• 제목/요약/키워드: power line communication technology

검색결과 294건 처리시간 0.028초

전력선 통신(PLC)을 이용한 난방기기 제어 및 원격제어 시스템의 개발에 관한 연구 (A Study on the development of Heating Facility Control and Remote Control System using Power Line Communication (PLC))

  • 김용태;신관우;이윤섭
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.65-67
    • /
    • 2001
  • PLC (Power Line Communication) is the communication method using the existing power line installed in houses and offices to convert and transmit high frequency communication signal from tens of KHz to tens of MHz, and receive the filtered signal using high frequency filter. The advantage of PLC is that PLC uses the existing power line installed in houses and offices so it does not require separate power line. Easy and convenient access using electric outlets is another advantage of PLC. However, PLC has some disadvantages such as limited transmission power, high load interference and noise, variable signal attenuation, characteristic of impedance selective possibility of frequency property. This study designed the boiler temperature control system by unit using the modem designed on the basis of technology used for PLC modem, and designed remote control system using internet. After conducting experiments with those two systems, it was possible to control stably. By commercializing this product, we can avoid unnecessary heating of separate temperature control unit, and save the cost according1y, and it is possible to control on a remote site using internet in a more convenient way.

  • PDF

전력선 채널에서 음향신호의 OFDM 변조 전송 특성 (OFDM Modulation Transmission Characteristic of Acoustic Signal on Power Line Channel)

  • 허윤석
    • 정보학연구
    • /
    • 제6권4호
    • /
    • pp.1-9
    • /
    • 2003
  • 본 연구는 저압 전력선 망을 통한 전력선 통신(PLC: Power Line Communication)에 관한 내용이다. 전력선 통신이 가지는 주요 잇점은 기존의 인프라구조의 사용이다. 전력선 통신 채널은 전형적으로 전력선의 길이와 주파수가 증가함에 의해 신호 감쇠를 나타내는 주파수 선택적 페이딩(Frequency-Selective Fading)을 가지는 다중경로 반사 전파로 모델링 할 수 있다. OFDM(Orthogonal Frequency Division Multiplexing)은 다수개의 낮은 데이터 율의 반송파들이 높은 전송율을 이루는 형태로 송신기에서 조합되는 변조 기법이다. 모델링한 다중 경로 반사 전력선 채널에 음향 신호를 입력하여 체계의 성능을 모의 실험을 통해 분석, 검증하였다.

  • PDF

딥 러닝 기반의 잡음 모델링을 이용한 전력선 통신에서의 잡음 제거 (De-noising in Power Line Communication Using Noise Modeling Based on Deep Learning)

  • 선영규;황유민;심이삭;김진영
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권4호
    • /
    • pp.55-60
    • /
    • 2018
  • 본 논문은 전력선 통신에서 딥 러닝 기술 적용시킨 연구의 초기 결과를 보여준다. 본 논문에서는 전력선 통신의 성능을 감소시키는 원인인 잡음을 제거하기 위해 딥 러닝 기술을 적용시켜 효과적인 잡음 제거를 목표로 하고 수신 단에서 딥 러닝 모델을 추가하여 잡음을 효과적으로 제거하는 시스템을 제안한다. 딥 러닝 모델을 학습시키기 위해서는 데이터가 필요하므로 기존의 데이터들을 저장하고 있다고 가정하고 제안하는 시스템에 대해 시뮬레이션을 진행하여 부가 백색 가우시안 잡음 채널의 이론적 결과와 비트 에러률을 비교하여 제안하는 시스템 모델이 잡음을 제거하여 통신 성능을 향상시킨 것을 확인한다.

전력설비 관리를 위한 무선 및 유선 통신 방법에 관한 고찰 (A Investment on Wire-wireless Communication Method for Electrical Device Infrastructure Maintenance)

  • 김영억;이진
    • 전기학회논문지
    • /
    • 제65권2호
    • /
    • pp.354-359
    • /
    • 2016
  • Power plants maintenance data is to be sent to management server system via a communication network. In this case, reliable communication network is required. Transmission of the power plants maintenance data is used in the wired communication network or wireless communication network. PLC communication network is a kind of wired communication network. However PLC communication network is easily affected by noise. On the vulnerable areas in power line system, such as a mountain or rural areas, it is difficult to form a power line communication network. For a wireless communication, environment are also influenced factors in wireless communication. Harsh environmental factors are bring the communication characteristic degradation. In such areas it can be used a combination of two networks and in this way the complementary function can be achieved. Power plants are distributed in various regions across the country. The appropriate communication network is needed to maintain the power plant.This study investigated the effect of environment on the wired communication and wireless communication. It would examine a variable factor which is affect to the communication characteristic. We used PLC communication for wired communication network and ZigBee communication for wireless communication network. We investigated the characteristics of a single communication network and it raised the need for a complex communication technology to complement a single communication network.

전력선통신 기반 저압원격검침 시스템의 공간 정보를 활용한 지능형 배전망 지리정보시스템 구축에 관한 연구 (A Study on the Implementation of Geographic Information System for an Intelligent Power Distribution Network with Location Informations of Power Line Communication-based Automatic Meter Reading System)

  • 서충기;이승걸
    • 전기학회논문지
    • /
    • 제64권3호
    • /
    • pp.365-369
    • /
    • 2015
  • In this paper, geographic information system(GIS) for an intelligent power distribution network was implemented with location informations acquired from automatic meter reading system, where the location informations of power line communication(PLC) modems installed at customer side were collected at data concentration units(DCUs) of headend equipment via PLC and then were transmitted to front end processor server. By displaying the connection status of the power distribution network on GIS map, operation of advanced metering infrastructure(AMI) or management of power grid system could be performed intuitionally and in real time, because the configuration state of the power grid could be easily monitored. The feasibility of the proposed system was confirmed with the especially constructed laboratory-level test bed and the verification test of the system will be carried out for a real power distribution network.

