• 한국한의학연구원논문집
• /
• 제10권2호
• /
• pp.1-21
• /
• 2004

1) Objective External treatments have various curative effects. So it had been used to cure various patients. But, it has a limited sphere of application in the present South Korea. Therefore we would like to bring out its sphere of application and detailed method in the oriental medicine classics. 2) Methodologies We have researched external treatment history according to below the procedure. (1) Making a related words list: We have used existing external treatments technical books to make a list. It has been connected with external treatments. It includes not only technical terms, but also general terms. (2) Searching sentence: We have searched sentence that contain terms that related with external treatments. (3) Analysis of related sentence: We have searched and classified sentence by disease. (4) Analysis of external treatment methods. 3) Conclusions From long time ago people have used external treatment to cure various disease. According to the ${\ulcorner}Nei-Jing{\lrcorner}$, hot compress therapy, fumigation therapy and bathing therapy had been used to cure blockage syndrome, muscle disease, carbuncle and cellulitis. Thereafter, a sphere of external treatment had gradually enlarged. (1) After all its sphere had included dermatologic, psychologic, internal, ophthalmic, otolaryngologic, obstetrics, gynecologic, pediatric and surgical diseases. (2) External treatment methods have contained hot compress therapy, fumigation therapy, bathing therapy, application therapy, medication bag therapy, medication plug therapy, medication massotherapy, aroma therapy and so on. (3) Medication types of external treatment have contained ointment, juice, infusion, powder, suppository and so on.

• 한국분말재료학회지
• /
• 제14권4호
• /
• pp.245-250
• /
• 2007

Dense nanostructured $2MoSi_{2}-SiC$ composites were synthesized by the pulsed current activated combustion synthesis (PCACS) method within 3 minutes in one step from mechanically activated powders of $Mo_{2}C$ and 5Si. Simultaneous combustion synthesis and densification were accomplished under the combined effects of a pulsed current and mechanical pressure. Highly dense $2MoSi_{2}-SiC$ with relative density of up to 96% was produced under simultaneous application of a 60 MPa pressure and the pulsed current. The average grain size of $MoSi_{2}$ and SiC were about 120 nm and 90 nm, respectively. The hardness and fracture toughness values obtained were 1350 $kg/mm^{2}$ and 4 $MPa{\cdot}m^{1/2}$, respectively.

• 한국분말재료학회지
• /
• 제15권2호
• /
• pp.125-135
• /
• 2008

[ $TiO_2$ ] nanotubes for photocatalytic application have been synthesized by hydrothermal method. $TiO_2$ nanotubes are formed by washing process after reaction in alkalic solution. Nanotubes with different morphology have been fabricated by changing NaOH concentration, temperature and time. $TiO_2$ nanoparticles were treated inside NaOH aqueous solution in a Teflon vessel at $110^{\circ}C$ for 20 h, after which they were washed with HCl aqueous solution and deionized water. Nanotube with the most perfect morphology was formed from 0.1 N HCl washing treatment. $TiO_2$ nanotube was also obtained when the precursor was washed with other washing solutions such as $NH_4OH$, NaCl, $K_2SO_4$, and $Na_2SO_3$. Therefore, it was suggested that $Na^+$ ion combined inside the precursor compound slowly comes out from the structure, leaving nanosheet morphology of $TiO_2$ compounds, which in turn become the nanotube in the presence of hydroxyl ion. To stabilize the sheet morphology, the different type of washing treatment solution might be considered such as amine class compounds.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.286-300
• /
• 2016

Pd-Ag alloy membranes have attracted a great deal of attention for their use in hydrogen purification and separation due to their high theoretical permeability, infinite selectivity and chemical compatibility with hydro-carbon containing gas streams. For commercial application, Pd-based membranes for hydrogen purification and separation need not only a high perm-selectivity but also a stable long-term durability. However, it has been difficult to fabricate thin, dense Pd-Ag alloy membranes on a porous stainless steel metal support with surface pores free and a stable diffusion barrier for preventing metallic diffusion from the porous stainless steel support. In this study, thin Pd-Ag alloy membranes were prepared by advanced Pd/Ag/Pd/Ag/Pd multi-layer sputter deposition on the modified porous stainless steel support using rough polishing/$ZrO_2$ powder filling and micro-polishing surface treatment, and following Ag up-filling heat treatment. Because the modified Pd-Ag alloy membranes using rough polishing/$ZrO_2$ powder filling method demonstrate high hydrogen permeability as well as diffusion barrier efficiency, it leads to the performance improvement in hydrogen perm-selectivity. Our membranes, therefore, are expected to be applicable to industrial fields for hydrogen purification and separation owing to enhanced functionality, durability and metal support/Pd alloy film integration.

