• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.13-18
• /
• 2019

The high energy penalty in amine-based post-combustion CO₂ capture process is hampering its industrial scale application. An advanced process is designed by intensive heat integration within the conventional process to reduce the stripper duty. The study presents the technical feasibility for stripper duty reduction by intensive heat integration in CO₂ capture process. A rigorous rate-based model has been used in Aspen Plus® to simulate conventional and advanced process for a 300 MW coal-based power plant. Several design and operational parameters like split ratio, stripper inter-heater location and flowrate were studied to find the optimum values. The results show that advanced configuration with heat integration can reduces the stripper heat by 14%.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.63-67
• /
• 1997

We have experimentally investigated the fiber four-wave mixing effect on equal spaced multichannel optical transmission system with dispersion shifted fiber. To reduce the fiber four-wave mixing effect, we set the polarization states of the adjacent channels to be orthogonal each other by using polarization controller. In this case, we can reduce the transmission power penalty by 1.5 dB compared with that of equal polarization states.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.538-540
• /
• 2004

차세대 인터넷 어플리케이션으로서 각광받고 있는 다양한 실시간 멀티미디어 서비스들이 기존 인터넷망에서 유니케스트 라우팅 방식으로 제공되면서 사용자수의 한계와 서버의 부하 문제에 따른 여러 문제점을 안고 있다. 이로 인해 한번에 여러 사용자들에게 동일한 데이터를 보내야 하는 멀티미디어 서비스의 경우에는, 각 사용자들에게 데이터를 여러 번 전송하는 유니캐스트 라우팅(Unicaast Routing)방식에 비해 멀티캐스팅(Multicast Routing)방식으로 전송하는 것이 대역폭 활용면에서 더 효율적이다. 그러나 Multicast Routing 을 DWDM 기반의 차세대 광인터넷망에 적용하기에는 optical signal splitter의 사용으로 인한 cost의 증가와 Power Penalty 의 보상 문제 등 해결해야 할 여러가지 문제가 남아있다. 따라서 본 논문은 이러한 제한 사항을 극복하기 위해서 제한된 노드에 대해서만 optical signal splitter 를 사용하는 Virtual Source 기반의 Multicast Routing 알고리즘을 제안한다.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.265-268
• /
• 2003

In this paper, we propose new simple and efficient stopping criteria for W-CDMA turbo decoding. The new criteria are based on the sum of logarithm of absolute extrinsic information values and the count of one-estimations calculated after each component decoder. The calculation of the proposed criteria can be made simpler by summing one of ten values without any penalty. This Proposed method can be implemented with negligible overhead and no extra memory. Simulation results on W-CDMA standard shows that the number of iterations required is reduced compared to the existing stopping criteria without degrading the BER performance. Reduced iterations and simple operations make the proposed criteria desirable for low-power turbo decoder.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2008

We have theoretically investigated the asymmetry effects on 10[Gb/s] optical duobinary transmitters from the viewpoint of the driving voltage ratios by computer simulations. For driving voltage ratios(=driving voltage/switching voltage) with smaller than 100[%], the transmission performance has been greatly affected by the asymmetry of the bandwidth of LPFs than that of the Mach-Zehnder Modulator driving voltage. On the other hand, for driving voltage ratios with 100[%], the transmission performance has been degraded by the asymmetry of the driving voltage and is not sensitive to that of the bandwidth of LPFs. For the transmission performance within 1[dB] power penalty under the asymmetry condition, the driving voltage ratio with 100[%] has performed better than the low driving voltage ratios.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.772-774
• /
• 2000

The objective of a cathodic protection system (CP) is to protect the buried metallic structure against the corrosion caused by chemical reaction between the buried structure and the surrounding medium, such as soil. This paper presents a boundary element application to determine the optimal impressed current densities in a cathodic protection system. The potential within the electrolyte is described by the Laplace's equation with nonlinear boundary conditions which are enforced based on experimentally determined electrochemical polarization curves. The optimal impressed current densities are determined in order to minimize the power supply for protection. The solution is obtained by using the conjugate gradient method in which the governing equations and the protecting conditions are taken into account by the penalty function method. Numerical example are presented to demonstrate the practical applicability of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1111-1113
• /
• 1998

A robust economic dispatch algorithm involving transmission losses is proposed and investigated for a possibility of on-line applications. In this paper, the penalty factors are calculated directly from transposed Jacobian of load flow analysis with advantages of superiority to B-coefficients method based on its computation time and suitability for real time application since the approach is based on a current system condition. The proposed algorithm is systematically handling the generation capacity constraints with transmission losses. Implementation of the algorithm for IEEE systems and EPRI Scenario systems shows that computation time is enough to apply on-line economic dispatch to large power system and production cost is saved compared with the crude classical economic dispatch algorithm without considering transmission losses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.539-546
• /
• 1997

In this paper, we proposed a new mehtod to analyze the performance degradation by timing jitters in the APD (avalanche photodiode) receivers of intensity modulation/direct detection digital optical communication systems where raised cosine pulse-shaping filters are used to reduce the effect of noise while minimizing intersymbol interferences. The proposed analytical method is an extension of an analytical method we have already developed for pin diode receivers, and incorporates the effects of APD's multiplication factor and resulting shot noise. Using the proposed analytical method, we derive an approximated power penalty due to timing jitters based on an assumption of Gaussian distribution for timing jitters, and compare with that of the conventional analytical method. The results obtained from the proposed analytical method show that conventional analytical methods underestimate the influence of timing jitters on the reciver performance. The results also show that APD's multiplication factor which optimizes receiver sensitivity is smaller than that obtained by the conventional analytical method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05b
• /
• pp.829-836
• /
• 2002

The paper presents a multi-objective genetic algorithm approach to the design of a water distribution network. The objectives considered are minimization of network cost and maximization of a reliability measure. In this study, a new reliability measure, called network resilience, is introduced. This measure mimics a designer's desire of providing excess power at nodes and designing reliable loops with practicable pipe diameters. The proposed method produces a set of Pareto-optimal solutions in the search space of cost and network resilience. Genetic algorithms are observed to be poor in handling constraints. To handle constraints in a better way, a constraint handling technique that does not require a penalty coefficient and applicable to water distribution systems is presented. The present model is applied to two example problems, which were widely reported. Pipe failure analysis carried out on some of the solutions obtained revealed that the network resilience based approach gave better results in terms of network reliability.

• ETRI Journal
• /
• v.41 no.5
• /
• pp.619-625
• /
• 2019

In this paper, we propose an array pattern synthesis scheme using semidefinite programming (SDP) under array excitation power constraints. When an array pattern synthesis problem is formulated as an SDP problem, it is known that an additional rank-one constraint is generated inevitably and relaxed via semidefinite relaxation. If the solution to the relaxed SDP problem is not of rank one, then conventional SDP-based array pattern synthesis approaches fail to obtain optimal solutions because the additional rank-one constraint is not handled appropriately. To overcome this drawback, we adopted a bisection technique combined with a penalty function method. Numerical applications are presented to demonstrate the validity of the proposed scheme.