• Macromolecular Research
• /
• 제10권3호
• /
• pp.158-167
• /
• 2002

In order to endow with new bioactive functionality from small intestine submucosa (SIS) powder as natural source to poly (L-lactide) (PLA) and poly (lactide-co-glycolide) (PLGA) synthetic biodegradable polymer, porous SIS/PLA and SIS/PLGA as natural/synthetic composite scaffolds were prepared by means of the solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. A uniform distribution of good interconnected pores from the surface to core region was observed the pore size of 40~500 ${\mu}{\textrm}{m}$ independent with SIS amount using the solvent casting/salt leaching method. Porosities, specific pore areas as well as pore size distribution also were almost same. After the fabrication of SIS/PLA hybrid scaffolds, the wetting properties was greatly enhanced resulting in more uniform cell seeding and distribution. Five groups as PGA non-woven mesh without glutaraldehyde (GA) treatment, PLA scaffold without or with GA treatment, and SIS/PLA (Code No.3 ; 1 : 12 of salt content, (0.4 : 1 of SIS content, and 144 ${\mu}{\textrm}{m}$ of median pore size) without or with GA treatment were implanted into the back of nude mouse to observe the effect of SIS on the induction of cells proliferation by hematoxylin and eosin, and von Kossa staining for 8 weeks. It was observed that the effect of SIS/PLA scaffolds with GA treatment on bone induction are stronger than PLA scaffolds, that is to say, in the order of PLA/SIS scaffolds with GA treatment > PLA/SIS scaffolds without GA treatment > PGA nonwoven > PLA scaffolds only with GA treatment = PLA scaffolds only without GA treatment for the osteoinduction activity. The possible explanations are (1) many kinds of secreted, circulating, and extracellular matrix-bound growth factors from SIS to significantly affect critical processes of tissue development and differentiation, (2) the exposure of SIS to GA resulted in significantly calcification, and (3) peri-implant fibrosis due to covalent bonding between collagen molecule by crosslinking reaction. In conclusion, it seems that SIS plays an important role for bone induction in SIS/PLA scaffolds for the application of tissue engineering area.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 산업계
• /
• pp.99-102
• /
• 2009

This paper is to present the performance data for pressure setting method using some tile bonds for application on the Ondol-Heating floor system. For this purpose, powder and liquid tile bonds(Organic.Inorganic mixed tile bonds) were compared with the conventional tile cement for pressure setting method in the sight of the adhesive stability of porcelain tile. It tested for tiles after 14, 28days under standard condition and severe conditions. The severe conditions were water immersion and heat ageing($70^{\circ}C$). Another experimental factors concerned tile bond properties such as mixing ratio(in case of using liquid admixture), open time, which are supposed to affect the tensile strength of tile, were studied and discussed through the experiments.

• 한국세라믹학회지
• /
• 제44권4호
• /
• pp.235-239
• /
• 2007

For the pressure compaction process of the ceramic powder, the density distribution is very important for the uniform shrinkages at the sintered body. In this paper, we fabricated alumina green body using compaction process and simulated about same condition. Then comparison of simulation and experimental result confirmed that accuracy of simulation. On the average density of top and lower part was each $2.41g/cm^3,\;2.27g/cm^3$ and deviation at final step was calculated with 0.06 in simulation. Also, experiments show that total density of top and lower part was each $2.59g/cm^3,\;2.36g/cm^3$, and deviation was 0.09. Conclusion, that was not a difference to the simulation and experimental result. The application using the finite element simulation method is possible optimization of the compressing process, predict generated part of cracks and there is a possibility of getting result of more fast, more accurate then existing experience method.

