• Journal of Microbiology and Biotechnology
• /
• v.26 no.7
• /
• pp.1290-1302
• /
• 2016

Microalgae are being researched for their potential as attractive biofuel feedstock, particularly for their lipid production. For maximizing biofuel production, it is necessary to explore the effects of environmental factors on algal lipid-producing potential. In this study, the effects of nitrogen (N) sources (NO₂-N, NO₃-N, urea-N, NH₄-N, and N-deficiency) and carbon-to-nitrogen ratios (C/N= 0, 1.0, 3.0, and 5.0) on algal lipid-producing potential of Chlorella sp. HQ were investigated. The results showed that for Chlorella growth and lipid accumulation potential, NO₂-N was the best amongst the nitrogen sources, and NO₃-N and urea-N also contributed to algal growth and lipid accumulation potential, but NH₄-N and N-deficiency instead caused inhibitory effects. Moreover, the results indicated that algal lipid-producing potential was related to C/N ratios. With NO₂-N treatment and carbon addition (C/N = 1.0, 3.0, and 5.0), total lipid yield was enhanced by 12.96-20.37%, but triacylglycerol (TAG) yields decreased by 25.52-94.31%. As for NO₃-N treatment, carbon addition led to a 17.82-57.43%/25.86-82.67% reduction of total lipid/TAG yields. When NH₄-N was used as the nitrogen source, total lipid/TAG yields were increased by 46.67-113.33%/28.99-74.76% with carbon addition. The total lipid/TAG yields of urea-N treatment varied with C/N ratios. Overall, the highest TAG yield (TAG yield: 38.75 ± 5.21 mg/l; TAG content: 44.16 ± 4.35%) was achieved under NO₂-N treatment without carbon addition (C/N = 0), the condition that had merit for biofuel production.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.162-178
• /
• 2015

Petroleum based fossil fuels used to power most processes today are non-renewable fuels. This means that once used, they cannot be reproduced for a very long time. The maximum combustion of fossil fuels occurs in automobiles i.e. the vehicles we drive every day. Thus, there is a requirement to shift from these non-renenewable sources of energy to sources that are renewable and environment friendly. This is causing the need to shift towards more environmentally-sustainable transport fuels, preferably derived from biomass, such as biodiesel blends. These blends can be made from oils that are available in abundance or as waste e.g. waste cooking oil, animal fat, oil from seeds, oil from algae etc. Waste Cooking Oil(WCO) is a waste product and so, converting it into a transportation fuel is considered highly environmentally sustainable. Keeping this in mind, a life cycle assessment (LCA) was performed to evaluate the environmental implications of replacing diesel fuel with WCO biodiesel blends in a regular Diesel engine. This study uses Life Cycle Assessment (LCA) to determine the environmental outcomes of biodiesel from WCO in terms of global warming potential, life cycle energy efficiency (LCEE) and fossil energy ratio (FER) using the life cycle inventory and the openLCA software, version 1.3.4: 2007 - 2013 GreenDelta. This study resulted in the conclusion that the biodiesel production process from WCO in particular is more environmentally sustainable as compared to the preparation of diesel from raw oil, also taking into account the combustion products that are released into the atmosphere as exhaust emissions.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.8
• /
• pp.1235-1243
• /
• 2020

The use of microalgal biomass as feedstock for biofuels has been discussed for decades as it provides a sustainable approach to producing fuels for the future. Nonetheless, its feasibility has not been established yet and various aspects of biomass applications such as CO₂ biofixation should also be explored. Therefore, in this study, the CO₂ biofixation and lipid/carbohydrate production potential of Chlorella sp. ABC-001 were examined under various nitrogen concentrations. The highest biomass productivity and CO₂ biofixation rate of 0.422 g/l/d and 0.683 g/l/d, respectively, were achieved under a nitrogen-rich condition (15 mM nitrate). Carbohydrate content was generally proportional to initial nitrate concentration and showed the highest value of 41.5% with 15 mM. However, lipid content showed an inverse relationship with nitrogen supplementation and showed the highest value of 47.4% with 2.5 mM. In consideration as feedstock for biofuels (bioethanol, biodiesel, and biogas), the sum of carbohydrate and lipid contents were examined and the highest value of 79.6% was achieved under low nitrogen condition (2.5 mM). For lipid-based biofuel production, low nitrogen supplementation should be pursued. However, considering the lower feasibility of biodiesel, pursuing CO₂ biofixation and the production of carbohydrate-based fuels under nitrogen-rich condition might be more rational. Thus, nitrogen status as a cultivation strategy must be optimized according to the objective, and this was confirmed with the promising alga Chlorella sp. ABC-001.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.299-312
• /
• 2008