• 한국분말재료학회지
• /
• 제26권5호
• /
• pp.389-394
• /
• 2019

In the present study, we have investigated the effect of sintering process conditions on the stability of the austenite phase in the nanocrystalline Fe-5wt.%Mn-0.2wt.%C alloy. The stability and volume fraction of the austenite phase are the key factors that determine the mechanical properties of FeMnC alloys, because strain-induced austenite-martensite transformation occurs under the application of an external stress at room temperature. Nanocrystalline Fe-5wt.%Mn-0.2wt.%C samples are fabricated using the spark plasma sintering method. The stability of the austenite phase in the sintered samples is evaluated by X-ray diffraction analysis and hardness test. The volume fraction of austenite at room temperature increases as the sample is held for 10 min at the sintering temperature, because of carbon diffusion in austenite. Moreover, water quenching effectively prevents the formation of cementite during cooling, resulting in a higher volume fraction of austenite. Furthermore, it is found that the hardness is influenced by both the austenite carbon content and volume fraction.

• 대한한의학방제학회지
• /
• 제26권4호
• /
• pp.341-362
• /
• 2018

Objective : This study's purpose was to review the clinical studies of Oryeong-San. Method : We searched papers about Oryeong-San using KISS, KTKP, PUBMED, Embase, Science Direct, and the key words "Goreisan", "Goreito", "Wu Ling San", "Oryeongsan", "Poria Five Powder" were used. Papers not matched with inclusion criteria were excluded. Results : Until today, there have been 133 studies on the effects of head diseases, urinary system diseases, edema, and other various effects of Oryeong-San. Of these, 23 studies were classified as clinical research papers. There were 8 cases of head diseases, 5 cases of urinary system diseases, 3 cases of edema, 2 cases of adjuvant, 1 case of Dysmenorrhea, 1 case of Primary Hypertension, 1 case of Primary Insomnia, 1 case of hydrocele, 1 case of side effects causing TINU syndrome. Conclusion : It can be seen that Oryeong-San has established the basis for application to the purpose of head disease(chronic subdural hematoma, hydrocephalus, hearing loss), urinary system disease(stone, urinary tract infection), edema, adjuvant, other hypertension and insomnia. On the other hand, considering one case that causes side effect of TINU syndrome, caution should be exercised when observing the progress of the patient taking the Oryeong-San.

• 한국분말재료학회지
• /
• 제26권1호
• /
• pp.40-44
• /
• 2019

Tungsten trioxide ($WO_3$) is a promising candidate as a photocatalyst because of its outstanding electrical and optical properties. In this study, we prepare $WO_3$ thin films by electrodeposition and characterize the photocatalytic degradation of methylene blue using these films. Depending on the voltage conditions (static and pulse), compact and porous $WO_3$ films are fabricated on a transparent ITO/glass substrate. The morphology and crystal structure of electrodeposited $WO_3$ thin films are investigated by scanning electron microscopy, atomic force microscopy, and X-ray diffraction. An application of static voltage during electrodeposition yields a compact layer of $WO_3$, whereas a highly porous morphology with nanoflakes is produced by a pulse voltage process. Compared to the compact film, the porous $WO_3$ thin film shows better photocatalytic activities. Furthermore, a much higher reaction rate of degradation of methylene blue can be achieved after post-annealing of $WO_3$ thin films.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.183-188
• /
• 2003

