• Journal of Applied Biological Chemistry
• /
• v.57 no.1
• /
• pp.73-81
• /
• 2014

The present study was carried out to assess exposure and risk to thiophanate-methyl wettable powder for agricultural worker during mixing/loading and application with power sprayer in green pepper, cucumber and apple fields. Dermal exposure was measured with patches, gloves, socks and masks, while inhalation exposure was evaluated with personal air pump and solid sorbent. Those methods were full validated before experiment. During mixing/loading, dermal exposure amount in green pepper, cucumber and apple fields was $24.0{\pm}6.7$, $4.5{\pm}1.5$ and $18.5{\pm}0.6mg$, corresponding to mean 0.007, 0.001 and 0.005% of prepared active ingredient, respectively. The major exposed part for mixer/loader was hands (78-92%). Dermal exposure amount for applicator in green pepper, cucumber and apple fields was $84.9{\pm}14.0$, $34.0{\pm}20.8$ and $30.7{\pm}9.1mg$, corresponding to mean 0.024, 0.016 and 0.013% of applied active ingredient, respectively. The main body parts of exposure in apple field were hands, while thighs and shins in other fields. Inhalation exposure amount in green pepper, cucumber and apple fields was $1.5{\pm}2.2$, $52.7{\pm}48.9$ and $4.0{\pm}4.9{\mu}g$ during mixing/loading and $0.2{\pm}0.1$, $23.2{\pm}12.4$ and $0.4{\pm}0.6{\mu}g$ for applicator, respectively. These results were suggested that main factors affecting dermal exposure were contact frequency to the plants, foliage density, hygienic behavior, work type, and working environment, while inhalation exposure was affected mainly by working environment, especially wind. In risk assessment, margin of safety for thiophanate-methyl in all cases was over 1. However, during application in green pepper field, margin of safety was close to 1.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.618-628
• /
• 1998

Pure CaO, Mn-doped CaO, Mn/CaO, and K/CaO catalysts were prepared and tested as catalysts for the oxidative coupling of methane in the temperature range of 600 to 800$^{\circ}C$ to investigate the effects of Mn- and K-addition on the catalytic activity of calcium oxide. To characterize the catalysts, X-ray powder diffraction(XRD), XPS, SEM, DSC, and TG analyses were performed. The catalytic reaction was carried out in a single-pass flow reactor using on-line gas chromatography system. Normalized reaction conditions were generally $p(CH_4)/p(O_2)=250$ Torr/50 Torr, total feed flow rate=30 mL/min, and 1 atm of total pressure with He being used as diluent gas. Among the catalysts tested, 6.3 mol% Mn-doped CaO catalyst showed the best $C_2$ yield of 8.0% with a selectivity of 43.2% at 775$^{\circ}C$. The $C_2$ selectivity increased on lightly doped CaO catalysts, while decreased on heavily doped CaO([Mn] > 6.3 mol%) catalysts. 6 wt.% Mn/CaO and 6 wt.% K/CaO catalysts showed the $C_2$ selectivities of 13.2% and 30.9%, respectively, for the reaction. Electrical conductivities of CaO and Mn-doped CaO were measured in the temperature range of 500 to 1000$^{\circ}C$ at Po2's of $10^{-3}\; to\;10^{-1}\;atm.$ The electrical conductivity was decreased with Mn-doping and increased with increasing $P0_2$in the range of $10^{-3}\;to\;10^{-1}\;atm,$ indicating the specimens to be p-type semiconductors. It was suggested that the interstitial oxygen ions formed near the surface can activate methane and the formation of interstitial oxygen ions was discussed on the basis of solid-state chemistry.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.811-817
• /
• 2006

