A Study on The Thickness Shrinkage of Injection Molded Parts with The Variation of Injection Mold Core and Molding Materials |
Shin, Sung-Hyun
(Molds and Dies Technology Group, Korea Institute of Industrial Technology)
Jeong, Eui-Chul (Molds and Dies Technology Group, Korea Institute of Industrial Technology) Kim, Mi-Ae (Molds and Dies Technology Group, Korea Institute of Industrial Technology) Chae, Bo-Hye (Molds and Dies Technology Group, Korea Institute of Industrial Technology) Son, Jung-Eon (Molds and Dies Technology Group, Korea Institute of Industrial Technology) Kim, Sang-Yoon (Molds and Dies Technology Group, Korea Institute of Industrial Technology) Yoon, Kyung-Hwan (Dankook University) Lee, Sung-Hee (Molds and Dies Technology Group, Korea Institute of Industrial Technology) |
1 | R. Malloy, "Plastic Part Design for Injection Molding", Hanser Publications, Second edition, 2010. |
2 | L. L. Zonder, S. Nadav, "Precision Prototyping: The Role of 3D Printed Molds in the Injection Molding Industry", White Paper by Stratasys Inc, 2013. |
3 | R. A. Harris, N. Hopkinson, P. M. Dickens, R. Hague, "The selection of mould design variables in direct stereolithography injection mould tooling", Journal of Engineering Manufacture IMechE Proceeding part B, Vol. 216, pp. 499-505, 2002. DOI |
4 | J. G. Kovacs, G. Kortelyesi, N.K. Kovacs, A Suplicz, "Evaluation of measured and calculated thermal parameters of a photopolymer", Int. Commun. Heat Mass Trans, Vol. 38, pp. 863-867, 2011. DOI |
5 | H. Hassan, N. Regnier, C. Pujos, E. Arquis, G. Defaye, "Modeling the effect of cooling system on the shrinkage and temperature of the polymer by injection molding", Applied Thermal Engineering, Vol. 30, pp. 1547-1557, 2010. DOI |
6 | F. Marin, J. R. Miranda, A. F. Souza, "Study of the design of cooling channels for polymers injection molds", Polymer Engineering and Science, Vol. 58, pp. 552-559, 2017. |
7 | H. Hassan, N. Regnier, C. Le Bot, C. Pujos, G. Defaye, "3D study of cooling system effect on the heat transfer during polymer injection molding", Int. J. Therm, Vol. 49, pp. 161-169, 2010. DOI |
8 | H. Hassan, N. Regnier, C. Lebot, C. Pujos, G. Defaye, "Effect of cooling system on the polymer temperature and solidification during injection molding", Applied Thermal Engineering, Vol. 29, pp. 1786-1791, 2009. DOI |
9 | Y. Liu, M. Gehde, "Evaluation of heat transfer coefficient between polymer and cavity wall for improving cooling and crystallinity results in injection molding simulation", App. Therm, Vol. 80, pp. 238-246, 2015. DOI |
10 | G. A. Mendible, J. A. Rulander, S. P. Johnston, "Comparative study of rapid and conventional tooling for plastics injection molding", Rapid Prototyping Journal, Vol. 23, pp. 344-352, 2017. DOI |