• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.3-11
• /
• 2011

The objective of this study was to select appropriate sites for reforestation CDM using satellite image and spatial data in North Korea. A suitable site for reforestation CDM can be defined as non-forest area since 1990. To detect land cover change between two different years and to delineate potential reforestation CDM site(unstocked forest, converted crop land, denuded bare land), Landsat TM satellite image which was scanned in 1988 and SPOT Pan-sharpened image which was scanned in 2007 were used. As a result of classification, 1,214 ha of forest area in 1989 had been converted to other land cover types in 2007. and 2,245 ha of the total study area was detected to be suitable for reforestation CDM. 79.2% of total potential CDM sites was converted crop land. Through topography and accessibility analysis for potential reforestation CDM sites detected by satellite image, suitability index was calculated and the potential reforestation area was reclassified into suitability grades.

• Bulletin of the Korea Photovoltaic Society
• /
• v.4 no.2
• /
• pp.14-24
• /
• 2018

The potential induced degradation (PID) phenomenon of crystalline silicon photovoltaic (PV) modules has been often found in outdoor PV systems until recently since firstly reported in 2010. Many studies have been conducted about the mechanism and the preventive methods, but systematic diagnosis of the PID has not been applied on-site. This paper focuses on analysis of 5 categories and 10 PID diagnosis methods using the monitoring data, light current-voltage, dark current-voltage, infrared and electroluminescence. We expect to contribute to improvement of power generation through PID diagnosis and troubleshooting in PV plants.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.3
• /
• pp.18-27
• /
• 1998

Molecular dynamicsinvestigations of ion implantation considering point defect generation were performed with ion energies in the range of ~1keV, Simulation starts perfect diamond cubic lattice site. Stillinger-Weber potential and ZBL potential were used to calculate forces between atoms. We have simulated slowing-down of ion velocity, ion trajectory and coupled-coing between ion and silicon. We also discussed distribution of point defect using rdial distribution function. We found that interstitial produced by ion bombardment mainly formed interstitial cluster.

• Journal of Microbiology
• /
• v.39 no.2
• /
• pp.83-88
• /
• 2001

There is considerable interest in how microbiological processes can affect the behaviour of metal contaminants in natural and engineered environments and their potential for bioremediation. The extent to which microorganisms can affect metal contaminants is dependent on the identity and chemical form of the metal and the physical and chemical nature of the contaminated site or substance. In general terms, microbial processes which solubilize metals increase their bioavailability and potential toxicity, whereas those that immobilize them reduce bioavailability. The balance between mobilization and immobilization varies depending on the metal, the organisms, their environment and physico-chemical conditions.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.455-463
• /
• 2006

The electrical resistivity prospecting method with dipole-dipole array was applied to the Mooreung landfill site in order to survey the existence of leachate around the landfill site. Moreover, if there is leachate within Mooreung landfill site, the analysis of potential pathways to exterior environments was tried. Within the landfill site, the over-all characteristics of the electrical resistivity anomalies suggest that the leachate induced from the landfill materials has infiltrated the basement rock and fill the pores of basement rock in some parts of the landfill site. The consistency of the anomaly locations (left part of each survey line), anomaly geometries, and absolute resistivity value of anomaly through the 3 survey lines suggests that the resistivity anomaly be connected from the upstream to the downstream and correspond to the leachate material. Finally, the result from the electrical resistivity survey line near the gateway of the landfill site suggests that some of the leachate induced from landfill material leaks to the exterior groundwater system. It is necessary that more surveys using both geochemical and geophysical methods should be performed to find out potential pathways and depths of the leachate more precisely.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.141-150
• /
• 2000

