• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10B
• /
• pp.849-856
• /
• 2004

This paper proposes a novel superframe formation algorithm for wireless systems with time-slotted superframe structure. The design objective of the proposed algorithm is to provide high performance, stability, error tolerance, as well as power-saving features. The paper presents a comprehensive performance analysis of the Proposed superframe formation algorithm with different types of traffic applied. During analysis several performance metrics are investigated. The error tolerance to beacon loss and the behavior of CBR flows are also studied. We show that the proposed algorithm inherits the advantages of the previously used algorithms, while providing additional features.

• Journal of Integrative Natural Science
• /
• v.11 no.1
• /
• pp.44-50
• /
• 2018

In this paper, we propose a context-aware power management (CPM) scheme using beacons to reduce the power consumption of personal computers (PCs). In the proposed CPM scheme, the PC, smartphone, control server, and Internet of Things (IoT) device are necessary. PC users first log in the control server using their smartphones and select PCs to turn on. Then, the selected PCs automatically go into three different modes, i.e., sleep, shutdown, and standby power off modes, in order when the PC users leave the PCs without turning off them. Further, we develop a testbed with the proposed CPM scheme using the Arduino with Bluetooth low energy (BLE) and relay modules. Finally, it is shown that the proposed CPM scheme outperforms the conventional scheme in terms of the power consumption.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.787-790
• /
• 2015

Recently, M2M (Machine to Machine) communication is possible the development of MTC (Machine Type Communication) devices becomes active. MCT devices in the form of home appliances have a low power consumption, low cost, short-range wireless communication in wireless home network. For purpose, MTC devices based on IEEE 802.15.4/Zigbee are composed in the form of cluster-tree topology, which consists of one PAN (Personal Area Network), one or other router and end of nodes. It happens that transmission delay, packet drop, and lacking data resulted from collision originated by a competition for allocating channels among MTC devices that greatly increased. At last performance of entire network can be degradated. This paper proposes that the beacon frame-based grouping algorithm using multiple channels in a MTC devices in the presence of wireless home network interference. The proposed algorithm decreases the transmission delay, dropped packet and throughput is more increase, so the proposal algorithm is more efficient than the IEEE 802.15.4/ Zigbee standard.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.89-94
• /
• 2018

This paper investigated the design method of the smart sensor for implementing IoT (Internet of Things) service. The power supply of sensor consistently acquisting data is based on the energy harvesting technology and designed with piezoelectric transducer not affected by surrounding circumstances. The wireless communication interface for the transmission of data is designed with BLE (Bluetooth Low Energy). BLE is highly adequate wireless communication technology for low power consumption and short distance wireless communication. The main application of BLE is beacon whose usage range is extended from O2O (Online to Offline) service, navigator based on indoor positioning technology, and anti-theft/lost child prevention service to mobile game. This paper studied the method to extend wireless coverage for complementing the short wireless transmission distance of BLE. The wireless sensor network based on CATV network is proposed for the easy construction of BLE sensor network and extended wireless coverage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.475-477
• /
• 2010

In the power saving mechanism specified in IEEE 802.11, all node use the sam ATIM window size. Since the ATIM window size critically affects throughput and energy consumption, a fixed ATIM window does not perform well in all situations. This paper proposes the efficient power management mechanism considering network characteristic in 802.11. To reflect the network characteristic, the paper uses th (m,k)-firm deadline technique. Simulation result shows that proposed mechanism outperforms the IEEE 802.11 power saving mechanism in terms of the amount of power consumed.

• Journal of the Korea Society for Simulation
• /
• v.25 no.2
• /
• pp.21-29
• /
• 2016

Indoor location system has been used Wi-Fi to get a location. After the development of BLE(Bluetooth Low Energy), the interest in the method of a indoor positioning had been move on. It has more advantages than using Wi-Fi. Easy installation, low power consumption, low signal interference and changeable setting(Advertising interval, tx power, etc.). These things can improve efficiency or accuracy in a indoor positioning system. For this reason, recent indoor positioning system uses BLE rather than Wi-Fi. Accordingly, error factors of BLE beacon based indoor positioning should be studying for high accuracy of indoor positioning. In this research, set up few experiment scenarios and keep a close watch on how technological, environmental factor is affecting positioning accuracy. When a application uses largest signal strength to get the indoor location, the mean error of experimental results was decreased compare to using received signal strength in real-time. The result was same when the application applied average and standard deviation to get the indoor location. Changing advertising interval had an effect on the mean error of indoor positioning. Short advertising interval makes the lower mean error than large advertising interval.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.409-414
• /
• 2010

