• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.29-37
• /
• 2013

In order to apply the silver cementation method using Fe powder from pregnant thiourea leaching solution. Parameters such as the amount of Fe powder addition, agitation speed, and temperature were investigated. The silver cementation rate was increased by the increasing of Fe powder addition, agitation speed, and temperature. The highest silver cementation rate was found when the addition of Fe powder was 50 g/L at the agitation speed of 500 rpm. The silver cementation rate increase with increasing temperature according to the Arrhenius equation and obeys $1^{st}$ order kinetics. The activation energy from the kinetics data was found to be between 13.73 KJ/mol and 17.02 KJ/mol. In the XRD analysis, goethite was detected in the precipitate of the thiourea leach solution. This indicates that an oxidation-reduction reaction had occurred in the thiourea solution due to the addition of the Fe powder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.338-343
• /
• 2017

In this study, blast furnace slag powder was used in concrete to help reduce carbon dioxide emissions and to recycle industrial waste. Blast furnace slag powder is a byproduct of smelting pig iron and is obtained by rapidly cooling molten high-temperature blast furnace slag. The powder has been used as an admixture for cement and concrete because of its high reactivity. Using fine blast furnace slag powders in concrete can reduce hydration heat, suppress temperature increases, improve long-term strength, improve durability by increasing watertightness, and inhibit corrosion of reinforcing bars by limiting chloride ion penetration. However, it has not been used much due to its low compressive strength at an early age. Therefore, this study evaluates the effects of steam curing for increasing the initial strength development of concrete made using slag powder. The relationship between compressive strength, SEM observations, and XRD measurements was also investigated. The concrete made with 30% powder showed the best performance. The steam curing seems to affect the compressive strength by destroying the coating on the powder and by producing hydrates such as ettringite and Calcium-Silicate-Hydrate gel.

• Journal of the Korean Ceramic Society
• /
• v.30 no.6
• /
• pp.499-509
• /
• 1993

Structures of hematite(${\alpha}$-Fe2O3), Ba-ferrite(BaFe12O19) and Zn2Y(Ba2Zn2Fe12O22) were studied by powder X-ray diffraction(XRD) method. Powder XRD patterns of the ferrites were analyzed with the Rietveld method, and the final refined R-factors were RWP<0.01 and RI<0.03. The lattice parameters refined with hexagonal crystal system were a=5.0342${\AA}$, c=13.746${\AA}$ for hematite, a=5.8928${\AA}$, c=23.201${\AA}$ for Ba-ferrite, and a=5.8763${\AA}$, c=43.567${\AA}$ for Zn2Y. In the hematite, the oxygen parameter is 0.3072 and the Fe-O distances in FeO6octahedron are 1.941${\AA}$ and 2.118${\AA}$, close to the single crystal data of Blake et al.. In the Ba-ferrite, the Fe atom in oxygen trigonal bipyramid is displaced 0.155${\AA}$ away from the BaO3 mirror plane into 4e position. In the Zn2Y, 75% of Zn is located at the oxygen terahedral site in S-block.

• Journal of the Korean Ceramic Society
• /
• v.26 no.5
• /
• pp.682-690
• /
• 1989

Fine mullite powder was prepared by colloidal sol-gel route. Boehmite as a starting material of Al2O3 and silica sol or fumed silica as a starting material of SiO2 were used. $\alpha$-Al2O3, TiO2 and ZrO2 were used as seeding materials. The combination of boehmite and silica was found to be the stoichiometric mullite powder. Techniques for drying used were spray drying, freeze drying, reduced pressure evaporation and drying in a oven. The gelled powder was heated at 130$0^{\circ}C$ for 100min and was attrition-milled for 1~3hrs. The mullite powder obtained was composed of submicrometer, uniform and spherical particles with a narrow size distribution. The mullite powder was characterized by BET, SEM, XRD and IR spectroscopy.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.436-437
• /
• 2006

The $Ag/TiO_{2-x}N_x$ nanoparticles were synthesized by photochemical deposition in a $TiO_{2-X}N_X$ suspension system. The prepared products were characterized by means of XRD, Uv-vis and photoluminescence spectra (PL). Its photocatalytic activity was investigated by the decomposition of methylene blue (MB) solution under illumination of visible and ultraviolet light, respectively. Compared to $TiO_{2-x}N_x$, the photocatalytic activity of the as-prepared $Ag/TiO_{2-x}N_x$ is obviously enhanced due to the decreasing recombination of a photoexcitated electron-hole pairs. The Mechanism in which photocatalytic activity is enhanced has been discussed in detail.

