• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.224-234
• /
• 2019

토목구조물의 교면은 토목구조물 상부에 방수층이 존재하고 방수층 상부에 아스콘이나 콘크리트로 포장층을 마무리하여 교면의 시공을 완성하고 있다. 그러나 아스팔트계열은 뛰어난 감온성으로 고온에서 용융되는 취약한 특성을 지녔고, 이는 아스콘 포설시 고온으로 인하여 방수재가 용융되어 두께저하로 인한 하자 발생률이 증가하게 된다. 본 연구에서는 교면에 적용되는 MMA(Methyl Methacrylate)의 경질 Type과 연질 Type에 대하여 동시 사용시 배합에 따른 경화상태를 확인하고 각각의 인장강도와 신장률이 관련 품질기준에 대한 성능 만족 여부와 적정 배합비율을 확인해 보고자 한다. 그 결과 MMA 경질 수지 또는 연질 수지를 단독으로 사용하게 될 경우 경질 수지는 인장특성을 연질 수지는 신장특성이 명확하게 나타나기 때문에 수지의 단독 사용으로는 KS F 4932의 인장성능 품질기준을 만족시키지 못하는 것으로 나타났고, 파우더 양이 총 배합량 중 56.25%를 초과하게 될 경우에는 경화 후 표면에 공극이 발생되고 셀프 레벨링이 불가능하여 불균질한 표면을 형성하는 것으로 확인되었다. 또한, 경질 수지: 연질 수지: 파우더 비율을 15g: 85g: 150g으로 설정한 시험편은 인장강도 $1.5N/mm^2$, 신장률 133%가 나타남에 따라 KS F 4932의 인장성능을 만족하는 것으로 확인되었다.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.17-21
• /
• 2019

In this study, selective laser sintered 3D printing mold core and metal core were used to investigate the difference of the thickness shrinkage from the gate of the injection molded part at a constant interval. SLS 3D printing mold core was made of nylon-based PA2200 powder and the metal core was manufactured by conventional machining method. As the PA2200 powder material has low strength, thermal conductivity and high specific heat characteristics compared with metal, molding conditions were set with the consideration of molten temperature and injection pressure. Crystalline resin(PP) and amorphous resin(PS) with low melting temperature and viscosity were selected for the injection molding experiment. Cooling time for processing condition was selected by checking the temperature change of the cores with a cavity temperature sensor. The cooling time of the 3D printing core was required a longer time than that of the metal core. The thickness shrinkage of the molded part compared to the core depth was measured from the gate by a constant interval. It was shown that the thickness shrinkage of the 3D printing core was 2.02 ~ 4.34% larger than that of metal core. In additions, in the case of metal core, thickness shrinkage was increased with distance from the gate, on the contrary, in the case of polymer core showed reversed aspect.

• 동의생리병리학회지
• /
• 제16권5호
• /
• pp.914-920
• /
• 2002

This experiment is carried out for test whether the addition temperament drugs of Danchisoyo-san have an anti-inflammatory effect and have suppression effect on immunocyte in the state of inflammation which induced by carageenan and zymosan. The freezing lyophilization powder which were extracted from Danchisoyo-san divided low dose group(200mg/kg-DSL) and high dose group(500mg/kg-DSH) and after melting in water, it was orally administered to the mouse. Compared with inflammation induced group which were induced by triggering-inflammation reagent carageenan and zymosan and normal contrast group, we measured the edema decrement effect, macrophage and spleen cell activation. 1. Danchisoyo-san has suppress inflammatory reaction induced by carrageenan. 2. Danchisoyo-san has suppress increasing activation of abdominal cavity macrophage cell in the carrageenan induced inflammation. 3. Danchisoyo-san has suppress increasing activation of spleen cell in the carrageenan induced inflammation. 4. Danchisoyo-san has suppress increasing activation of abdominal cavity macrophage in the zymosan induced inflammation. 5. Danchisoyo-san has suppress increasing activation of spleen cell in the zymosan induced inflammation. Based on the above result, Danchisoyo-san was improved its suppression effect to the inflammatory reaction through the suppression of spleen cell and macrophage activation. So we concluded that Danchisoyo-san is prospected as a anti-inflammatory agent to cure inflammation.

