• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.236-240
• /
• 2007

In order to control the microstructure of amorphous/crystalline composites, gas atomized $Cu_{54}Ni_{6}Zr_{22}Ti_{18}$ metallic glass powders wrapped in a crystalline brass were extruded repeatedly. The size of microstructure in the resultant composites was varied depending on the pass of extrusion as well as on the area reduction ratio. The microstructure could be estimated using an equation of $r_n=r_{n-1}/R^{1/2}$, where R is reduction ratio and $r_n$ is the resultant radius of the extruded bar after n pass. Theory of microstructural refinement as well as the relationship between the resultant microstructures and mechanical properties was discussed.

• Preventive Nutrition and Food Science
• /
• 제17권3호
• /
• pp.203-209
• /
• 2012

The effects of variable moisture content, screw speed and barrel temperature on the physicochemical properties of red ginseng powder extrudates were investigated. The raw red ginseng powders were processed in a co-rotating intermeshing twin-screw extruder. Primary extrusion variables were feed moisture content (20 and 30%), screw speed (200 and 250 rpm) and barrel temperature (115 and $130^{\circ}C$). Extruded red ginseng showed higher crude saponin contents (6.72~7.18%) than raw red ginseng (5.50%). Tested extrusion conditions did not significantly affect the crude saponin content of extrudates. Increased feed moisture content resulted in increased bulk density, specific length, water absorption index (WAI), breaking strength, elastic modulus and crude protein content and decreased water solubility index (WSI) and expansion (p<0.05). Increased barrel temperature resulted in increased total sugar content, but decreased reducing sugar content in the extrudate (p<0.05). Furthermore, increased barrel temperature resulted in increased amino acid content and specific length and decreased expansion and bulk density of extrudates only at a higher feed moisture content. The physicochemical properties of extrudates were mainly dependent on the feed moisture content and barrel temperature, whereas the screw speed showed a lesser effect. These results will be used to help define optimized process conditions for controlling and predicting qualities and characteristics of extruded red ginseng.

• Elastomers and Composites
• /
• 제53권4호
• /
• pp.234-238
• /
• 2018

The influence of reinforcing UHMWPE powder on the tribological and mechanical properties of HDPE was investigated. The circularizing of UHMWPE powder was improved by high-speed rotation to enhance particle distribution and flowability. HDPE composites reinforced with UHMWPE powder in the range of 0-50 wt% were prepared by co-rotating twin screw extrusion. The abrasion resistance, plane friction coefficient, tensile strengths, and impact strengths of the composites were investigated as a function of the UHMWPE content. An increasing UHMWPE content decreased the plane friction coefficient and increased the abrasion resistance and impact strength. It is expected that HDPE composites reinforced with spherical UHMWPE powder particles can be used to improve the durability of products such as pipes in the future.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.235-235
• /
• 2009

• 열처리공학회지
• /
• 제31권3호
• /
• pp.126-134
• /
• 2018

In this research, we produced polycrystalline n-type $Bi_2Te_{2.7}Se_{0.3}$ powder using water atomization. To obtain full benefit through water atomized powder, we have implemented spark plasma sintering and hot extrusion for powder compaction. The microstructure and thermoelectric properties were investigated and compared. The average grain size of SPS and extruded bulks were 3.08 and $3.86{\mu}m$ respectively. The extruded material microstructure contains layered grains with less grain boundaries and its counter-part SPS displays dense packed grains with high grain boundaries. Among both bulks, extrusion sample exhibited high power factor (PF) of $2.96{\times}10^{-3}Wm^{-1}K^{-2}$ which is 38% higher than SPS ($2.14{\times}10^{-3}$) bulk sample. Due to variations in grain size and grain boundaries, the SPS bulk shows low thermal conductivity than extruded bulk. However, the extruded bulk sample exhibited a peak ZT of 0.69 at 400 K, which is 19% higher than SPS bulk sample, due to its higher power factor.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.495-496
• /
• 2006

The kneading process and formulations of feedstock obviously affect the quality of MIM products. In the present work, the rheological behaviour of the composite MIM feedstock, metal matrix (Cu) with few additions of ceramic powders $(Al_2O_3)$, was measured by a self-designed/manufactured simple capillary rheometer. Experimental results show that the distribution between powders and binder is more uniformly when blending time increased. Though high powder loading will increase the feedstock viscosity, the fluidity reveals relatively stable through the load curves of extrusion. Besides, the temperature-dependence of viscosity of the feedstock approximately follows an Arrehnius equation. Basing on Taguchi's method, the kneading optimization conditions and the rheological model of the feedstock were established, respectively.

