• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1214-1217
• /
• 2018

In this paper, we propose the development of a Small $360^{\circ}$ Oral Scanner embedded board. The proposed small $360^{\circ}$ oral scanner embedded board consists of image level and transfer method changing part FPGA part, memory part and FIFO to USB transfer part. The image level and transmission mode change unit divides the MIPI format oral image received through the small $360^{\circ}$ oral cavity image sensor and the image sensor into low power signal mode and high speed signal mode and distributes them to the port and transfers the level shift to the FPGA unit. The FPGA unit performs functions such as $360^{\circ}$ image distortion correction, image correction, image processing, and image compression. In the FIFO to USB transfer section, the RAW data transferred through the FIFO in the FPGA is transferred to the PC using USB 3.0, USB 3.1, etc. using the transceiver chip. In order to evaluate the efficiency of the proposed small $360^{\circ}$ oral scanner embedded board, it has been tested by an authorized testing institute. As a result, the frame rate per second is over 60 fps and the data transfer rate is 4.99 Gb/second

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.491-498
• /
• 2020

Recently, In the production line of batteries, charge and discharge tests are essential to verify battery characteristics. In this case, the battery charging uses a unidirectional AC/DC converter capable of output voltage and current control, and the discharge uses a resistive load. Since this method consumes energy during discharge, it must be replaced with a bi-directional AC/DC converter system capable of charging and discharging. Although it is difficult to replace the connected inverter part of the bi-directional AC/DC converter system due to the high cost, the spread of the solar-connected inverter rapidly increases as the current solar supply business is activated, and thereby the solar-connected type Inverter prices are plunging. If it can be used as a power converter for battery discharge without program modification of the solar-powered inverter, it will have competition. In this paper, propose a new battery discharge system using a combination of a photovoltaic DC/DC simulator and photovoltaic PCS using a battery to be used as a power converter for battery discharge without program modification of a low-cost photovoltaic inverter. In addition, propose an optimal solar characteristic curve for the stable operation of PCS. The validity of the proposed system was verified using a 500[W] class solar DC/DC simulator and a solar PCS prototype.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.552-558
• /
• 2014

This paper suggests how to design a ZigBee-chip-based communication module to remotely measure radiation level. The suggested communication module consists of two control processors for the chip as generally required to configure a ZigBee system, and one chip module to configure a ZigBee RF device. The ZigBee-chip-based communication module for remote radiation measurement consists of a wireless communication controller; sensor and high-voltage generator; charger and power supply circuit; wired communication part; and RF circuit and antenna. The wireless communication controller is to control wireless communication for ZigBee and to measure radiation level remotely. The sensor and high-voltage generator generates 500 V in two consecutive series to amplify and filter pulses of radiation detected by G-M Tube. The charger and power supply circuit part is to charge lithium-ion battery and supply power to one-chip processors. The wired communication part serves as a RS-485/422 interface to enable USB interface and wired remote communication for interfacing with PC and debugging. RF circuit and antenna applies an RLC passive component for chip antenna to configure BALUN and antenna impedance matching circuit, allowing wireless communication. After configuring the ZigBee-chip-based communication module, tests were conducted to measure radiation level remotely: data were successfully transmitted in 10-meter and 100-meter distances, measuring radiation level in a remote condition. The communication module allows an environment where radiation level can be remotely measured in an economically beneficial way as it not only consumes less electricity but also costs less. By securing linearity of a radiation measuring device and by minimizing the device itself, it is possible to set up an environment where radiation can be measured in a reliable manner, and radiation level is monitored real-time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.623-628
• /
• 2009

The emergence of compact and low-power wireless communication sensors and actuators in the technology supporting the ongoing miniaturization of processing and storage allows for entirely the new kinds of embedded systems. These systems are distributed and deployed in environments where they may have been designed into a particular control method, and are often very dynamic. Collection of devices can communicate to achieve a higher level of coordinated behavior. Wireless sensor nodes deposited in various places provide light, temperature, and activity measurements. Wireless sensor nodes attached to circuits or appliances sense the current or control the usage. Together they form a dynamic and multi-hop routing network connecting each node to more powerful networks and processing resources. Wireless sensor networks are a specific-application and therefore they have to involve both software and hardware. They also use protocols that relate to both applications and the wireless network. Wireless sensor networks are consumer devices supporting multimedia applications such as personal digital assistants, network computers, and mobile communication devices. Wireless sensor networks are becoming an important part of industrial and military applications. The characteristics of modem embedded systems are the capable of communicating adapting the different operating environments. In this paper, We designed and implemented sensor network system which shows through host PC sensing temperature and humidity data transmitted for wireless sensor nodes composed wireless temperature and humidity sensor and designs sensor nodes using embedded system with the intention of studying USN.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.260-270
• /
• 2007

