• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2396-2401
• /
• 2009

본 연구는 건축자재로 널리 사용되는 PVC 바닥상재의 표면을 스크래치로부터 보호하기 위하여 기존에 사용하는 광경화형 우레탄-아크릴 수지에 내마모성을 향상시킨 광경화형 하드 코팅액 개발에 관한 것이다. PVC 바닥상재용으로 사용되는 내마모성이 없는 우레탄-아크릴 수지에 $Al_2O_3$(Al-160SG-3), $Al(OH)_3$(SH-8W) 및 $SiO_2$(KS-5000) 등 서로 다른 내마모성을 지닌 물질을 분말 형태로 수지의 양 대비 함량(wt%)을 $10{\sim}30%$로 변화하여 첨가한 후 링밀(Ring Mill)을 사용, 배합하여 수지의 내마모성을 향상시킨 하드 코팅액을 제조하였다. 제조한 하드 코팅액은 코팅층의 두께조절이 가능한 코팅(Bar-coating)을 사용하여 PVC 바닥상재에 코팅 한 후 내마모성, 연필경도, 부착력, 코팅두께 등의 코팅층 표면물성을 평가하였다. 연구결과, 수지에 $Al_2O_3$ 분말 30%를 혼합하여 제조한 하드 코팅액이 내마모성 1등급, 연필경도 H, 부착력 100%로 가장 좋은 물성을 보였으며, 전반적으로 입자크기가 작고, 분말 함량이 많을수록 또한 코팅두께가 두꺼워 질수록 경도 및 내마모성이 우수한 것으로 나타났다.

• 공업화학
• /
• 제18권3호
• /
• pp.273-278
• /
• 2007

본 논문은 배연가스로부터 이산화탄소를 흡착 회수하기 위한 허니컴 흡착소자 및 공정에 관한 것이다. 세라믹섬유와 Na-X를 주원료로 제올라이트 종이를 제조하였다. 제올라이트 종이의 이산화탄소 흡착능을 향상시키기 위해서 $Li^+$, $Ca^{2+}$, $K^+$ 이온교환 및 추가적인 표면코팅을 실시하여 그 특성을 분석하였다. $Li^+$ 이온교환 방법은 이산화탄소 흡착능을 가장 많이 증가시켰지만 공정적용이 가능할 만큼의 흡착능 변화를 보이지 않았다. 반면 Na-X의 추가적인 표면코팅은 이산화탄소 흡착능을 증가시키는 효율적인 방법이었다. 제올라이트 종이를 성형하여 만든 허니컴형 흡착소자에 대한 이산화탄소 흡착파과 특성을 분석하였으며, 이의 결과로서 회전식 이산화탄소 흡착 농축공정의 적용 예를 보여주었다.

• Journal of Periodontal and Implant Science
• /
• 제43권6호
• /
• pp.269-275
• /
• 2013

Purpose: In this study, the effect of calcium sodium phosphosilicate (NovaMin) desensitizing agent, which is a powder-based system, and hydroxyethyl methacrylate and glutaraldehyde (Gluma desensitizer), which is liquid-based system, on dentinal tubule occlusion was analyzed by scanning electron microscope. The effects of the above two along with one control group were compared to determine the more effective method of sealing the dentinal tubules after initial application. Methods: Twenty specimens were allocated to each of 3 groups: Control, Gluma desensitizer, and NovaMin. Two additional samples were also prepared and treated with Gluma and NovaMin; these samples were longitudinally fractured. The specimens were prepared from extracted sound human premolars and were stored in 10% formalin at room temperature. The teeth were cleaned of gross debris and then sectioned to provide one to two dentin specimens. The dentin specimens were etched with 6% citric acid for 2 minutes and rinsed in distilled water. Control discs were dried, and the test discs were treated with the desensitizing agents as per the manufacturer's instructions. The discs as well as longitudinal sections were later analyzed under the scanning electron microscope. The proportions of completely occluded, partially occluded, and open tubules within each group were calculated. The ratios of completely and partially occluded tubules to the total tubules for all the groups was determined, and the data was statistically analyzed using nonparametric tests and statistical significance was calculated. Results: NovaMin showed more completely occluded tubules ($0.545{\pm}0.051$) while Gluma desensitizer showed more partially occluded tubules ($0.532{\pm}0.075$). The differences among all the groups were statistically significant ($P{\leq}0.05$). Conclusion: Both materials were effective in occluding dentinal tubules but NovaMin appeared more promising in occluding tubules completely after initial application.

