polar Function Generator) using second order harmonic signals. This linearizer consists of PFG that combine with in-phase and quadrature-phase of second harmonic signals and amplitude modulator in main path. The predistorted third order intermodulation distortion(IMD3) signals that are generated by amplitude modulator with fundamental and PFG signals, improve a amplifier nonlinear characteristics. The proposed linearizer and amplifier have been manufactured and tested to operate in cellular base-station transmitting band$(869\sim894MHz)$. The test results show that IMD3 can be removed by more than 22.5 dB in case of CW 2-tone signals ${\Delta}f=1$ MHz, and the adjacent channel power ratio(ACPR) also can be improved by more than 8.4 dB for CDMA IS-95 1FA signals.