• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.814-817
• /
• 2004

Deterioration due to de-icer salt occurs in practice in concrete pavement, dike, barrier and similar structure. This paper reports the results of effect of de-icer salt on. durability of concrete structure in winter. To protect concrete structure from damage by de-icer salt in winter, the exposure test was performed using three countermeasures such as increase in design strength upto $350kg/cm^2$, application of ggbf slag powder, and concrete sealer. Of these, the method of increase in design strength upto $350kg/cm^2$ showed better durability for deterioration by de-icer salt.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1345-1348
• /
• 1997

$YBa_2Cu_3O_x$ samples were fabricated by MPMG(Melt Powder Melt Growth). The effects of the $Y_2BaCuO_5$ and Ag addition on $YBa_2Cu_3O_x$ were studied throuth the Jc, Tc and magnetization. For the application of the bulk HTSC to current limiter, fly wheel and current lead and so on, the critical charateristics were investigated and compared with the solid sintering method.

• 분석과학
• /
• 제26권1호
• /
• pp.27-33
• /
• 2013

유기염화실란을 출발물질로 사용하고 초음파 반응 방법을 이용하여 알칼리 금속과 반응시켜 탈염소축합반응으로 폴리(디알킬)실란과 폴리(모노알킬)실란 등의 폴리알킬실란들을 합성하고 이들의 열적성질을 TGA로 조사하여 각각 10-20%와 40-60%의 잔류물 수득률을 얻었고 상업용 SiC 분말과 함께 펠렛 디스크를 성형하여 열분해 과정과 SEM, XRD 등으로 세라믹 복합체 응용 가능성을 조사하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2012년도 춘계학술논문집 1부
• /
• pp.431-435
• /
• 2012

Aluminum containing mesoporous molecular sieves Al-SBA-1 ($n_{Si}/n_{Al}$= 2, 5, 10, 15) was synthesized with a one-step method, and the catalyst was characterized with powder X-ray diffraction (XRD), nitrogen adsorption-desorption, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Finally, we studied the catalytic activities of Al-SBA-1 molecular sieves in Pechmann reaction of 3-methoxyphenol and Ethyl acetoacetate to get 7-methoxy-4-methyl coumarin. Four parameters reaction temperature, time, catalyst weight and reactants ratio were optimized.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.523-526
• /
• 2005

In order to traffic safety during winter season, snowfall and cold area has been spread the deicing chemicals, and the spraying amount is increasing every year. Use of deicing chemicals has been and will continue to be a major part of highway snow and ice control methods. Chloride-containing chemicals such as calcium chloride or rock salt are main deicers for the road. Extensive use of chloride deicers is, however, the source of substantial cost penalties due to their corrosive action and acceleration to deterioration concrete structures. Deterioration due to de-icer salt occurs in practice in concrete pavement, dike, barrier and similar structure. This paper reports the results of effect of de-icer salt on durability of concrete structure in winter. To protect concrete structure from damage by de-icer salt in winter, the exposure test was performed using three methods such as increase in design strength upto 32MPa application of granulated blast furnace slag powder, and concrete sealer. Of these, the method of increase in design strength upto 32MPa showed better durability for deterioration by de-icer salt.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1489-1491
• /
• 1996

The effect of Ag alloy sheath have been investigated in terns of critical current density and mechanical property. Nevertheless the continuous improvement of critical current density($J_c$) of Ag sheathed Bi2223 oxide superconducting wire processed with powder in tube(PIT) method, poor mechanical strength is still considered to be demerits for power application. In this study, we prepared two kinds of Ag- x wt% Cu alloy and pure Ag sheathed Bi2223 superconducting tapes. The hardness and tensile strength of prepared tapes has been measured. Their mechanical propertes were improved by Ag alloying.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.497-501
• /
• 2003

In order to manufacture ceramic capacitors for the industrial electronic parts application using Tape casting method, the dielectric properties as a functions of sintering temperatures and the fabrication conditions of green sheet were investigated to consider the possibility of applications. When the mixing ratio of powder and solvent in slurry was 65:35, the uniform and dense green sheets was obtained. The dielectric constant was increased as the sintering temperature Over 94% of relative density and high were obtained to the specimens sintered at $1000^{\circ}C$. We can find that the device sintered at higher temperature than $1000^{\circ}C$ showed the relative density over 94% and the dielectric constant over 2000.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.745-752
• /
• 1996

Wear property of plasma spray coating in $Cr_2O_3$ powder manufatured of spray dry method on the aluminum substrate was inspected for the application of piston-ring of automotive enginel. The plama spray coatings were varied with feed rate and particle size. Used the ball-on disc type tribometer, wear volume, friction, surface rougness were investigated. The delamination of the coating layer were observed with SEM. Also the cross-section of wear track were investigated, using optical microscopy. As a result of experiment, wear mechanism was addressed in the various coating process.

• 한국표면공학회지
• /
• 제30권1호
• /
• pp.57-62
• /
• 1997

Green-emitting $ZnGa_2O_4$ : Mn phosphors were synthesized by a thermal method and their low-voltage cathodoluminescent characteristics were examined for the field emitter display (FED) application. Low efficiency of $ZnGa_2O_4$ : Mn phosphors could be ascribed to the low penetration depth of into phosphors, which might results in charge accumulation on the phosphors screen. For increasing cathodoluminescent of $ZnGa_2O_4$ : Mn under low voltage excitation, wide band-gap oxide materials were added to the $ZnGa_2O_4$: Mn powder. It is found that the luminance can be increased by 20%. Measurement of leakage current on the phosphor screen shows that the enhancement of low-voltage cathodoluminescent by additive materials is mainly due to the consumption of surface charges on the phosphor.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.98-103
• /
• 1999

The application field of porous mold is more and more expended. A mixture of alumina and cast iron is used for making porous mold using slip and vacuum casting method in this study. Slip casting is a process that slurry is poured into silicon rubber mold, dried in vacuum oven, debinded and sintered in furnace, In this procedure, slurry is composed of powder, binder, dispersion agent, and water. Vacuum casting is a technique for removing air bubbles existed in the slurry under vacuum condition. Since ceramics has a tendency of over-shrinkage after sintering, cast iron is used to compensate dimensional change. The results shows that sintering temperature has a great effect on characteristics of alumina-cast iron composite sintered parts. Finally ceramic-metal composite sintered mold can be used for aluminum alloy casting of shoe mold using this process.