전력선 통신 채널에서 직류전원 공급장치의 간섭 영향 (Effect of Interference from DC Power Supply on Power Line Communication Channel)

  • 김성언;전태현
    • 한국인터넷방송통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.111-115
    • /
    • 2014
  • 전력선 통신은 전기를 사용할 수 있는 어느 곳에서든지 데이터 전송 네트워크를 구축하기 위해 사용할 수 있다. 이러한 종류의 통신 시스템은 스마트 그리드와 홈 네트워크를 포함한 다양한 적용 분야에서 네트워크 구축을 위한 기반으로 제공된다. 반면에 전력선 통신은 다양한 종류의 간섭과 잡음에 취약하다. 또한 네트워크에 연결된 전기적 부하의 양과 종류에 따라 전력선 통신 채널의 특성이 지속적으로 변화한다. 특히 일상생활에서 스마트 기기의 폭발적인 증가에 의한 직류전원 공급장치의 사용이 증가함에 따라 전력선 통신 채널의 간섭 영향이 증가한다. 본 논문에서는 실험을 통하여 직류전원 공급장치의 동작에 따른 전력선 통신 채널의 영향과 데이터 전송 성능을 분석한다.

Limited Feedback Interference Alignment in MIMO Power Line Communication with Common-mode Reception

  • Ahiadormey, Roger Kwao;Anokye, Prince;Park, Seok-Hwan;Lee, Kyoung-Jae
    • 한국정보기술학회 영문논문지
    • /
    • 제9권2호
    • /
    • pp.1-14
    • /
    • 2019
  • This paper considers a multiple-input multiple-output (MIMO) power line communication (PLC) network where interference alignment (IA) technique is used to mitigate the interference that arises in multi-user networks. IA as a precoding technique requires perfect channel state information (CSI) to achieve maximum multiplexing gain. Due to the common-mode reception at the receiver ports, we assume imperfect CSI for the IA precoding design. Here, the CSI is quantized and sent via feedback to the transmit ports. For different levels of CSI quantization, we evaluate the performance of various IA algorithms via Monte Carlo simulations. Simulation results reveal the superior performance of the proposed scheme due to common-mode reception in IA MIMO PLC networks. It is shown that for a quantization level of 5 bits, the CM reception improves the sum-rate by up to 70%.

효율적인 전력선통신 라우팅 경로 탐색 기법 (An Efficient Routing Path Search Technique in Power Line Communication)

  • 서충기;김준하;정준홍
    • 전기학회논문지
    • /
    • 제67권9호
    • /
    • pp.1216-1223
    • /
    • 2018
  • As field of application of AMI, AMR uses the power line as the primary means of communication. PLC has a big merit without installation of the new network for communication in a field using the power line which is the existing equipment. However, there is a serious obstacle in commercialization for the instability by noise and communication environment. Therefore, the technical method for maintaining the communication state which overcome such demerit and was stabilized is required essentially. PLC routing technology is applied with the alternative plan now. The routing technology currently managed by field includes many problems by applying the algorithm of an elementary level. PLC routing path search problem can be modeled with the problem of searching for optimal solution as similar to such as optimal routing problem and TSP(Travelling salesman problem). In this paper, in order to search for a PLC routing path efficiently and to choose the optimal path, GA(Genetic Algorithm) was applied. Although PLC was similar in optimal solution search as compared with typical GA, it also has a difference point by the characteristic of communication, and presented the new methodology over this. Moreover, the validity of application technology was verified by showing the experimental result to which GA is applied and analyzing as compared with the existing algorithm.

전력선 통신의 RF 유도형 결합기 해석 (Analysis of RF Inductive Couplers for Power Line Communication)

  • 노영석;이건복;박위상
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제1권1호
    • /
    • pp.85-91
    • /
    • 2015
  • 전력선 통신에서 사용되는 비접촉식 커플러의 신호 전달 특성을 향상시키기 위한 비접촉식 커플러의 구조와 자기장 결합에 대한 연구를 수행하였다. 비접촉식 커플러의 결합 구조를 분석하였고, Rogowski 코일을 이용한 커플러와 자성체 코어를 이용한 커플러를 제작하여 구조에 따른 신호 전달 특성을 분석하였다. 집중 정수 소자와 임피던스 트랜스포머를 이용한 임피던스 매칭법을 제안하여 협대역과 광대역에서 신호 전달 특성을 향상시켰고 전달 신호의 크기는 대역폭과 트레이드오프가 있음을 보였다. 본 연구는 추후 부하 변동에 따른 임피던스 매칭 연구에 도움을 줄 수 있다.

근거리의 자외선 비가시거리 통신에 관한 연구 (Study on Short-range Non-line-of-sight Ultraviolet Communication)

  • 박동국
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제36권1호
    • /
    • pp.179-184
    • /
    • 2012
  • 기존의 무선 RF 통신은 근거리에서 전력손실이 상대적으로 크고, 전파간섭 및 방해, 재밍 등에 민감하다. 이러한 단점을 보완하는 대안으로 자외선을 이용한 통신 방식에 대한 연구가 최근 관심을 받고 있다. 본 논문에서 자외선을 이용한 비가시거리 통신의 data rate 특성에 대해 시뮬레이션한 결과를 제시하였다. On-off keying 방식을 사용하는 비가시거리 자외선 통신에서 data rate는 송신 빔의 방향, 수신빔의 빔 폭, 송신 전력에 의해 큰 영향을 받는다는 것을 확인하였다.