• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.157-160
• /
• 2001

We studied about the lighting control system on pc using PLM(Power Line Modem). The PLM is composed of FSK IC-chip and the circuit for the power line communication. We developed the control program using visual c++ language on PC for dimming the lamps. In this paper dimming controller was made with PIC161F874 and its communication speed was 1200 boad rates.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2258-2260
• /
• 2001

최근 급속한 하드웨어 및 소프트웨어 기술의 발달로 인하여 PC기반의 분산제어 시스템들이 산업계에 모습을 보이고 있다. 발전소 시뮬레이터는 발전소의 모든 운영을 통제하는 중앙제어실과 똑같은 형태 및 동작특성을 갖춘 설비로 운전원들이 정상적 상황은 물론 가상적인 사고상황에서도 긴급 대응할 수 있도록 훈련에 이용되는 모의훈련 시스템이다. 본 논문에서는 제어 자동화 통신망으로 떠오르고 있는 필드버스와 함께 시뮬레이터 판넬에 설치된 수만개에 달하는 각종 입출력 신호들을 분산된 PC 시스템에서 수집하고 이 신호들을 실시간 통신기술을 이용하여 원격의 현장(시뮬레이션 컴퓨터)까지 송수신해 주는 입출력 제어 시스템의 설계에 관한 내용을 소개한다. 특히 분산된 PC 시스템 구조와 각 시스템에 탑재될 소프트웨어 모듈들 그리고 TCP/IP를 대신하여 사용하고 있는 필드버스 프로토콜 드라이버의 설계에 관한 내용을 중심으로 소개하고자 한다.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1956-1959
• /
• 2002

Power control (PC) on the reverse link of CDMA cellular system is important to increase system capacity. PC eliminates fluctuations in the received signal level and hence reduces the required signal-to-interference ratio. However, both perfect PC and imperfect PC depend on number of interferences as number of users, which by using smart antenna system can decrease number of interferences in any directions except interferences from the main beam direction. In this paper , number of elements in smart antenna system, which directly relates to the main beam pattern, is studied to find the effects on the outage probability , bit energy-to-interference density ratio (Eb/Io) and the capacities of both perfect and imperfect PC.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.89-97
• /
• 2013

The green IT technology is being introduced in diverse sectors, especially in the data center and green computer sectors. Rack-type PCs, which have been developed by improving the computer hardware, are effective for data centers and large businesses, but they are not usually introduced in small organizations such as small and medium businesses and schools because they require high initial costs. Power-saving PC software enables the inexpensive power control, but the installation of the power-saving software in all computers in the organization is not an easy task. Computer users in the organization are usually not cooperative as they do not think the power-saving cost is directly related to themselves. In this paper, a technique wherein the server has a restriction in providing the IP address to the computers that has no power-saving software is proposed, so that users will cooperate in the PC power-saving system to avoid inconvenience. In order to provide restricted IP address periodically, the server makes a request of power-saving software installation check for user's PC. Proposed technique is more effective ways to save computer energy, because it does not depend on specific systems or organizations.

• Journal of Wind Energy
• /
• v.15 no.1
• /
• pp.60-68
• /
• 2024

In this study, a hardware-in-the-loop simulation (HILS) environment was established using MATLAB/Simulink to simulate and verify the power performance of a wind turbine. The target wind turbine was selected as the NREL 5 MW model, and modeling was performed based on the disclosed specifications. The HILS environment consists of a PC equipped with a MATLAB/Simulink program, a programmable logic controller (PLC) for uploading and linking control algorithms, and data acquisition (DAQ) equipment to manage wind turbine data input and output. The operation of the HILS environment was carried out as a procedure of operation (PC) of the target wind turbine modeled based on MATLAB/Simulink, data acquisition (PLC) of control algorithms, control command calculation (PLC), and control command input (PC). The simulation was performed using the HILS environment under turbulent wind conditions and compared with the simulation results performed under the same conditions in the HILS environment using the commercial program Bladed for performance verification. From the comparison, it was found that the dynamic simulation results of the Bladed HILS and the MATLAB HILS were close in power performances and the errors in the average values of rotor rotation speed and power generation between the two simulations were about 0.44 % and 3.3 %, respectively.

• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.859-863
• /
• 2005

This paper describes the improvement of power control characteristics of ship's emergency lighting power supply(SELPS), by which electric power is controlled extensively, and power ON-OFF is controlled and system parameter monitored in remote distance by PC serial communication. Proposed system is composed of step-down converter(SDC), emergency power supply circuit(EPSC), half bridge(HB) inverter, fluorescent lamp(FL) starting circuit, microprocessor control and multi communication circuit. Experimental works confirm that relative system stops when over current is detected and speedy and stable emergency power is supplied when main power source cut-off, and controls input power up to 35[$\%$] by adjusting pulse frequency of the HB inverter, and ON-OFF control of multiple SELS, real time transmission and monitor of parameters as to voltage, current, and power values are performed appropriately by PC communication.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.30 no.9
• /
• pp.71-78
• /
• 2012

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.49.2-49.2
• /
• 2011

본 논문에서는 대용량 태양광 PCS의 병렬운전 알고리즘에 대해 제안한다. 제안한 알고리즘은 dc-link 전압을 이용하여 PCS를 독립적으로 제어한다. 일반적으로 태양광 PCS는 정격용량 또는 그 근처에서 최대 효율을 낸다. 제안한 알고리즘은 일사량이 적을 시 일부 PCS만 작동하도록 하여 전력 변환 효율을 높인다. 항상 모든 PCS가 작동하는 것이 아니라 필요한 수량만 작동하도록 하고, 작동하는 PCS도 순차적으로 바꿔서, 전제 시스템의 수명을 늘리는 효과도 있다. 또한 일부 PCS가 고장이 날 경우 다른 PCS가 작동하도록 하여 태양광 발전이 멈추지 않고 계속 발전할 수 있도록 한다.

• Journal of Power System Engineering
• /
• v.14 no.1
• /
• pp.40-46
• /
• 2010

This paper shows the development process for measuring three-dimensional flow velocity components in a web-browser. The system is developed in an embeddable C/C++ interpreter Ch and Ch-CGI toolkit. The interface for the web-based measurement system consists of a set of web HTML files and Ch files for CGI. All of data in web browser are passed to Ch-CGI script to generate the output of new HTML file. PC-Server and PC-Client can submit measurement parameters and receive the text/graphical results each other. PC-Client can control the test equipment by using a parameters that received from PC-Server. It also can pass the test results between the web-based measurement system. In summary, the designed measurement system is evaluated, the outputs shown well on the web browser.

• Journal of Integrative Natural Science
• /
• v.11 no.1
• /
• pp.44-50
• /
• 2018

In this paper, we propose a context-aware power management (CPM) scheme using beacons to reduce the power consumption of personal computers (PCs). In the proposed CPM scheme, the PC, smartphone, control server, and Internet of Things (IoT) device are necessary. PC users first log in the control server using their smartphones and select PCs to turn on. Then, the selected PCs automatically go into three different modes, i.e., sleep, shutdown, and standby power off modes, in order when the PC users leave the PCs without turning off them. Further, we develop a testbed with the proposed CPM scheme using the Arduino with Bluetooth low energy (BLE) and relay modules. Finally, it is shown that the proposed CPM scheme outperforms the conventional scheme in terms of the power consumption.