• 청정기술
• /
• 제19권2호
• /
• pp.75-83
• /
• 2013

본 총설에서는 이원계 티타늄 합금 스크랩을 재활용하기 위해 수소 플라즈마 아크 용해를 이용하여 잉곳을 제조하고, 수소화-탈수소화법과 고상탈산 공정을 통해 저산소 합금 분말을 제조하는 기술에 대하여 소개하고자 한다. 이에 더해, 이원계 티타늄 합금 스크랩을 이용하여 고용상 서메트용 탄화물 분말을 제조하는 응용 분야에 대해서도 소개하고자 한다. 이원계 티타늄 합금 스크랩은 수소 플라즈마 아크 용해를 통해 건전한 잉곳의 제조가 가능함을 확인하였고, 최종적으로 제조된 티타늄 합금 분말의 산소함량은 1,000 ppm 이하였으며, 이를 고용상 서메트용 탄화물 분말의 제조에 응용이 가능함을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제9권2호
• /
• pp.19-25
• /
• 2002

저온소결기판을 위하여 green sheet를 제조하기 위한 조성으로 $Li_2$O.MgO. $MgF_2$.$SiO_2$.$B_2O_3$를 기초 조성으로 선정하였다. 조합 후 용융하여 만들어진 모유리는 열분석을 통하여 최적 핵형성 온도와 최고 결정성장 온도를 도출하였으며 핵형성 온도는 전이온도와 같은 $490^{\circ}C$로 선정하였다. 결정화 유리를 제조하기 위하여 두 단계의 열처리를 실시하였으며 , 생성된 결정상은 Lithium fluorhectorite와 Lithium boron fluorphlogopite결정상 이었다. 계속적으로 제조된 결정화 유리는 water swelling 현상을 이용하여 분말화를 실시하였으며 평균 입도크기는 2.574 $\mu\textrm{m}$이었다. glass ceramics 분말은 물에 넣으면 반응하여 팽창하는 것과 함께 끈적끈적한 sol이 생성되는 현상을 이용하여 green sheet 제조를 위한 slurry를 제조하였다. Tape casting을 위한 slurry의 결정화 유리 분말 대비 용매의 최적 비율은 100:18이었고, 슬러리의 점도는 11,000~14,000cps 이었다. KCl 1 M용액 10min담지 시편에 대해서는 $900^{\circ}C$에서, 20 min담지 시편에 대해서는 $800^{\circ}C$에서 각각 치밀한 소결성을 나타내었다.

• 한국재료학회지
• /
• 제20권6호
• /
• pp.326-330
• /
• 2010

$CoSb_3$ Skutterudites materials have high potential for thermoelectric application at mid-temperature range because of their superior thermoelectric properties via control of charge carrier density and substitution of foreign atoms. Improvement of thermoelectric properties is expected for the ternary solid solution developed by substitution of foreign atoms having different valances into the $CoSb_3$ matrix. In this study, ternary solid solutions with a stoichiometry of $Co_{1-x}Ni_xSb_3$ x = 0.01, 0.05, 0.1, 0.2, $CoSb_{3-y}Te_y$, y = 0.1, 0.2, 0.3 were prepared by the Spark Plasma Sintering (SPS) system. Before the SPS synthesis, the ingots were synthesized by vacuum induction melting and followed by annealing. For phase analysis X-ray powder diffraction patterns were checked. All the samples were confirmed as single phase; however, with samples that were more doped than the solubility limit some secondary phases were detected. All the samples doped with Ni and Te atoms showed a negative Seebeck coefficient and their electrical conductivities increased with the doping amount up to the solubility limit. For the samples prepared by SPS the maximum value for dimensionless figure of merit reached 0.26, 0.42 for $Co_{0.9}Ni_{0.1}Sb_3$, $CoSb_{2.8}Te_{0.2}$ at 690 K, respectively. These results show that the SPS method is effective in this system and Ni/Te dopants are also effective for increasing thermoelectric properties of this system.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.907-914
• /
• 2004

[ $Si-NaCl-NH_4Cl-NaN_3$ ]계에서 자전연소에 의한 Si의 질화반응기구에 대하여 알아보았다. 희석제로서 첨가된 NaCl은 질화반응 초기에 Si의 용융에 따른 Si의 성장을 억제하여 완전한 질화반응에 도움을 주는 것으로 나타났다. 또한 $NH_{4}Cl$과 $NaN_3$는 반응과정 동안 서로 분해하고 결합하여 생성물로서 NaCl을 형성하였고, 이 과정에서의 발열반응은 시편을 예열함으로써 질화반응에 도움을 주었다. 본 반응계에서 주된 질화반응기구는 액상-기상 반응기구였다. 그리고 ${\alpha}-Si_{3}N_4$의 제조를 위한 최적의 펠렛 기공도는 $67-69%\$였다.

