• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.8
• /
• pp.348-353
• /
• 2003

This paper was the research of high voltage suspension insulator (400 [kN]) including pottery stone, feldspar, clay and alumina of 17 [wt%]. The slurry was fabricated after ball milling mixed raw materials. Green compacts were made by the extrusion of jiggering method and were sintered at 1300[$^{\circ}C$] for 50 [min.] in the tunnel kiln. The sintered density was reached to 97% of theoretical density, and the bending strength was 1658 [k $g_{f}$/$\textrm{cm}^2$] and hardness and fracture toughness which was measured by ICL( indentation crack length ) method were 1658 (kgf/$\textrm{cm}^2$) and 27.5 [Gpa], respectively. In measurement of tana and insulation break voltage of 400 (kN) porcelain, tan$\delta$ took some numerical value between 17${\times}$10$_{-3}$ and 61${\times}$10$_{-3}$ and insulation break voltage value was 19.9$\pm$1.4 [㎸/mm]. The test was performed to research whether the shape of pin affect a overvoltage break load or not As a consequence, when a pin was designed a pin diameter 51 [mm] with the bottom form of two-step constructed with straight in the suspension insulator, Insulator showed overvoltage break load 52 [ton] of the highest value and reflected a fine characteristic in aged deterioration test which is one of the accelerated aging test. Also it could be confirmed a fine characteristic through performing the test that electrical property of insulator was established correctly in accordance with IEC 60383-1 standards.s.

• Journal of Digital Contents Society
• /
• v.16 no.1
• /
• pp.113-121
• /
• 2015

Artifact pattern representation of a method using the digital technology is largely are two digital rubbing technique and digital contrast technique. Digital rubbing technique is clearly with the naked eye to see the original prestigious and difficult to build a digital rubbing data patterns by scanning a prestigious and patterns carved into the artifacts in three dimensions without compromising the circle to represent the three-dimensional effect by contrast it to the objective value refers to a technique that can be represented in digital. Digital contrast technique can not be calculated if the depth information of the object due to the glassy film of artefacts in a three-dimensional surface scanning and the application of this technique refers to a realistic image mapped digital technique for generating digital image contrast. Digital rubbing technique is mainly useful to express the most prestigious and patterns expressed in pottery or tile and stone monument, etc. engraved or embossed, digital contrast techniques can be used effectively to artifacts such as magnetic or glass can not be applied to the digital rubbing technique.

• Journal of Conservation Science
• /
• v.7 no.1
• /
• pp.23-30
• /
• 1998

The examination of scientific analysis could give many information on the object of ancient glass. It would be allowed to understand the cultural situation and a course of inflow that the data of glass composition was classified by raw materials, technique of making, period and regional groups. Quantitative analysis conditions for SEM-EDS were set for glass and glaze on the pottery and 62 samples of glass beads excavated from Yangdong-ri remains at Kimhae were analyzed and classified. It was found that the glass beads were made of all alkali-glass. In addition, it was postulated that the potash glass was appeared from the 1st century A.D. and soda glass was appeared from the late second or early 3rd century A.D. in this region. The colors of glass were closely related to the concentration of metallic elements such as copper, iron and manganese. It was confirmed that the composition of glass beads could be classified and characterized by raw materials, color, period and regional groups.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.748-754
• /
• 2010

To reduce the computational cost required for assembling vessel fragments using surface geometry, this paper proposes a fast axis estimation method. Using circular constraint of pottery and local planar patch assumption, it finds the axis of the symmetry. First, the circular constraint on each cylinder is used. A circular symmetric pot can be thought of unions of many cylinders with different radii. It selects one arbitrary point on the pot fragment surface and searches a path where a circumference exists on that point. The variance of curvature will be calculated along the path and the path with the minimum variance will be selected. The symmetric axis will pass through the center of that circle. Second, the planar patch assumption and profile curve is used. The surface of fragment is divided into small patches and each patch is assumed as plane. The surface normal of each patch will intersects the axis in 3D space since each planar patch faces the center of the pot. A histogram method and minimization of the profile curve error are utilized to find the probability distribution of the axis location. Experimental results demonstrate the improvement in speed and robustness of the algorithms.

• Journal of Acupuncture Research
• /
• v.32 no.2
• /
• pp.131-145
• /
• 2015

Objectives : The purpose of this study was to demonstrate the effectiveness and availability of salt pharmacopuncture of Korean sun-dried salt and processing salt on the basis of bibliographical review. Methods : This study was done through a narrative review of related bibliography including medical books, journals, general bibliography, and web sites. Results : 1. Korean sun-dried salt is produced in the ground with soil, tiles, and pottery. Sun-dried, traditional, granulated, bamboo, and grilled salts are all appropriate for medical use. They are composed of a lower level of NaCl and unnecessary substances, and have a higher water and mineral content. 2. The 9~30 g of NaCl included in the physiological saline matches the ratio of a normal human body. However, if the saline is used for water supply, it should be improved because the recommended amount is much lower. 3. Medicine that includes NaCl is applied for lessening the congestion of the nasal cavity, alleviating cornea swelling, or for a lack of water. NaCl can also be used for washing contact lenses as well as cleaning the mucous membrane of the eyes and nose. 4. Salt relieves anger, detoxifies, induces vomiting, builds strong muscles and bones, gives energy, slows aging, and ultimately improves health. 5. Salt treats many diseases including: cardiovascular, hematosis, respirometer, obstetric, musculoskeletal, mineral supplement, eye, teeth and skin issues, etc.. However, salt is not used for treating asthma, cough, or other ailments mainly affecting the vascular system. 6. While NaCl in salt absorbs water and the vascular constriction results in higher blood pressure, the pressure induced from salt is actually a physiologically temporary rise. Rather, salt helps remove oil from the body and its potassium lowers blood pressure. Conclusions : It was suggested that salt pharmacopuncture of Korean sun-dried salt and processing salt should be made available for adjusting the physiological salt concentration and control of the Na side effects, therefore it would be useful in the treatment of diseases.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.411-416
• /
• 2012