• 대한핵의학회지
• /
• 제25권2호
• /
• pp.286-293
• /
• 1991

$^{123}I$, which is applied for the thyroid and other in vivo kinetic study, has a special role in life sciences. The 159 KeV $\gamma-ray$ from $^{123}I$ is almost ideally appropriate for the current imaging instrumentation. Its decay mode (electron capture) and short half-life (13.3 hr) reduced the burden of radiation dose to the patients, and its chemical property makes it easy to synthesize the labelling compounds. In this experiment, the production of $^{123}I$ via the nuclear reaction $^{124}Te(p,2n)^{123}I$ with 28 MeV protons was sutdied. $TeO_2$ is used as a target material, because it has good physical properties. The target was prepared with $TeO_2$ powder and was molten into a ellipsoidal cavity (a=14 mm, b=10 mm, $270.8mg/cm^2$ thick) of pure platinum. The irradiation was carried out in the external proton beam with incident energies range from 28 MeV to 22 MeV, and current was $30{\mu}A$. The loss of $TeO_2$ target was significantly reduced by using $4\pi-cooling$ system in irradiation. The dry distillation method was adopted for the separation of $^{123}I$ from irradiated target, and when it was kept 5 minutes at $780^{\circ}C$, its result was quantitative. The loss of the target material $(TeO_2)$ was below 0.2% for each production run and $^{123}I$ from the dry distillation apparatus was captured with 0.01 N NaOH in $Na^{123}I$ form, then the pH of the solution was adjusted to $7.5\sim9.0$ with HC1/NaOH. The $Na^{123}I$ solution was passed through $0.2{\mu}m$ membrane filter, and sterilized under high pressure and temperature for 30 minutes. The production of $^{123}I$ is acceptable for clinical application based on the quality of USP XXI.

• 대한디지털의료영상학회논문지
• /
• 제16권2호
• /
• pp.1-7
• /
• 2014

This study is to increase the accuracy of the diagnosis of benign prostatic hyperplasia by presenting a method that can accurately measure the residual urine amount of the bladder by using an ultrasound image. Agar powder, Propanol and distilled water were used as materials for making a phantom. In order to measure the volume, a $10m{\ell}$ cylinder, syringe and beaker were used. The image was obtained by scanning phantoms produced into six shapes. Each constant value was obtained by using the expression designed to measure the residual urine amount of the bladder and was compared and analyzed. The measuring method of Bladder volume was presented and a constant value for each shape was obtained and five observers measured it five times. According to the results of clinical application, the errors of Ellipse-beanbag, Shield-shield were 11.0%, 18.2%, respectively. Constant values depending on the shape of each phantom were presented in order to accurately measure the volume of the bladder in measuring the amount of residual urine for the diagnosis of benign prostatic hyperplasia. The accuracy of the volume using this was verified statistically(p > 0.05). Therefore, it is considered to be useful in diagnosing benign prostatic hyperplasia by using the ultrasound imaging measuring method presented.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1403-1409
• /
• 2018

In the present study, the $SrMoO_4:Eu^{3+}$ phosphors has been synthesized through hydro-thermal co-precipitation method, and single factor and orthogonal experiment method was adopted to find optimal synthesis condition. It is interesting to note that hydro-thermal temperature is a prominent effect on the luminescent intensity of $SrMoO_4:Eu^{3+}$ red phosphor, followed by co-precipitation temperature, calcining time, and the doping amount of $Eu^{3+}$. The optimal synthesis conditions were obtained: hydro-thermal temperature is $145^{\circ}C$, co-precipitation temperature is $35^{\circ}C$, the calcining time is 2.5 h, and the doping amount of activator $Eu^{3+}$ is 25%. Subsequently, the crystalline particle size, phase composition and morphology of the synthesized phosphors were evaluated by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The results show that these phosphors possess a scheelite-type tetragonal structure, and the particle size is about $0.2{\mu}m$. Spectroscopic investigations of the synthesized phosphors are carried out with the help of photo-luminescence excitation and emission analysis. The studies reveal that $SrMoO_4:Eu^{3+}$ phosphor efficiently convert radiation of 394 nm-592 and 616 nm for red light, and the luminescence intensity of $SrMoO_4:Eu^{3+}$ phosphors is improved. $SrMoO_4:Eu^{3+}$ phosphors may be a potential application for enhancing the efficiency of white LEDs.