Owing to the improved wireless communication technologies, it is possible to provide streaming service of multimedia with PDAs and mobile phones in addition to desktop PCs. Since mobile client devices have low computing power and low network bandwidth due to wireless network, the transcoding technology to adapt media for mobile client devices considering their characteristics is necessary. However, since mobile clients use wireless network and the wireless network have less stable bandwidth according to distance from AP and environments, it is hard to support stable QoS to mobile clients. In this paper, we propose a dynamic bit rate control method for transcoding in order to supprot stable QoS of streaming media service to mobile clients via wireless network. The proposed method is shown to serve seamless streaming media service with adaptive bit rate control according to state of wireless network in real time and to reduce transmission failure from experiment.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.31-37
• /
• 2018

Energy Storage System(ESS) is a system that maximizes energy efficiency by selectively storing and using the generated power when needed. Therefore, energy must be able to be charged or supplied at any time, and non-operating time should be minimized even in the case of failure or maintenance. However, current large-capacity energy storage systems must be shut down during maintenance due to structural problems. In this paper, we propose a PCS for 1MW ESS by configuring modular for large capacity ESS in parallel and verified of the hot swap technology that can replace, change, and repair the components that make up the system while keeping the system operating.

• The Korean Journal of Rehabilitation Nursing
• /
• v.3 no.2
• /
• pp.228-242
• /
• 2000

Meridian massage is originated from oriental medical manipulation, and it has been mainly applied to as pain and paralysis. The purpose was to develop new method of nursing care for help hemiplegic patients to recover their functions of upper limbs and to reduce depressions. This study was carried out between 8, March, and 8, June, 2000 and the subjects of the study were .60 hemiplegic stroke patients who were participants at a hospitalized in K oriental medical center. The experimental group(30) and the control group(30) were assigned by means of participation order. The experimental group took meridian massage on affected upper limb for 10 minutes daily for 2 weeks. We evaluated muscle power and endurance with band from AVIVA corp.; range of motion with goniometer; shoulder pain with visual analogue scale; swelling with Jeweiers ring measurement of Dirette; depression with self-rating depression scale translated into Korean by Yang(1982). Data were analyzed by SPSS PC and the results are described below. The experimental group showed better muscle power and endurance than control group. Range of motiont of affected shoulder improved significantly in experimental group. Also, the experimental group showed less shoulder pain, hand edema, depression than control group. In this study, we observed that meridian massage is an effective nursing care in improving the function of upper limb and managing depression of stroke patients.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.4 no.2
• /
• pp.159-171
• /
• 1998

The purpose of this study is to explore the relationships between hope, health locus of control and general health of nursing students. The subjects of this study were 161 female students of National Nursing School in Seoul. Data was collected through a questionnaire from May 11 to May 23, 1998. The tools used for this study were Hope scale developed by Miller and Power, Multidimensional Health Locus of Control Scale developed by Wallston and Wallston and General Health Scale(Modified Conel Medical Index) developed by Nam Ho Chang. Data were analysed in an the $SPSS/pc^+$ program using frequency for the demographic characteristics, 1-test and ANOVA for relationship between the variables and demographic characteristics and for it's differences of hope and general health control. Peason correlation coefficient for relationship between the 3 variables, hope, health locus of control, and general health. The results of this study were as follows ; The 1st hypothesis : that 'Between hope, health locus of control (HLC) and general health of nursing students will have positive relationship', was supported(=.2883, p=.000). The 2nd hypothesis; that 'The hope score of nursing students in HLC-internal group will be higher than others' was supported(F=5.22, p=.0063). The 3rd hypothesis ; that 'The general health of nursing students in HLC -internal group will be higher than others' was accepted(F=2.94, p=.0554). The 4th hypothesis ; that 'Hope, HLC and general health of nursing students according to demographic characteristics will be different ' was accepted in part. o In hope the more age, the higher score. o In HLC the group of non religious have higher score(t=-2.02, p=.045). o No experienced addmission was revealed HLC-internal group(t=-1.91, p=.058). o Non religious group has a tendency to dependent upon on powerful other person(t=-1.99, p=.049). o The hope score of nursing students was very high(4.49/6point). o The general health status of nursing students was vert good(92.88/114point). o Most of nursing students was in HLC-internal group(81.4%). o The most frequent complaints of nursing students was dizziness suddenly developed(68.4/114point), very nervous in small thing(67.83/114) and very nervous to others critics(68.4/114) in turn. In conclusion, the students who have high score of hope, in HLC-internal group have good general health. Hope inspiring not only makes one's good health but also makes others good health and powering hope. For good health person who are in HLC-internal group have powerful hope, keeping good health would be a good stretegy to change the student's HLC and make them good health and hope powering then it would be a good method to change the HLC to HLC-internal group.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.3
• /
• pp.325-334
• /
• 2014