The primary purpose of this study is to estimate the guaranteed strength and construction quality of the combined high flowing concrete which is used in the slurry wall of underground LNG storage tank. The required compressive strength of this type of concrete become generally known as a non economical value because it is applied the high addition factor for variation coefficients and low reduction factor under water concrete. Therefore, after estimation of the construction quality and guaranteed strength in actual site work, this study is to propose a suitable equation to calculate the required compressive strength in order to improve its difference. Application results in actual site work are shown as followings. The optimum nix design proportion is selected that has water-cement ratio 51%, sand-aggregate ratio 48.8%, and replacement ratio 42.6% of lime stone powder by cement weight. Test results of slump flow as construction quality give average 616~634mm. 500mm flowing time and air content are satisfied with specifications in the rage of 6.3 seconds and 4.0% respectively. Results of strength test by standard curing mold show that average compressive strength is 49.9MPa, standard deviation and variation coefficients are low as 1.66MPa and 3.36%. Also test results by cored cylinder show that average compressive strength is 66.4MPa, standard deviation and variation coefficients are low as 3.64MPa and 5.48%. The guaranteed strength ratio between standard curing mold and cored cylinder show 1.23 and 1.32 in the flanks. It is shown that applied addition factor for variation coefficients and reduction factor under water concrete to calculate the required compressive strength is proved very conservative. Therefore, based on these results, it is proposed new equation having variation coefficients 7%, addition factor 1.13 and reduction factor 0.98 under water connote.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.636-642
• /
• 2013

In order to overcome drawbacks (i.e., filtration and recovery) of conventional powder type photocatalysts, nano-ZnO/Laponite/PVA (ZLP) photocatalyzed adsorption balls were developed by using in situ mixing of nanoscale ZnO as a photocatalyst, and Laponite as both adsorbent and supporting media in deionized water, followed by the poly vinyl alcohol polymerization with boric acid. The optimum mixing ratio of nano-ZnO:Laponite:PVA:deionized water was found to be 3:1:1:16 (by weight), and the mesh and film produced by PVA polymerization with boric acid might inhibit both swelling of Laponite and detachment of nanoscale ZnO from ZLP balls. Drying ZLP balls with microwave (600 watt) was found to produce ZLP balls with stable structure in water, and various sizes (55~500 ${\mu}m$) of pore were found to be distributed based on SEM and TEM results. In the initial period of reaction (i. e., 40 min), adsorption through ionic interaction between methylene blue and Laponite was the main removal mechanism. After the saturation of methylene blue to available adsorption sites for Laponite, the photocatalytic degradation of methylene blue occurred. The effective removal of methylene blue was attributed to adsorption and photocatalytic degradation. Based on the results from this study, synthesized ZLP photocatalyzed adsorption balls were expected to remove recalcitrant organic compounds effectively through both adsorption and photocatalytic degradation, and the risks of environmental receptors caused by detachment of nanoscale photocatalysts can be reduced.

• Research in Plant Disease
• /
• v.22 no.3
• /
• pp.145-151
• /
• 2016

Chemical fungicides have reduced Fusarium head blight (FHB) severity. However, by the effects of fungicide residues, they can only be used up to 30 days before time of harvest. Therefore, the development of new biofungicides that are applicable until harvest is required. In order to select plant extracts having antifungal activity against Fusarium graminearum for the control of FHB, we investigated the inhibitory effects of 225 medicinal plant extracts on spore germination of F. graminearum. Of these plant extracts, the methanol extract of Cirsium japonicum (CJ) roots showed the strongest antifungal activity. Through solvent partitioning, repeated column chromatography, and spore germination bioassay, two chemicals were purified and then their chemical structures were identified as ciryneol C (CC) and 1-heptadecene-11,13-diyne-8,9,10-triol (HD-ol) which are polyacetylene substances. Two active compounds effectively inhibited the germination of F. graminearum macroconidia; HD-ol ($IC_{50}$ of $3.17{\mu}g/ml$) showed stronger spore germination inhibitory activity than that of CC ($IC_{50}$ of $28.14{\mu}g/ml$). In addition, the wettable powder type formulation of ethyl acetate extract of CJ roots suppressed the development of FHB in dose-dependent manner, with control values of 78.92% and 31.56% at 250- and 500-fold dilutions, respectively. Combining these findings suggest that the crude extract of CJ roots containing polyacetylene compounds could be used as botanical fungicide for the control of FHB.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.419-426
• /
• 2001