• Journal of Powder Materials
• /
• v.8 no.4
• /
• pp.239-244
• /
• 2001

To investigate the effect of process parameters on selective laser sintering of Cu/polyamide mixed powder, Cu/polyamide mixed powder was sintered by selective laser with changing laser power and scanning speed. The properties of sintered body were evaluated by measuring the density and tensile strength, and analysis of XRD, FT-Raman and microstructure. With an increase in the laser power, the density and ultimate tensile strength of sintered Cu/polyamide body increase and then decrease. The maximum values of the density and ultimate tensile strength were decreased with increasing laser scanning speed. These changes were concerned with the difference of irradiation energy of laser into the powder layer. It was considered that the change of the mechanical property of the sintered body with irradiation energy of laser is due to the changes of amount of copper particle and property of polyamide.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.697-704
• /
• 2021

It is hard to get Filaments which are materials of the 3D printing Fused Deposition Modeling(FDM) method as radiation shielding in Korea. and also related research is insufficient. This study aims to provide basic data for the development of radiation shields using 3D printing by evaluating the physical properties and radiation shielding capabilities of filaments containing metal particles. after selecting five metal filaments containing metal particle reinforcement materials, the radiation shielding rate was calculated according to the Korean Industrial Standard's protective equipment test method to evaluate physical properties such as tensile strength, density, X-ray Diffraction(XRD), and weight measurement using ASTM's evaluation method. In the tensile strength evaluation, PLA + SS was the highest, ABS + W was the lowest, and ABS + W is 3.13 g/cm³ which value was the highest among the composite filaments in the density evaluation. As a result of the XRD, it may be confirmed that the XRD peak pattern of the particles on the surface of the specimen coincides with the pattern of each particle reinforcing material powder metal, and thus it was confirmed that the printed specimen contained powder metal. The shielding effect for each 3D printed composite filament was found to have a high shielding rate in proportion to the effective atomic number and density in the order of ABS + W, ABS + Bi, PLA+SS, PLA + Cu, and PLA + Al. In this study, it was confirmed that the metal particle composite filament containing metal powder as a reinforcing material has radiation shielding ability, and the possibility of using a radiation shielding filament in the future.

• Journal of the Korean Chemical Society
• /
• v.56 no.5
• /
• pp.563-570
• /
• 2012

Solid acid Mo(VI)/$ZrO_2$ with 2-10% Mo(VI) was coated on honeycomb monoliths by impregnation method. These catalytic materials were characterized by BET, $NH_3$-TPD/n-butylamine back titration, PXRD and SEM techniques. Phenyl salicylate (Salol) was synthesized via transesterification of methyl salicylate and phenol over these catalytic materials. An excellent yield (91.0%) of salol was obtained under specific reaction conditions. The effect of poisoning of acid sites of the catalytic material by adsorbing different bases and its effect on total surface acidity, powder XRD phases and catalytic activity was studied. A triangular correlation between the surface acidity, powder XRD phases and catalytic activity of Mo(VI)/$ZrO_2$ was observed. The thermally regenerated catalytic material was reused repeatedly with a consistent high yield of salol.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.372-376
• /
• 1998

Using calcium-phosphate-powder targets with the Ca/P ratios of 1.0-1.67, hydroxyapatite ($Ca_{10}(PO_4)_6(OH)_2$, HAp) thin films with 4-7㎛ thickness were prepared on titanium metal plates by r.f. magnetron sputtering, followed an annealing at $200^{\circ}C$ for 24 hr under a high water vapor pressure using an autoclave. All the specimens were systematically characterized by XRD, FT-IR, SEM and EDS analyses. The post-annealed films were confirmed to be a nonstoichiometric oxyhydroxyapatite by XRD and FT-IR measurements.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.49-55
• /
• 1999

Al-Cr-Zr nanocomposite metal powders were prepared by mechnical alloying (MA) in order to develop aircraft structure materials with lighter weight and lower cost than the conventional Ti and Ni alloys. The morphological changes and microstrutural evolution of Al-6wt.%Cr-3wt.%Zr nanocomposite metal powders during MA were investigated by SEM, XRD and TEM. The approximately 50$\mu$m sized Al-Cr-Zr nanocomposite metal powders has been formed after 20 h of MA. The individual X-ray diffraction peaks of Al, Cr and Zr were broadened and peak intensitied were decreased as a function of MA time. The observed Al crystallite size by TEM was in the range of 20 nm, which is a simliar value calculated by Scherrer equation. The microhardness of Al-Cr-Zr nanocomposite metal powders increases alomost linearly with increase of the processing time, reaching a saturation hardness value of 127 kg/$mm^2$ after 20 h of processing. The intermetallic compound phase of $Al_3Zr_4$ in the matrix was identifed by XRD and TEM.