• 한국약용작물학회지
• /
• 제26권5호
• /
• pp.417-429
• /
• 2018

Background: The objective of this study was to make colloidal dispersions of the active compounds of radix of Angelica gigas Nakai that could be charaterized as nano-composites using hot melt extrusion (HME). Food grade hydrophilic polymer matrices were used to disperse these compound in aqueous media. Methods and Results: Extrudate solid formulations (ESFs) mediated by various HPMCs (hydroxypropyl methylcelluloses) and Na-Alg polymers made from ultrafine powder of the radix of Angelica gigas Nakai were developed through a physical crosslink method (HME) using an ionization agent (treatment with acetic acid) and different food grade polymers [HPMCs, such as HP55, CN40H, AN6 and sodium alignate (Na-Alg)]. X-ray powder diffraction (XRD) analysis confirmed the amorphization of crystal compounds in the HP55-mediated extrudate solid formulation (HP55-ESF). Differential scanning calorimetry (DSC) analysis indicated a lower enthalpy (${\Delta}H=10.62J/g$) of glass transition temperature (Tg) in the HP55-ESF than in the other formulations. Infrared fourier transform spectroscopy (FT-IR) revealed that new functional groups were produced in the HP55-ESF. The content of phenolic compounds, flavonoid (including decursin and decursinol angelate) content, and antioxidant activity increased by 5, 10, and 2 times in the HP55-ESF, respectively. The production of water soluble (61.5%) nano-sized (323 nm) particles was achieved in the HP55-ESF. Conclusions: Nano-composites were developed herein utilizing melt-extruded solid dispersion technology, including food grade polymer enhanced nano dispersion (< 500 nm) of active compounds from the radix of Angelica gigas Nakai with enhanced solubility and bioavailability. These nano-composites of the radix of Angelica gigas Nakai can be developed and marketed as products with high therapeutic performance.

• 한국식품영양과학회지
• /
• 제44권8호
• /
• pp.1212-1218
• /
• 2015

본 연구는 저온 및 재래식 압출성형 공정에 따른 쌀 야채류 압출성형의 항산화 활성에 대해 분석하였다. 압출성형 조건은 수분 함량 25%, 스크루 회전속도 150 rpm으로 고정하였다. 저온 압출성형 조건은 사출구 온도 $80^{\circ}C$, $CO_2$ 주입량 300 mL/min, 재래식 압출성형은 사출구 온도 $140^{\circ}C$, $CO_2$ 0 mL/min으로 조절하였다. 원료는 쌀 분말에 단호박, 토마토, 딸기 및 녹차 분말을 각각 10%씩 혼합하여 사용하였다. 단호박 및 토마토 첨가한 압출성형물의 DPPH 라디칼 소거능은 저온 압출성형 공정보다 재래식 압출성형 공정에서 더 높았다. 단호박, 토마토 및 딸기를 첨가한 압출성형물은 압출성형 후 총 페놀 함량이 증가하였으며, 저온 압출성형물보다 재래식 압출성형물에서 총 페놀 함량이 다소 높았다. 총 플라보노이드 함량은 녹차를 첨가한 재래식 압출성형물이 18.82 mg/g으로 가장 높았다. 압출성형 후 단호박을 첨가한 압출성형물의 총 카로티노이드 함량은 낮아졌으나 토마토 압출성형물은 증가하였다. 토마토 압출성형물의 라이코펜 함량은 압출성형 후 증가하였으며, 재래식 압출성형에서 더 높았다. 딸기 압출성형물의 안토시아닌 함량은 저온 압출성형보다 재래식 압출성형 공정에서 높았다. 압출성형 후 녹차 압출성형물의 총 클로로필 함량은 감소하였으며 클로로필 a, b 및 총 클로로필은 저온 및 재래식 공정에 따른 유의적인 차이는 없었다.

• 한국분말재료학회지
• /
• 제29권1호
• /
• pp.28-33
• /
• 2022

Aluminum-based powders have attracted attention as key materials for 3D printing owing to their low density, high specific strength, high corrosion resistance, and formability. This study describes the effects of TiC addition on the microstructure of the A6013 alloy. The alloy powder was successfully prepared by gas atomization and further densified using an extrusion process. We have carried out energy dispersive X-ray spectrometry (EDS) and electron backscatter diffraction (EBSD) using scanning electron microscopy (SEM) in order to investigate the effect of TiC addition on the microstructure and texture evolution of the A6013 alloy. The atomized A6013-xTiC alloy powder is fine and spherical, with an initial powder size distribution of approximately 73 ㎛ which decreases to 12.5, 13.9, 10.8, and 10.0 ㎛ with increments in the amount of TiC.

• Elastomers and Composites
• /
• 제42권2호
• /
• pp.86-92
• /
• 2007

이축 연신에 의한 폴리테트라플루오르에틸렌(PTFE) 막을 제조하기 위한 공정 조건을 확립하기 위하여 상용화되는 PTFE 막 및 PTFE 미세 분말을 선택하였다. 막 제조공정에 사용 되기 위해 PTFE 미세 분말은 전처리 되었고, 첨가제와 혼합되었으며, 혼합물의 숙성, 페이스트 압출 공정, 칼렌더 가공 공정 등이 수행되었고 막의 두께 및 기공크기와 다공성을 측정하였다. 기계적 물성을 강화하기 위하여 시료의 후처리가 실시되었고, PTFE 막 제조공정을 위한 페이스트 압출 공정에서의 PTFE 분말과 첨가제의 혼합비, 숙성 시간, 숙성 온도, 압력 등에 관한 공정 조건이 확립되었고, 기공크기(pore size)와 다공성(porosity)을 조절할 수 있는 이축연신 공정에 대한 최적공정 조건도 확립하였다.