This study was carried out to develope a convenient instant spiced Toha-jeot. Toha-jeot was manufactured by five samples; 8%, 10%, 13% 23% sodium chloride and a conventional type soy sauce. The Toha-jeot was refrigerated at 4$\pm$1$\^{C}$ for 3 months and then boiled glutinous rice, red pepper powder, chopped garlic and ginger were added, and the spiced Toha-jeot was fermented at 4$\pm$1$\^{C}$ for 2 months, was freeze-dried at a condition of 40$\^{C}$, vacuum 100∼200 millitor millitorr and then packed in vacuum. It is called freeze-dried instant spiced Toha-jeot (FIST). Changes in the components and quality of refrigerated spiced Toha-jeot (RST) and FIST were investigated for 30day. The moisture content of RST was 53.79∼58.91%. Among the mineral constituents of RST, Na and Ca were dominantly occupying. Water activity of FIST was 0.28-0.39 while that of RST was 0.87-0.92. TBA value of FIST was lower than that of RST. Acidity, VBN (volatile basic nitrogen) and TBA(thiobarbituric acid) of the FIST and RST increased slightly, whereas pH decreased. The major components of fatty acids in FIST and RST were analysed into a feater amount of linoleic acid (Cl8:2), palmitic acid (Cl6:1), oleic acid (Cl8:1), linolenic acid (Cl8:3), EPA (C2O:5) and stearic acid(Cl8:0). In sensory evaluation, the RST had higher scores in color and taste and the FIST in chewiness and flavor. The qualitative characteristics and sensory evaluation of FIST and RST were similar.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.988-993
• /
• 2008

The characteristics of NO oxidation using sodium chlorite ($NaClO_2$) powder have been investigated by a flow type packed-bed reactor, where the reaction temperature and the space velocity are varied in the range of $20{\sim}230^{\circ}C$ and $0.4-2.2{\times}10^5hr^{-1}$, respectively, and the simulation gas mixtures are composed of NO (0~200 ppm), $NO_2$ (0-200 ppm), $O_2$ (0~15%) and $H_2O$ (0~15%) within $N_2$ balance. It has been found that the oxidation efficiency of NO depends greatly on the reaction temperature, exhibiting the existence of critical reaction temperature at about $170^{\circ}C$ where the oxidation efficiency of NO is maximized and then abruptly decreased with further increase of reaction temperature, resulting in being negligible over $190^{\circ}C$. Such a behavior in the oxidation efficiency has been originated from the phase transition of $NaClO_2$ at about $170^{\circ}C$ to form $NaClO_3$, and NaCl which are chemically inactive toward the oxidation of NO. The chemical reaction of NO with $NaClO_2$ has been observed to produce $NO_2$, ClNO and $ClNO_2$, whereas that of $NO_2$ only OClO species. Additionally, we have also observed that the introduction of $O_2$ and $H_2O$ has little influence on the oxidation of NO.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.128-137
• /
• 2011

Purpose: Resonance frequency analysis, Periotest, and removal torque (RT) test were known as the methods to assess implant stability. The results of these methods are affected by the bone condition, implant diameter and shape. The purpose of this study is to access the meaning and the correlationship of the resonance frequency analysis, Periotest and RT test in osseointegration simulated acrylic resin when the engaged bone thickness and peri-implant bone defect are changed. Materials and methods: To simulate osseointegration, the fixture was fixed to an aluminum mold with a screw. Acrylic resin powder and liquid were poured into the mold for polymerization. The engaged resin thickness with implant was controlled. Simulated cortical bone thicknesses were 1, 3, 5 and 10 mm. Additional 1, 3 and 5 mm peri-implant bone defects were simulated. Three types of implants were used; 4 mm diameter implants of straight shape, 4 mm diameter implants of tapered shape and 5 mm diameter implants of tapered shape. Five fixtures per each type were tested in respective bone condition. Resonance frequency analysis and Periotest were evaluated in all bone conditions. Peak removal torque was measured at simulated cortical bone thicknesses of 1 and 3 mm. The statistical analysis was performed with the Kruskal-Wallis test, Mann-Whitney U test, and Spearman test using a 95% level of confidence. Results: With increasing engaged bone depth, the Implant Stability Quotient (ISQ) values increased and the Periotest values (PTVs) decreased (P<.001, P<.001). With increasing peri-implant bone defect, ISQ values decreased and PTVs increased (P<.001). When the diameter of implant increased, ISQ values increased and Periotest values (PTV) decreased (P<.001). There was a strong correlation between ISQ values and PTVs (r = -0.99, P<.001). Furthermore, the peak removal torque values had weak correlations with both ISQ values and PTVs (r = 0.52, P<.001 ; r = -0.52, P<.001). Conclusion: This study confirmed favorable implant stability with increasing engaged bone depth and implant diameter and decreasing peri-implant bone defect. ISQ values and PTVs showed strong correlation with each other and not with the peak removal torque values.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.4
• /
• pp.225-230
• /
• 2008