• Carbon letters
• /
• 제15권1호
• /
• pp.38-44
• /
• 2014

This paper reports the effect of adding reduced graphene oxide (RGO) as a conductive material to the composition of an electrode for capacitive deionization (CDI), a process to remove salt from water using ionic adsorption and desorption driven by external applied voltage. RGO can be synthesized in an inexpensive way by the reduction and exfoliation of GO, and removing the oxygen-containing groups and recovering a conjugated structure. GO powder can be obtained from the modification of Hummers method and reduced into RGO using a thermal method. The physical and electrochemical characteristics of RGO material were evaluated and its desalination performance was tested with a CDI unit cell with a potentiostat and conductivity meter, by varying the applied voltage and feed rate of the salt solution. The performance of RGO was compared to graphite as a conductive material in a CDI electrode. The result showed RGO can increase the capacitance, reduce the equivalent series resistance, and improve the electrosorption capacity of CDI electrode.

• 한국결정성장학회지
• /
• 제10권4호
• /
• pp.279-285
• /
• 2000

부유대용융법에 의해 비휘발성 기억소자용 강유전성물질인 $YMnO_3$단결정을 육성하였다. 결정성장전 YMnO$_3$분말의 최적합성조건은 $1200^{\circ}C$에서 10시간, 최적원료봉 소결조건으로 $1500^{\circ}C$에서 10시간이었다. 초기 Seed가 없는 상태에서의 실험에서 성장된 단결정의 우선성장방위는 X-ray Laue분석을 통하여 [1010] 임을 알수 있었고 이 결정을 seed로 사용하여 c-축에 수직한 방향으로 $YMnO_3$단결정을 성장하였다 성장된 단결정은 직경 5mm, 길이 50 mm로 양질의 흑청색 결정이었다.

• 한국수소및신에너지학회논문집
• /
• 제3권2호
• /
• pp.9-15
• /
• 1992

Electroless copper plating method using an alkaline bath have been employed in copper coating of the (LM)Ni4.5Co0.1MnO.2A10.2 hydrogen storage alloy powders for electrode preparation. The plating were conducted without any pretreatment of alloy powders. For the preparation of the electrodes, about 0.12g of the copper coated alloy powder (copper to alloy ratio 1/3 by weight) was compacted with pressure of 6 tons/cm2 at room temperature. The disk-type compacts had a diameter of 10mm and thickness of about 0.24mm. The electrode characteristics were examined through SEM observations and electrochemical measurements in a half cell. The electrochemical measurement showed that the maximum discharge capacity of the electrodes prepared by using alkaline bath were 245mAh per gram of coated alloy (327mAh per gram of alloy) and appeared a considerable degradation with increasing number of cycles. The decrease of the discharge capacity after 100 cycles was about 30% It can be suggested that, with a slight of improvement, this electroless copper plating method could be applied to the preparation of the rare earth-nickel based alloy electrode.

• 한국표면공학회지
• /
• 제39권4호
• /
• pp.179-189
• /
• 2006

High velocity oxygen fuel(HVOF) thermal spray coating of WC-Co powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen and the brittleness of ceramics coating. WC-Co micron and nano powder were coated by HVOF thermal spraying method for the study of durability improvement of the high speed spindle. Coatings were planned by Taguchi program for the four spray parameters of spray distance, flow rates of hydrogen, oxygen and powder feed rate. Optimal coating process was obtained by the studies of coating properties such as porosity, surface roughness, micro hardness, and micro structure. WC-Co micron and nano powder were coated on the Inconel 718 substrate by the optimal coating process obtained in this study. The wear behaviors were studied by the sliding wear tester at room temperature and at an elevated temperature of $500^{\circ}C$ for the application to high speed spindle. Sliding wear test was carried out for four most promising hard coatings of chrome coating, ceramics coatings such as $A1_2O_3,\;Cr_2O_3$ and HVOF Co-alloy T800 for the comparison of their wear behaviors. HVOF WC-Co coating was better than other coatings showing highest micro hardness of 1400 Hv and comparable friction coefficients with others. HVOF WC-Co coating is a strong candidate for the replacement of the traditional hard chrome plating for the high speed spindle.