The purpose of this study was to analyze AMS radiocarbon dating, using wiggle match, of a charcoal column excavated from a fired dwelling site (ra-#8) at the Pungnaptoseong earthen wall made in Baekje era. The result of wiggle matching for 6 decadal single-ring samples of the charcoal produced ${\pm}2{\sigma}$ radiocarbon date (95.4% confidence interval) as A.D. 190~280. It indicated that the dwelling site (ra-#8) belonged to the early and middle of the 3rd century. Radiocarbon dating results confirmed the date speculated by archaeologists according to dwelling structure and pottery style.

• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.476-485
• /
• 2001

Both concave and convex roof-end tiles having same style and shape are excavated in Yongjangsung castle at Jindo and Burnhwasa temple at Wando in Jeollanam-Do that are the Sambyulcho's resistance sites against Mongolia in the late Koryo dynasty. Obtained data by NAA have been used to classify the equality of a raw materials' porvenance by multiple correlation analysis(MCA) and discriminant analysis. The results of MCA has shown that there are very high correlation for [La : Sm], and [Lu : Yb]. Exactly pottery site at Chungdo, roof tile site at Chungyang, Yongjangsung castle and Bumhwasa temple and Chunghaejin site at Jangdo were distributed for four trace elements, Cr, Sc, ${\Delta}$(${\Sigma}$(Lu, Yb)) and Eu by discriminant analysis, and their accuracy is above 95%. This means that Yongjangsung castle and Bumhwasa temple have same raw material's provenance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.103-108
• /
• 2019

The cooling rate and the uniformity of mold temperature, in the injection molding process, possess great influences on the productivity and quality of replications. The conformal cooling channel, which is of a uniform spacing from the mold cavity by the metal additive manufacturing process, receives much attention recently. The purpose of this study is to develop a mold core with a curved conformal cooling channel for a pottery-shaped thick-wall cosmetic container through the hybrid method of direct metal tooling (DMT) process. In this study, we design a mold core that contains the curved cooling channel for the container. A method that divides the cavity is proposed and the DMT process is carried out to form the curved cooling channel. The test mold core, with the curved conformal cooling channel, has been fabricated by the proposed method to confirm the feasibility of the design concept. We show that no leakage is observed for the additive manufactured test mold core, and its physical properties demonstrate that it can be sufficiently used as the injection mold core.

• YAKHAK HOEJI
• /
• v.50 no.6
• /
• pp.381-385
• /
• 2006

Previously we have reported that black ginseng was produced by nine-time repeated steaming 5-year fresh ginsengs at 95${\circ}$C for 3hr in pottery apparatus and drying at 60${\circ}$C for 12${\sim}$36 hr and had an outstanding anticancer activity. This study was designed to examine the ability of black ginseng to suppress body weight gain appetite, and to investigate the effect of black ginseng on lipid profile in male rats fed normal diets. The extract of black ginseng was administered daily for 3 weeks, and the changes of body weight and food intake were measured. After administering the extracts for 3 weeks, the fat weight and serum lipid levels were also measured. Black ginseng persistently suppressed weigh gain and food intake was also reduced, but not significantly; The weight of both epididymal and abdominal fats was decreased In black ginseng-treated rats. Serum triglyceride level in rats administered with black ginseng was also significantly lowered. Therefore, these results reveal that the repeated administration of black ginseng causes a suppression of body weigh gain by decreasing triglyceride level in blood and body fat deposit.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.697-703
• /
• 2023

Intertidal zones, akin to tidal flats, are among the potential areas where underwater cultural heritage might be submerged. However, the shallow depths in these regions present challenges for conventional vessel-based survey methods. Moreover, during low tides, intertidal zones transform into tidal flats, limiting the efficiency of survey efforts due to restricted access and potential risks. As a result, proper underwater cultural heritage surveys encounter difficulties in these environments. In recent times, extensive research is underway to address these issues by investigating underwater cultural heritage surveys in intertidal zones, encompassing diverse fields, including equipment-based investigations. This study aimed to explore the feasibility of utilizing unmanned aerial vehicles (UAVs) to conduct intertidal cultural heritage surveys, employing aerial photography and 3D mapping to create detailed orthoimages and 3D models. The study focused on assessing the potential application of these techniques for cultural heritage surveying within intertidal zones. Notably, the survey conducted in Jindo's Naesan-ri demonstrated high-resolution capabilities, enabling the distinction of actual pottery fragments mixed within gravel fields. Similarly, in the survey of Jindo's Byeokpa-hang, it was found that a wooden pillar structure existed in a section about 200m long. The integration of various sensors, including LiDAR, with UAVs allows for diverse investigation possibilities, including bathymetric measurements, and is expected to facilitate the acquisition of varied datasets for further research and assessment.