The effects of aloe on liver function and lipid metabolic disorders induced by alcohol consumption were studied in rats using aloe power (0.25%, 0.5%, 1%) and 10% ethanol. 35 Sprague-Dawley (male, 4 weeks old) rats were divided into five groups and fed experimental diets for six weeks. Body weights of rats tended to be lower in all alcohol supplemented groups than in the control. Food intakes and dry feces per day were significantly lower in all alcohol supplemented groups than in the control. Atherogenic indices (AI) were highest in the alcohol group and decreased in proportion with aloe amount. Serum triglyceride level was significantly higher in the alcohol group than in the control, but tended to be lower in the aloe supplemented groups. In relation to liver function, glutamate oxaloacetate transaminase (GOT), glutamate pyruvate transaminase (GPT), and alkaline phosphatase (ALP) activities tended to be higher in the alcohol groups than in the control, but lower in the aloe groups, especially in the alcohol+0.5% AO group. The levels of liver cholesterol were significantly lower in the alcohol group than in the control and aloe supplemented groups. In the histochemical evaluation, fat droplets appeared extensively on the liver-lobule in the alcohol group, whereas they decreased slightly in the alcohol+0.25% AO group and apparently disappeared in the alcohol +0.5% AO. On the other hand, fat droplets appeared again on the liver-lobule in the alcohol+1% AO group, but were reduced compared with the alcohol group. Regarding the fatty acid composition of adipose tissue triglycerides, the level of linoleic acid (18:2) was significantly higher in the aloe supplemented group. Regarding the fatty acid composition of liver phosphatidylcholine (PC), the level of linoleic acid was higher in the alcohol group and alcohol+1% AO group than the other groups. In contrast, the level of arachidonic acid was significantly lower in the alcohol group. As a result, arachidonic / linoleic acid ratios were significantly lower in the alcohol group compared to the control group, whereas the ratios of the aloe supplemented groups were similar to that of the control group. Therefore, aloe had some beneficial effects on lipid metabolic disorders induced by alcohol and affected desaturation of fatty acids.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.6
• /
• pp.57-65
• /
• 2007

This paper presents the design of single phase PFC(Power Factor Correction) using a DSP(TMS320F2812). In order to realize the proposed boost PFC converter in average current mode control, the DSP requires the A/D sampling values for a line input voltage, a inductor current, and the output voltage of the converter. Because of a FET switching noise, these sampling values contain a high frequency noise and switching ripple. The solution of A/D sampling keeps away from the switching point. Because the PWM duty is changed from 5% to 95%, we can#t decide a fixed sampling time. In this paper, the three A/D converters of the DSP are started using the prediction algorithm for the FET ON/OFF time at every sampling cycle(40 KHz). Implemented A/D sampling algorithm with only one timer of the DSP is very simple and gives the autostart of these A/D converters. From the experimental result, it was shown that the power factor was about 0.99 at wide input voltage, and the output ripple voltage was smaller than 5 Vpp at 80 Vdc output. Finally the parameters and gains of PI controllers are controlled by serial communication with Windows Xp based PC. Also it was shown that the implemented PFC converter can achieve the feasibility and the usefulness.