• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.251-254
• /
• 2005

Animpedancecalculationmethodfortheirregularshapedpowerdistributionnetworksispresented.Theirregularshapedmetal-dielectric-metalboardissplitintothreepieceofsegmentstocalculatetheimpedancebetweenthetwoseparatedpointsontheboard.Transmission-matrixdescriptioncorrespondingtotheunitcolumnofboardandtheconnectionofunitcolumnboardareintroduced.Thenthetransmission-matrixfortheeachsegmentiscalculatedandreducedtothe2-portsimpedancematrix.Theproposedalgorithmisveryfastcomparingtheexistingmethods.Appliedtothe6inchby5inchsizeirregularshapedboard,theproposedmethodshows15timesfasterthantheelectromagneticorcircuitanalysismethod.

• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.170-178
• /
• 2010

논문에서는 전원부에서 노이즈가 발생되어 신호선에 노이즈가 유기될 때, 유전체의 손실 특성이 노이즈에 미치는 영향에 관해서 연구를 하였다. 이를 분석하기 위해 Full-wave 시뮬레이터인 Ansoft사의 HFSS(High Frequency Structure Simulation)와 CST사의 MWS(MicroWave Studio)의 계산 결과와 측정 결과를 비교하여 신뢰성을 확보하였고, 실제 사용되고 있는 4가지의 상용 기판에 대한 유기되는 노이즈를 해석하였다. 또한, TLM(Transmission Line Method)를 이용해서 전원면의 회로 모델 구성 시 기판의 유전체 손실을 반영할 수 있는 Debye 모델을 적용하여 주파수에 대한 임피던스를 분석할 수 있는 모델을 적용 측정 결과와 3 GHz까지 일치하는 모델을 얻었다.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2008년도 제7회 추계학술대회 및 정기총회
• /
• pp.391-394
• /
• 2008

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.340-343
• /
• 2002

Electromagnetic(EM) radiation problems and their possible solutions are addressed in this paper for the split power plane of high-speed digital systems. Stitching and decoupling capacitors are proved to be very effective fur reducing signal noise, ground bounce as well as electromagnetic radiation from the split power plane. Simulations based on 3D-Finite Difference Time Domain (FDTD) method are utilized for the analysis of practical high frequency multi-layered PC main board

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.75-80
• /
• 2002

Signal integrity problems and their possible solutions are addressed in this paper for split power plane of high-speed digital systems. Stitching and decoupling capacitors are proved to be very effective for reducing signal noise, ground bounce as well as electromagnetic radiation from the split power plane. Simulations based on 3D-Finite Difference Time Domain (FDTD) method are utilized for the analysis of practical high frequency multi-layered PC main board.

• 한국전자파학회논문지
• /
• 제10권7호
• /
• pp.1065-1073
• /
• 1999

본 논문에서는 Haar 웨이블릿 기반 MRTD(MultiRes빼lion Time-Domain)를 이용하여 다층 PCB (Printed C Circuit Board)의 전원 공급면내에서 발생할 수 있는 Ground Bounce 문제를 해석하였다. 기존의 FDTD법을 이용한 모델링에서는 PCB 전원 공급연을 구성하는 $V_{cc}$연과 접지면 사이의 좁은 간격을 표현하기 위해 수직 방향으로 매우 작은 셀이 필요하다. 이에 따라 안정 조건(Stability Con며tion)에 의한 시간간격 $\Deltat$가 매우 작아 일정 시간 동안의 응답을 관찰하기 위해 많은 수의 반복 계산(Iteration)을 수행해야 한다. 이러한 문제 에 대해 MRTD를 적용하여 수직 방향 셀 크기를 두 배로 증가시켜 해석함으로써 계산 시간을 현저하게 감 소시킬 수 있다. 또한 MRTD에 의한 결과는 FDTD법에 의한 결과 및 해석적인 해와 매우 잘 일치한다. 본 논문의 결과는 PCB 상의 EMI/EMC 문제의 해석에 있어 MRTD의 정확성과 효율성을 잘 나타낸다.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.97-102
• /
• 2012

The differential global positioning system (DGPS) transmits a GPS enhancement signal using a top-loaded monopole antenna in the medium frequency range. The top-loaded antenna in the medium frequency band can attain a radiation efficiency on the order of 10%. The antenna ground plane characteristics affect the antenna radiation efficiency. To improve the radiation efficiency, it is necessary to install the antenna on a ground plane with large enough physical dimensions and good conductivity. The antenna radiation efficiency is a primary factor in determining the DGPS service area. The service area of the DGPS using a medium frequency band is dominantly affected by the antenna radiation efficiency. To determine antenna radiation efficiencies accurately, the antenna radiation efficiencies of DGPS are deduced from the propagation power in this paper. Based on the deduced antenna radiation efficiencies, the service area for the Korean nationwide-DGPS is analyzed and evaluated.

• Journal of information and communication convergence engineering
• /
• 제22권1호
• /
• pp.14-22
• /
• 2024

This study presents the design of a Wilkinson power divider for three-way output ports (WPD3OP), which incorporates a defected ground structure (DGS). An asymmetric power divider is integrated into the output ports of the conventional Wilkinson power divider (WPD), establishing a three-way output port configuration. The DGS introduces periodic or irregular patterns into the ground plane to suppress unwanted electromagnetic wave propagation, and its incorporation can enhance the performance of the power divider, in terms of the power-division ratio, isolation, and bandwidth, by reducing spurious resonances. The proposed design algorithm for an asymmetric power divider for three-way output ports is analyzed via circuit simulations using High-Frequency Simulation Software (HFSS). The results verify the validity of the proposed method. The analysis of the WPD3OP integrated with DGS certifies the achievement of a center frequency of 2 GHz. This confirmation is supported by schematic ideal design simulation results and measurements encompassing insertion losses, return losses, and isolation.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.839-843
• /
• 2011

We have established a wind map of Singapore, a city-state characterized its land cover by urban buildings to confirm a possibility of wind farm development. As a simple but useful approximation of urban canopy, a zero-plane displacement concept was employed. The territory is divided into 15 sectors having similar urban building layouts, and zero-plane displacement, equivalent roughness height at each sector was calculated to setup a terrain boundary condition. Annual mean wind speed and mean wind power density map were drawn by a CFD micrositing model, WindSim where Changi International Airport wind data was used as an in-situ measurement. Unfortunately, predicted wind power density does not exceed 80 $W/m^2$ at 50 m above ground level which would not sufficient for wind power generation. However, the established Singapore wind map is expected to be applied for wind environment assessment and urban planning purpose.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1996년도 학술대회
• /
• pp.39-43
• /
• 1996

This paper presents the designing scheme of the duplexer for ground station using rectangular waveguide. The duplexer consists of 2-channel bandpass filters having asymmetrical inductive window and inductive post obstacles, coupled with H-plane Apertured-coupled junction, and operating in the frequency ranges of 14.5∼14.8GHz and 11.7∼12.0 GHz which are the DBS up/downlink for the domestic Ku-band ground station.