The controlled delivery of anticancer agents using biodegradable polymeric implant has been developed to solve the problem of penetration of blood brain barrier and severe systemic toxicity. This study was performed to prepare 5-FU-loaded poly (L-lactide-co-glycolide) (PLGA) wafer fabricated microparticles prepared by two different method and to evaluate their release profile for the application of the treatment of brain tumor. 5-FU-loaded PLGA microparticles were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), and differential scanning calorimetry (DSC). SEM observation of the 5-FU-loaded PLGA microparticles prepared by rotary solvent evaporation method showed that 5-FU was almost surrounded by PLGA and significant reduction of crystallinity of 5-FU was confirmed by XRD. In case of release profile of 5-FU from 5-FU-loaded PLGA wafer fabricated microparticles prepared by mechanical mixing, the release profile of 5-FU followed near first order release kinetics. In contrast to the above result, release profile of 5-FU from 5-FU-loaded PLGA wafer fabricated microparticles prepared by rotary solvent evaporation method followed near zero order release kinetics. These results indicate that preparation method of the 5-FU-loaded PLGA microparticles to fabricate into wafers was contributed to drug release profile.

• 터널과지하공간
• /
• 제26권5호
• /
• pp.396-408
• /
• 2016

암석파괴역학은 토목공학과 암반공학의 다양한 분야에서 널리 적용되는 학문이다. 그러나 대부분의 암반 공학 문제에서 mode II 거동이 우세함에도 불구하고 관련 연구는 mode I 거동에 대한 것이 대부분이다. 현재 mode I의 경우 4개, mode II 파괴인성의 경우 단 한 개의 ISRM 표준시험법이 있다. 본 연구에서 제안하는 새로운 시험법은 문헌조사를 통해서 필요조건으로 구속압 가능 여부, 노치성형의 용이성, 기존 시험장비의 활용, 단순한 시험절차를 정하고 이에 부합하도록 개발하였으며 SCC(Short Core in Compression)로 이름을 정하였다. Mode II 파괴인성 계산에 필요한 응력확대계수 계산식을 3차원 수치해석을 통해 선하중과 분포하중 조건에 대해서 구하였고 노치성형을 위한 지그도 제작하였다. 개발된 시험법을 MTS 시스템을 사용하여 화강암에 적용하였으며 가압속도는 0.002 mm/s로 하였다. 시험 결과 $2.33MPa{\sqrt{m}}$의 mode II 파괴인성을 얻었다. 동일한 화강암 블록에서 확보한 시험편에 대하여 간접인장시험으로 구한 mode I 파괴인성은 $1.12MPa{\sqrt{m}}$였다. 따라서 $K_{IIC}/K_{IC}=2.08$로 mode II 파괴인성이 mode I보다 크게 나타났다. 또한 비교적 매끄러운 파괴면과 암분의 생성을 통하여 SCC 시험법이 mode II 거동을 잘 표현함을 확인하였다. 따라서 제안된 SCC 시험법은 암석의 mode II 파괴인성을 결정하는 데 사용할 수 있을 것으로 판단된다.

• 한국작물학회지
• /
• 제33권s01호
• /
• pp.1-17
• /
• 1988

Rice Quality is considered to the five catagories ; the nutritional value: the characteristics of cooking. eating and processing: grain size, shape and appearance : milling yields: and storage characteristics. Because most rice is processed and consumed in whole-kernel form. the cooking and eating quality is of important and the physical properties of the intact kernel such as size, shape and general appearance are of particular significance in determining marketing quality. Eating Quality which can be directly evaluated by consumer's panel test is so complicate and variable, and thus the objective and simplified method of evaluation is required of using appropriate instruments. Even though many researches have been done to evaluate the eating quality in various aspects such as the texture of cooked rice kernels, amylogram analysis of rice powder, amylose content. gelatinization temperature. moisture absorption of rice kernel, and cooking characteristics, none of them is satisfied for the evaluation of eating quality. The improving eating quality should be also considered to many cultural factors. such as varieties, climatic and soil conditions, cultural method, handling after harvest. milling and storage conditions. In Korea, many researches in grain size. shape and appearance, and eating quality have been done with the varietal improvement mainly by rice breeders, but no effective method of evaluation was established. A few research have been done in the relationship between rice quality and cultural factors. In the future, research in rice quality should emphasize to establish the standard evaluation method in the physicochemical properties of rice kernels for application of varietal selection. and to develop cultural practices for the preserving quality characteristics of the varieties.