• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.182-192
• /
• 1997

The well-known standard normal distribution has been used within the limit of standard variable value of u=3.59. However, the probability values above the limit are not given in the literature. In this study, a probability computation program for standard normal distribution to u=5.99 with the proportional normal distribution a, pp.oximation suggested by Abramowitz and Stegun, Hastings is developed. The new standard normal distribution table developed by the program is presented and will be of help to estimate of probability values for testing and estimation of process mean value, lot acceptable probability, defective percentage of PPM unit of an out-of specification limit, process capability, test power of control charts, probability and statistics.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.8 no.1
• /
• pp.40-49
• /
• 2000

The capillary tube performance for R-407C is experimentally investigated. The experimental setup is a real vapor-compression refrigerating system. Mass flow rate is measured for various diameter and length while inlet pressure and degree of subcooling are changed. These data are compared with the results of a numerical model. The mass flow rate of the numerical model is about 14% less than the measured mass flow rate. It is found that mass flow rate and length for R-407C are less than those for R-22 under the same condition. Based on this experimental study and the numerical model, a set of design charts for capillary tube of R-407C is proposed.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.11
• /
• pp.1374-1381
• /
• 1999

This paper describes development of a package for generator maintenance scheduling program with user-friendly interactive mode. Generator maintenance scheduling is to select desirable maintenance periods of generators in the given interval satisfying reliability or economic criteria. Window-based system for user-friendly mode and Oracle-based database system for efficient data management are established in our package. Reserve rate levelization and LOLP minimization are performed in calculation mode, which is composed of DLL programs. Many graphs and charts are illustrated for the user-analysis. Operation is carried out by day-based unit, not by week. The case study has been conducted with the data of practical KEPCO power system in 1999 and successfully demonstrated its effectiveness.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.483-490
• /
• 2015

There are many software reliability models that are based on the times of occurrences of errors in the debugging of software. It is shown that it is possible to do likelihood inference for software reliability models based on finite failure model and non-homogeneous Poisson Processes (NHPP). For someone making a decision about when to market software, the conditional failure rate is an important variables. The infinite failure model are used in a wide variety of practical situations. Their use in characterization problems, detection of outlier, linear estimation, study of system reliability, life-testing, survival analysis, data compression and many other fields can be seen from the many study. Statistical process control (SPC) can monitor the forecasting of software failure and thereby contribute significantly to the improvement of software reliability. Control charts are widely used for software process control in the software industry. In this paper, proposed a control mechanism based on NHPP using mean value function of Musa-Okumo and Power law type property.

• Child Health Nursing Research
• /
• v.7 no.1
• /
• pp.85-95
• /
• 2001

The purpose of this study was to reveal what influences the divergent methodological researches have brought the nursing practice in during the past 3 decades. The nursing record sheets ie, the nursing discourses were analyzed to know the knowledges that were recorded, accepted and communicated in nursing practice at pediatric intensive care units, and unclosed the philosophical and methodological position of that knowledges. The texts were 13 sheets, 3 kinds of nursing record(7 24hours flow charts, 4 nursing information record sheets and 2 transfer record sheets) used at 4 hospitals. The unit of analysis was 'word'. First, all words of the sheets were listed up, clustered into categories based on their contents. And then, the larger conceptual themes were drawn to elucidate the effect of the knowledge/power and the philosophical and methodological position of that knowledges. To enhanced the validity of the analysis, the data were analyzed by two researchers. The 'words' were classified into 3 categories; 'general information', 'assessment' and 'inter-vention'. The conceptual themes of the texts were 'the gaze for quantification and objectification' and 'technical/assimilated caring'. This themes reflected the logic positivistic and biomedical view that had dominated at clinical practice. Nursing has endeavored to resist the logic-positivistic knowledge/power and to established the nursing knowledge/power based on multiple philosophies and methodologies, especially phenomenological-interpretative. But the results of this study revealed that such efforts in nursing theory and research couldn't influenced the knowledge of practice. Logic positivism was yet so strong and the biomedical model yet dominated in the clinical practice. It identified that the borrowed theory and the knowledge from the received view gave nursing the power. But they were modalities that reinforced the dominant, medical power. Nursing has investigate the other positions (feminism, Habermas' critical social theory and Foucault's discourse theory). This positions suggest different assumptions but share the common concepts; equality, emancipation and freedom. The important point is how make these concepts the practical for nursing knowledge/power in practice. We must recognize that the praxis at clinical setting take place at the field unlike theoretical praxis. The change of clinical practice is the social, economic and political change.

• Journal of Information Science Theory and Practice
• /
• v.5 no.3
• /
• pp.61-70
• /
• 2017

This study investigated the use of e-journals by health researchers in the Nigerian Institute of Medical Research (NIMR). A descriptive survey method was adopted for the study and a questionnaire was used for data collection. The study population was comprised of fifty-four (54) respondents who are health researchers in the institute. The data collected were presented and analyzed using tables, frequency distribution, simple percentages, and charts. The result of the study revealed that all the respondents are aware of the availability of e-journals and attest to making use of them. The study revealed that electronic journals were mostly used for the purpose of conducting research work and the PDF format was preferred for downloading e-journals. However, it was observed that low Internet connectivity and intermittent electricity supply constitute a major obstacle to the use of e-journals. The study, therefore, recommended that the institute's management invest more resources on network connectivity, particularly its bandwidth, and ensure reliable power supply.