• 한국축산식품학회지
• /
• 제35권2호
• /
• pp.156-163
• /
• 2015

The effects of low molecular-weight collagen peptides derived from porcine skin were investigated on the physicochemical and sensorial properties of chocolate ice cream. Collagen peptides less than 1 kDa in weight were obtained by sub-critical water hydrolysis at a temperature of $300^{\circ}C$ and a pressure of 80 bar. Ice cream was then prepared with gelatin powder and porcine skin hydrolysate (PSH) stabilizers mixed at seven different ratios (for a total of 0.5 wt%). There was no significant difference in color between the resulting ice cream mixtures. The increase in apparent viscosity and shear thinning of the ice cream was more moderate with PSH added than with gelatin. Moreover, the samples containing more than 0.2 wt% PSH had enhanced melting resistance, while the mixture with 0.2 wt% PSH had the lowest storage modulus at $-20^{\circ}C$ and the second highest loss modulus at 10℃, indicating that this combination of hydrocolloids leads to relatively softer and creamier chocolate ice cream. Among the seven types of ice creams tested, the mixture with 0.2 wt% PSH and 0.3 wt% gelatin had the best physicochemical properties. However, in sensory evaluations, the samples containing PSH had lower chocolate flavor scores and higher off-flavor scores than the sample prepared with just 0.5 wt% gelatin due to the strong off-flavor of PSH.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.489-493
• /
• 2012

Green phosphors $K_2BaW_2O_8:Tb^{3+}$(1.0 mol%) were synthesized by solid state reaction method. Differential thermal analysis was applied to trace the reaction processes. Three endothermic values of 95, 706, and $1055^{\circ}C$ correspond to the loss of absorbed water, the release of carbon dioxide, and the beginning of the melting point, respectively. The phase purity of the powders was examined using powder X-ray diffraction(XRD). Two strong excitation bands in the wavelength region of 200-310 nm were found to be due to the ${WO_4}^{2-}$ exciton transition and the 4f-5d transition of $Tb^{3+}$ in $K_2BaW_2O_8$. The excitation spectrum presents several lines in the range of 310-380 nm; these are assigned to the 4f-4f transitions of the $Tb^{3+}$ ion. The strong emission line at around 550 nm, due to the $^5D_4{\rightarrow}^7F_5$ transition, is observed together with weak lines of the $^5D_4{\rightarrow}^7F_J$(J = 3, 4, and 6) transitions. A broad emission band peaking at 530 nm is observed at 10 K, while it disappears at room temperature. The decay times of $Tb^{3+}$ $^5D_4{\rightarrow}^7F_5$ emission are estimated to be 4.8 and 1.4 ms, respectively, at 10 and 295 K; those of the ${WO_4}^{2-}$ exciton emissions are 22 and 0.92 ${\mu}s$ at 10 and 200 K, respectively.

• Journal of Pharmaceutical Investigation
• /
• 제27권1호
• /
• pp.39-49
• /
• 1997

Nicotinic acid was mixed with glass powders such as controlled pore glass (CPG), glyceryl controlled pore glass (GPG) and glass beads (GB) at room temperature. The physicochemical properties of nicotinic acid in the various mixtures were examined by differential thermal analysis, X-ray diffraction study. Infrared spectroscopy and BET gas adsorption measurements. The peak area at the melting point from the various mixtures of nicotinic acid and CPG was increased with an increase of nicotinic acid concentration while the broad peak area was remained unchanged in the DTA curve. As shown in the powder X-ray diffraction patterns, the crystalline peaks of nicotinic acid disappeared in mixture with CPG, suggesting the interaction of nicotinic acid and porous powders. It was found that the larger the content of CPG, the higher the ratio of an amorphous state to a crystalline state. BET isotherm showed that as the amount of nicotinic acid was increased, the specific surface area was reduced proportionally to nicotinic acid content of up to 40% and remained constant thereafter. Sublimation of nicotinic acid from the mixture of nicotinic acid and CPG was examined. A large quantity of nicotinic acid was retained in the mixture when stored on various temperatures in vacuo for 10 hours. The nicotinic acid mixtures with CPG or GPG showed a high dissolution rates of nicotinic acid in aqueous solution, especially in the initial dissolution stage. CPG is expected to be a good pharmaceutical excipient to reduce the crystallinity of drugs and to prevent sublimation of drugs.