• Archives of Plastic Surgery
• /
• 제36권3호
• /
• pp.247-253
• /
• 2009

Purpose: Hydroxyapatite(HA) has been widely used due to its chemical similarity to bone and good biocompatibility. HA is composed of macropores and micropores. Too much irregularities of the micropores are ineffective against the adhesion and proliferation of osteoblast. Many efforts have been tried to overcome these drawbacks. HA crystal coating on the irregular surface of HA scaffold, crystallized HA, is one of the method to improve cell adhesion. Meanwhile, the collagen has been incorporated with HA to create composite scaffold that chemically resembles the natural extracellular matrix components of bone. The authors proposed to examine the effect of collagen - coated crystallized HA on the adhesion and proliferation of osteoblast. Method: HA powder containing $10{\mu}m$ pore size was manufactured as 1 cm pellet size. For the making crystallized HA, 0.1 M EDTA solution was used to dissolve HA powder and heated $100^{\circ}C$ for 48 hours. Next, the crystallized HA pellets were coated with collagen (0.1, 0.5, and 1%). The osteoblasts were seeded into HA pellets and incubated for the various times (1, 5, and 9 days). After the indicating days, methylthiazol tetrazolium (MTT) assay was performed for cell proliferation and alkaline phosphatase (ALP) activty was measured for bone formation. Result: In SEM study, the surface of crystallized HA pellet was more regular than HA pellet. MTT assay showed that the proliferation of osteoblasts increased in a collagen dose - dependent and time - dependent manner and had a maximum effect at 1% collagen concentration. ALP activity also increased in a collagen dose - dependent manner and had a highest effect at 1% collagen concentration. Conclusion: These data showed that crystallization and collagen coating of HA was effective for osteoblast proliferation and ALP activity. Therefore, our results suggest that crystallized - HA scaffold with collagen coating is may be a good strategy for tissue engineering application for bone formation.

• 한국식품과학회지
• /
• 제22권3호
• /
• pp.272-277
• /
• 1990

유과 품질향상을 위한 몇 가지 첨가물의 효과와 공정개선을 위한 수침시간 단축 및 쌀가루에 의한 유과제조 시험을 수행하였다. 불린 콩을 첨가(3%, w/w)한 유과는 팽화도가 높았고 물리적 조직특성도 우수하였으며 관능검사 결과도 이들 경향과 일치하였으나 baking powder, 변형녹말과 막걸리, 소주, 청주 등 주류는 첨가효과가 인정되지 않았다. 그러나 주류는 유과의 외형적인 조직이 치밀해지는 경향을 보였다. 쌀전분의 호화근접 온도인 $60^{\circ}C$의 고온수침에서 3시간 정도면 충분한 수화가 이루어져 저온 장시간($12{\sim}14$시간) 수침한 경우와 차이가 없었으며 고온수침시간의 연장(12시간)에서는 품질개선 효과가 인정되기 않았다. 그리고 건식제분한 쌀가루로 유과를 만드는 경우 100mesh가 팽화도 및 경도에서 우수하였으나 습식제분보다 품질이 떨어져 제분방법과 제분기의 별도연구가 필요하였다.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.636-640
• /
• 2001

PDP용 녹색 형광체의 발광특성을 개선시키기 위해 고안된 액상의 화학적 합성법을 사용하여 조성식이 $Zn_{2-x}$ $SiO_4$:xMn(x=0.05, 0.08)인 형광체를 입자크기가 0.5~2$\mu\textrm{m}$로 조절하여 제조하였다. 제조된 형광체 입자는 구상이며 잘 분산된 형상을 봉주었고, 고상반응법에 비해 상대적으로 낮은 $1080^{\circ}C$에서 willemite구조의 단일상을 얻을 수 있었다. 또한 진공 자외선 영역의 147 nm의 여기원을 사용하여 광발광 특성을 조사하였다. 입자의 크기가 1$\mu\textrm{m}$이고 Mn의 도핑양이 8mole%일 때, 상용 형광체와 비교하여 발광세기는 약 40% 향상되었고 색좌표는 x=0.24, y=0.69로 거의 일치하는 결과를 얻을 수 있었다. 측정된 형광체의 잔광시간은 7.8ms이었다.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.363-363
• /
• 2001

PDP용 녹색 형광체의 발광특성을 개선시키기 위해 고안된 액상의 화학적 합성법을 사용하여 조성식이 $Zn_{2-x}$ $SiO_4$:xMn(x=0.05, 0.08)인 형광체를 입자크기가 0.5~2$\mu\textrm{m}$로 조절하여 제조하였다. 제조된 형광체 입자는 구상이며 잘 분산된 형상을 봉주었고, 고상반응법에 비해 상대적으로 낮은 $1080^{\circ}C$에서 willemite구조의 단일상을 얻을 수 있었다. 또한 진공 자외선 영역의 147 nm의 여기원을 사용하여 광발광 특성을 조사하였다. 입자의 크기가 1$\mu\textrm{m}$이고 Mn의 도핑양이 8mole%일 때, 상용 형광체와 비교하여 발광세기는 약 40% 향상되었고 색좌표는 x=0.24, y=0.69로 거의 일치하는 결과를 얻을 수 있었다. 측정된 형광체의 잔광시간은 7.8ms이었다.