• 대한화장품학회지
• /
• 제40권2호
• /
• pp.121-131
• /
• 2014

산화아연은 뛰어난 자외선 산란효과로 인해 자외선 차단 화장품에 널리 이용되고 있다. 최근 화장품용으로 쓰이는 산화아연은 자외선 차단 특성, 사용감, 광촉매 활성 저하, 분산성 및 안정성 등을 보다 우수하게 하기 위해 이산화규소 등의 물질로 표면처리 하는 방법이 시행되어지고 있다. 본 연구에서는 광 노화의 원인인 자외선을 차단하는 이산화규소가 코팅된 산화아연 복합 분체를 개발하였다. 화장품 업계에서 일반적으로 쓰이는 마이크로 크기의 산화아연에 사용감, 자외선 차단 특성을 보다 우수하게 하기 위해 산업적인 용도로 많이 쓰이는 규산나트륨을 사용하여 코팅하였다. 이산화규소를 코팅하기 위해 규산나트륨과 산의 가수분해 반응에 의한 수열합성법을 적용하였다. 제조된 복합 분체의 자외선 차단 효과는 UV-Vis과 in-vitro 측정을 통하여 평가하였다. 또한 화장품에 실제 적용 하였을 때의 실질적인 장점을 확인하기 위해 사용자 관능 평가를 통해 비교분석 하였다.

• 분석과학
• /
• 제33권4호
• /
• pp.197-207
• /
• 2020

The current comparison methods with scoring systems that are used to compare visualized latent fingerprints (LF) have disadvantages. Evaluators using these methods are prone to make errors and fail to discriminate LFs correctly to notice the differences among those LFs. Therefore, a comparative and quantitative evaluation method that is capable of obtaining more objective and quantitative results is needed. Densitometric image analysis (DIA) is used in other fields as a reliable semi-quantitative comparison method. To apply DIA to LFs, the potential variables that can occur during the DIA process were tested. The visualized ridges of LFs can be compared using the concentration of dots against the background to make it possible to analyze the ridges with DIA. The variables that can be present during the DIA process include the thickness of the analysis line, the number of ridges to be taken, the number of divided zones within each of the fingerprints, and the angles of the analysis line against the ridge lines that were selected. From the analysis of the inked fingerprints and circular lines that are similar to fingerprints, the angle of the analysis lines with the ridge line was the most significant variable. The preliminary test result was applied to the comparison of LFs that were developed with the powder method and then compared with the AFIS analysis. A similar trend was found, and a more detailed and semi-quantitative comparison of the visualized LFs was possible. In the future, it is necessary to check the evaluative ability of the DIA method by analyzing the visualized LFs with other various development methods. However, DIA is currently an option that can be used as an objective comparative evaluation method during fingerprint studies with supplementary role.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1738-1742
• /
• 2009

Nanocrystalline Zn$Fe_2O_4$ oxide-semiconductor with spinel structure was synthesized by the polymerized complex (PC) method and investigated for its photocatalytic and photoelectric properties. The observation of a highly pure phase and a lower crystallization temperature in Zn$Fe_2O_4$ made by PC method is in total contrast to that was observed in Zn$Fe_2O_4$ prepared by the conventional solid-state reaction (SSR) method. The band gap of the nanocrystalline Zn$Fe_2O_4$ determined by UV-DRS was 1.90 eV (653 nm). The photocatalytic activity of Zn$Fe_2O_4$ prepared by PC method as investigated by the photo-decomposition of isopropyl alcohol (IPA) under visible light (${\geq}$ 420 nm) was much higher than that of the Zn$Fe_2O_4$ prepared by SSR as well as Ti$O_{2-x}N_x$. High photocatalytic activity of Zn$Fe_2O_4$ prepared by PC method was mainly due to its surface area, crystallinity and the dispersity of platinum metal over Zn$Fe_2O_4$.