The applications based on geographical location are increasing rapidly in wireless sensor networks (WSN). Recently, various localization algorithms have been proposed but the majority of algorithms rely on the specific hardware to measure the distance from the signal sources. In this paper, we propose the Weighted Multiple Rings Localization(WMRL). We assume that each deployed anchor node may periodically emit the successive beacon signals of the different power level. Then, the beacon signals form the concentric rings depending on their emitted power level, theoretically. The proposed algorithm defines the different weighting factor based on the ratio of each radius of ring. Also, If a sensor node may listen, it can find the innermost ring of the propagated signal for each anchor node. Based on this information, the location of a sensor node is derived by a weighted sum of coordinates of the surrounding anchor nodes. Our proposed algorithm is fully distributed and does not require any additional hardwares and the unreliable distance indications such as RSSI and LQI. Nevertheless, the simulation results show that the WMRL with two rings twice outperforms centroid algorithm. In the case of WMRL with three rings, the accuracy is approximately equal to WCL(Weighted Centroid Localization).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1955-1960
• /
• 2014

Many routing protocols have been proposed for low-power and ad-hoc networks to deliver command or data among nodes and recently, various researches are carried out about networking scheme considering reliability and scalability. In low-power networking technology, the performance of network layer is closely connected with the operation of data link layer and mesh routing mechanisms based on TDMA MAC are considered for reliability and scalability. This paper proposes mesh routing algorithm utilizing the characteristics of TDMA MAC and topological addressing in TDMA based low-power and ad-hoc networks and implementation results are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3542-3566
• /
• 2018

In this paper, we investigate a buffer-aided wireless powered cooperative communication network (WPCCN), in which the source and relay harvest the energy from a dedicated power beacon via wireless energy transfer, then the source transmits the data to the destination through the relay. Both the source and relay are equipped with an energy buffer to store the harvested energy in the energy transfer stage. In addition, the relay is equipped with a data buffer and can temporarily store the received information. Considering the buffer-aided WPCCN, we propose two buffer-aided relaying protocols, which named as the buffer-aided harvest-then-transmit (HtT) protocol and the buffer-aided joint mode selection and power allocation (JMSPA) protocol, respectively. For the buffer-aided HtT protocol, the time-averaged achievable rate is obtained in closed form. For the buffer-aided JMSPA protocol, the optimal adaptive mode selection scheme and power allocation scheme, which jointly maximize the time-averaged throughput of system, are obtained by employing the Lyapunov optimization theory. Furthermore, we drive the theoretical bounds on the time-averaged achievable rate and time-averaged delay, then present the throughput-delay tradeoff achieved by the joint JMSPA protocol. Simulation results validate the throughput performance gain of the proposed buffer-aided relaying protocols and verify the theoretical analysis.

• Journal of the Korean Institute of Navigation
• /
• v.3 no.1
• /
• pp.47-77
• /
• 1979

A microwave Navigational Aid system is suggested suitable for fishing boats too small to be equipped with Radar or Radio-Direction-Finder. The system proposed here is similar to that of Talking-Beacon developed in Japan, but the distinctive modification proposed is that an increase of sixteen times in peak transmitting power, thus an accompanying increase of coverage, is achieved with the same mean transmitting power as that of Japan without sacrificing the clearness of azimuth information, by adopting a pulse repetition modulation instead of pulse width modulation as in Japan system. An experimental land station transmitter of transmitting frequency of 9, 370MHz and of peak power of 35kw with a microwave beam of 1 degree in horizontal width and 7 degrees in vertical width rotating once every three minutes, and also an experimental receiver of 20-dB in sensitivity and of an assumed cost of 100 dollars, operated by a 12 volts battery source are made, and the sail test results are reported showing that a bearing infromation of an accuracy of within two degrees can be obtainable every three minutes at a distance of as far as 24 miles from the transmitter if the transmitter is located as high as 100 meters above sea-level.