In this study liquefaction hazard potential was assessed by modified Seed and Idriss method and maps of liquefaction hazard potential utilized by LPI(Liquefaction Potential Index) and FE(Equivalent Liquefaction Factor of Safety) were constructed in two dimensional space, Comparisons of liquefaction hazard maps assessed by LPI and FE are represented to verify the FE method proposed in this study. Based on the results of comparing liquefaction hazard map using LPI and FE there is similar distribution trend of zonation indices. from the result of comparison of liquefaction hazard maps of FE base using Hachinohe and ofunato PGA(Peak ground Acceleration) data at one site of port and harbor in Korea the values of FE in liquefaction hazard map using Hachinohe data are underestimated. And in the view of quantitative analysis FE is more convenient than LPI because types of results from FE are factor of safety that widely used in geotechnical practice and aseismic design standard for port and harbor in Korea.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1512-1519
• /
• 2005

In this study, the potential for liquefaction in the Incheon international airport was calculated by appling the standard penetration test data and laboratory test data to the modified Seed & Idriss(2001) method. The analysis was performed on the non-plastic silty layer and silty sand layer which within the depth of 20m, below 20 of the standard penetration value(N), and the ground water level. Also, each set of data was mapped by using GIS(geographic information systems) and the factor of safety for the potential for liquefaction was obtained by overlapping those layers. As a result, it was found that there exist potential hazard zone for the liquefaction partially. So, the additional detailed assessments for those are thought to be necessary.

• Mycobiology
• /
• v.44 no.2
• /
• pp.85-92
• /
• 2016

Mycoherbicides are exclusive biotechnology products which offer a non-chemical solution to control noxious weeds on the land as well as aquatic in systems, viz a viz saving environment from hazardous impact of synthetic chemicals. The present paper highlights the mycobiota associated with Eichhornia crassipes infesting Harike wetland area of Punjab and evaluation of their pathogenic potential for futuristic application as a mycoherbicide. Of the 20 isolates tested by leaf detached assay and whole plant bioassays, only one isolate (#8 BJSSL) caused 100% damage to E. crassipes. Further, the culture filtrate of this isolate also exhibited a similar damage to the leaves in an in vitro detached leaf assay. The potential isolate was identified as Phaeoacremonium italicum using classical and modern molecular methods. This is the first report of P. italicum as a pathogen of E. crassipes and of its potential use as a biological control agent for the management of water hyacinth.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.14-21
• /
• 2016

This study evaluated the applicability of stabilization of arsenic (As)-contaminated soil with iron (Fe) oxides at the former Janghang smelter site. Three Fe oxides (magnetite, goethite, and hematite) were tested as stabilizing agents to one soil sample collected from the study site. Amendment of 5% of magnetite, goethite, or hematite for one week showed the 64, 58, and 36% of reduction of the SBRC (Solubility/Bioavailability Research Consortium)-extractable (bioaccessible) As, respectively. Duration of stabilization more than one week did not show an additional reduction in SBRC-extractable As. Amendment of 5% of magnetite, which showed the highest As stabilization efficiency, was applied to 24 soil samples collected from the same site for one week, and 72% of reduction in the bioaccessible As was observed. The potential carcinogenic human health risk at the study site caused by As was $1.7{\times}10^{-5}$, which could be reduced to $8.1{\times}10^{-6}$ by the amendment of 5% magnetite for one week.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.1
• /
• pp.55-63
• /
• 2013

Nuclear power plant site selection is a complex process and its successful completion is a critical milestone in the NPP development cycle. Proper siting of NPP will ensure public health and safety, environmental conservation, reduced project failure risks and a smooth NPP development process among other benefits. The objective of this paper is to demonstrate the application of systems engineering to the problem of NPP siting in Kenya. The siting process demonstrated in this paper includes stakeholder need analysis where stakeholders are identified and their needs concerning NPP site are elicited and converted into system functional requirements. A value model is then developed and potential sites iteratively subjected to three types of criteria i.e. exclusionary criteria, avoidance criteria and suitability criteria. This process is used to identify the candidate sites. An additive value model; multiple objectives Decision Analysis (MODA) is then used to calculate candidate solutions values. The site with the highest solution value score is selected. Sensitivity studies using different criterion weight sets (thereby reflecting different viewpoints) can be conducted to assess their effect on the selection of a preferred site and thereby lend additional credibility to the decision process.