Diabetes mellitus is the fifth leading cause of death among Koreans. Control of hyperglycemia and dyslipidemia is strongly correlated with decrease in risks for cardiovascular diseases, the most common and fatal diabetic complication. The effects of chronic feeding of a mixture of Chinese herbs on blood lipid profile were measured in an animal model of type 2 diabetes mellitus, db/db mice (C57BL/Ks). The Chinese herb mixture was composed of Panax ginseng C. A. Meyer,Astragalus membranaceus, Glycyrrhiza uralensis, Lycium chinense, Morus, Pueraria thunbergiana, Prunella vulgaris var. lilacina, Acanthopanax sessiliflorus, Schizandra chinensis, Scutellaria baicalensis, Dioscorea batatas, Polygonatum doratumvar. pluriflorum, Paeonia lactiflora, and Rehmannia glutinosa in a ratio of 1 : 0.7 : 0.4 : 0.7 :0.4 : 0.7 : 1.1 : 0.9 : 0.4 : 0.4 : 0.7 :0.7 : 0.9 : 0.9. Methanol extract of the Chinese herb mixture was tested for the inhibitory activity against yeast ${\alpha}$-glucosidase in vitro. The Chinese herb mixture extract inhibited ${\alpha}$-glucosidase by 25.2% at the concentration of 0.5mg/mL. Four weekold male db/db mice (n = 14) were fed AIN-93G semipurified diet or diet containing 10% powder of the Chinese herb mixture for 6 weeks after 1 week of adaptation period. Body weight (39.5 ${\pm}$ 1.6 g) and food intake (4.3 ${\pm}$ 0.6 g/day) of the Chinese herb group were not significantly different from those of the control group (40.4 ${\pm}$ 2.6 g and 4.5 ${\pm}$ 0.6 g/day). Consumption of Chinese herb mixture significantly decreased plasma glucose level (442.5 ${\pm}$ 36.0mg/dL) compared with the control group (489.8 ${\pm}$ 34.6 mg/dL, p < 0.05). Plasma cholesterol level (159.2 ${\pm}$ 18.4 mg/dL) of the Chinese herb group was significantly lower than that of the control group (185.4 ${\pm}$ 13.7 mg/dL, p < 0.05). Blood glycated hemoglobin (6.3 ${\pm}$ 0.8%) and plasma triglyceride levels (99.4 ${\pm}$ 15.0mg/dL) of the Chinese herb group were not significantly different from those of the control group (6.7 ${\pm}$ 0.7% and 108.8 ${\pm}$ 11.0mg/dL). Thus, the Chinese herb mixture could be useful in the treatment of diabetes and cardiovascular complications of diabetes.

• The Korean Journal of Pesticide Science
• /
• v.15 no.1
• /
• pp.36-47
• /
• 2011

This study was performed to investigate the contaminated status of endocrine disruptor-suspected pesticides in agricultural products distributed in northern Seoul in 20l0. We analyzed 33 kinds of pesticides by multiresidue analysis method in 3,081 samples. Twelve pesticidcs were detected 600 times and violated 22 times from the agricultural products. The highest frequency of detection was procymidone and that of violation was endosulfan. The highest rates of detection divided violation times as diazinon. In agricultural products, 466 samples had pesticide residues and 22 samples violated the maximum residue limits (MRLs). Agricultural products were also classified by type and red pepper powder belonged to the others was the highest detection rate at 70.7%, fruiting vegetables 35.3%, tea leaves 23.6%, stalk and stem vegetables 21.2%, fruits 14.6% and leafy vegetables 11.2%. The rates of violation sample were stalk and stem vegetables 1.1%, leafy vegetables 1.0% and roots and tubers 0.4%. Leek was to be managed primarily because it had the high detection and violation ratio and was detected together several pesticides.