• Korean Journal of Community Nutrition
• /
• v.21 no.1
• /
• pp.84-92
• /
• 2016

Objectives: This study was performed to develop a food safety education program for school foodservice employees and evaluate its effectiveness. Methods: Food safety education programs were made into two levels; one for new employees in school foodservice and another for employees in charge of Critical Control Point (CCP) monitoring. The programs were for 40-minute-long lecture using PowerPoint. The effectiveness of these programs were assessed based on eleven evaluation items by school foodservice dieticians (n=30) and the Hazard Analysis Critical Control Point (HACCP) specialist (n=13). All statistical analyses are conducted by SPSS package program (ver 20.0). Results: According to the results of evaluating the food safety education program by dietitian and HACCP specialist, the overall satisfaction score was 4.14, evaluated by 5 point scale. There were no significant difference in results of evaluation between dieticians and HACCP specialists. The score of 'it is helpful to work' and 'pictures, images and charts are pertinent to study' were higher than others while the score of 'education contents is pleasant and interesting' and 'screen is pleasant and interesting' were the lowest among all evaluation items. Conclusions: To increase the school foodservice quality, employees should be offered regular food safety education and training through effective education media including prerequisite program and HACCP manual for school foodservice.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.1
• /
• pp.233-241
• /
• 1999

Control chart is a very extensively used tool in testing whether a process is in a state of statistical control or not. In this paper, we propose a robust EWMA(exponentially weighted moving averages) control chart for variables, which is based on the Huber's M-estimator. The Huber's M-estimator is a well-known robust estimator in sense of distributional robustness. In the proposed chart, the estimation of the process deviation is modified to have a s table level and high power. To compare the performances of the proposed control chart with other charts, some Monte Carlo simulations we performed. The simulation results show that the robust EWMA control chart has good performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.3
• /
• pp.373-380
• /
• 2019

In this paper, a pico hydro turbine employing low head circulation water at fish farms is designed and evaluated. Due to the advantages of simple structures, small head requirements, and low-cost investment, the constant thickness propeller turbine is considered as a feasible solution. The design process based on the free vortex method is presented in full detail, and a 4-blade runner is built using BladeGen. The turbine performance is analyzed both numerically and via experimental methods. Despite slight differences, the results show similar trends between CFD simulations and experiments carried out on factory test-rigs in a wide range of working conditions. At the design flow rate, the turbine achieves the best efficiency of 70 %, generating 3.5 kW power when rotating at 420 rpm. The internal flow field, as well as the turbine's behavior, are investigated through the distribution of blade streamlines, pressure, and velocity around the runner. Moreover, the pressure coefficient on the blade surface at 3 span positions is plotted while the head loss for each simulation domain is calculated and displayed by charts.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.1
• /
• pp.23-37
• /
• 2011

The scaling properties on the length distribution of microcrack populations from Tertiary crystalline tuff are investigated. From the distribution charts showing length range with 15 directional angles and five groups(I~V), a systematic variation appears in the mean length with microcrack orientation. The distribution charts are distinguished by the bilaterally symmetrical pattern to nearly N-S direction. The whole domain of the length-cumulative frequency diagram for microcrack populations can be divided into three sections in terms of phases of the distribution of related curves. Especially, the linear middle section of each diagram of five groups represents a power-law distribution. The frequency ratio of linear middle sections of five groups ranges from 46.6% to 67.8%. Meanwhile, the slope of linear middle section of each group shows the order: group V($N60{\sim}90^{\circ}E$, -2.02) > group IV($N20{\sim}60^{\circ}E$, -1.55) > group I($N60{\sim}90^{\circ}W$, -1.48), group II($N10{\sim}60^{\circ}W$, -1.48) > group III($N10^{\circ}W{\sim}N20^{\circ}E$, -1.06). Five sub-populations(five groups) that closely follow the power-law length distribution show a wide range in exponents( -1.06 - -2.02). These differences in exponent among live groups emphasizes the importance of orientation effect. In addition, breaks in slope in the lower parts of the related curves represent the abrupt development of longer lengths, which is reflected in the decrease in the power-law exponent. Especially, such a distribution pattern can be seen from the diagram with $N10{\sim}20^{\circ}E,\;N10{\sim}20^{\circ}W$ and $N60{\sim}70^{\circ}W$ directional angles. These three directional angles correspond with main directions of faults developed around the study area. The distribution chart showing the individual characteristics of the length-cumulative frequency diagrams for 15 directional angles were made. By arraying above diagrams according to the categories of three groups(A, B and C), the differences in length-frequency distributions among these groups can be easily derived. The distribution chart illustrates the importance of analysing microcrack sets separately. From the related chart, the occurrence frequency of shorter microcracks shows the order: group A > group B > group C. These three types of distribution patterns could reveal important information on the processes occurred during microcrack growth.