The fat of Tra and Basa catfish (Mekong Delta, Viet Nam) was evaluated for the first time as the potential feedstock for biodiesel production, due to its abundance, availability and cheap cost. The unsaturated fatty acid contents of Tra and Basa fat were 57.97% and 64.17%, respectively. Biodiesel was prepared from Tra and Basa fat by methanolysis reaction using alkali catalysts like sodium hydroxide and potassium hydroxide. Effects of various process parameters on biodiesel production, such as molar ratio of methanol to fat, catalyst concentration, temperature and time were investigated. As those results, the transesterification can be performed under moderate conditions, and the biodiesel yields were shown more than 90%. KOH catalyst was the best catalyst for biodiesel production from both Basa and Tra fat. As the feedstock aspect, Basa fat was indicated more efficiency than that of Tra fat. The maximum yield could be achieved by the transesterification from Basa fat with 5:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 50 min. For Tra fat, the optimal condition were at 6:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 45 min. Nowadays, due to cheaper cost and abundance, Tra fat is a promised resource for cheap biodiesel production in Viet Nam.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.4
• /
• pp.57-63
• /
• 2008

The characteristics of the bio-oil produced by the pyrolysis process with pig feces was investigated in this paper. The continuous auger-type reactor produced bio-oil was maintained at the temperature range of 400 to $600^{\circ}C$, which was higher than a typical that in a conventional pyrolysis system. The pig feces was used as the feedstock. The bio-oil and its compositions were characterized by water analysis, heating values, elemental analysis, bio-oil compounds, by Gas Chromatography/Mass Spectrometry (GC/MS), and functional group by $^1H$ NMR spectroscopy. It was found that the maximum bio-oil yields of 21% w.t. was achieved at $550^{\circ}C$. This result suggested that this auger reactor might be a potential technology for livestock waste treatment to produce bio-oil because it is able to be improved to reach higher efficiency of bio-oil production in further study. The pyrolysis system reported herein had low heat transfer into the feedstock in the auger reactor so that it needs improve the heat conduction rate of the system in further study.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.29-35
• /
• 2017

BACKGROUND: This study was carried out to assess a biochemical methane potential of giant miscanthus (Miscanthus sacchariflorus) which was a promising candidate energy crop due to a high biomass productivity, in order to utilize as a feedstock for the biogas production. METHODSANDRESULTS: Giant miscanthus was sampled the elapsing drying time of 6 months after harvesting. TS (Total Solid) and VS (Volatile Solid) contents were 94.7 and 90.8%. And CP (Crude Protein), EE (Ether Extracts), and CF (Crude Fiber) contents of giant miscanthus were 1.4, 0.46, and 46.12%, respectively. In the organic composition of giant miscanthus, the NDF (Neutral Detergent Fiber) representing cellulose, lignin, and hemicellulose contents showed 86.88%, and the ADF (Acid Detergent Fiber) representing cellulose and lignin contents was 62.91%. Elemental composition of giant miscanthus showed 47.75%, 6.44%, 41.00%, and 0.28% for C, H, O, and N, respectively, and then, theoretical methane potential was obtained to $0.502Nm^3kg^{-1}-VS_{added}$. Biochemical methane potential was assessed as the range of $0.154{\sim}0.241Nm^3kg^{-1}-VS_{added}$ resulting the lower organic biodegradability of 30.7~48.0%. CONCLUSION: Therefore the development of pretreatment technology of the giant miscanthus was needed for the improvement of anaerobic digestability.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.90-97
• /
• 2006

Hydrogen is used as a chemical feedstock in several important industrial processes, including oil refineries and petro-chemical production. But, nowadays hydrogen is focused as energy carrier on the rising of problems such as exhaustion of fossil fuel and environmental pollution. Thermochemical hydrogen production by nuclear energy has potential to efficiently produce large quantities of hydrogen without producing greenhouse gases, and research of nuclear hydrogen, therefore, has been worked with goal to demonstrate commercial production in 2020. The oil refineries and petro-chemical plant are very large, centralized producers and users of industrial hydrogen, and high-potential early market for hydrogen produced by nuclear energy. Therefore, it is essential to investigate and analyze for state of domestic hydrogen market focused on industrial users. Hydrogen market of petro-chemical industry as demand site was investigated and worked for demand forecast of hydrogen in 2020. Also we suggested possible supply plans of nuclear hydrogen considered regional characteristics and then it can be provided basis for determination of optimal capacity of nuclear hydrogen plant in 2020.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

Microalgae is considered as one of environmentally sustainable and potential feedstocks to produce biodiesels. However, recent studies on life cycle assessments (LCA) of microalgal buidiesels have shown that energy requirement is not small to produce biodiesel from microalgae, especially during cultivation stage. The costs for carbon sources, nutrients like nitrogen or phosphorous, and water for cultivation can contribute up to 80% of the total medium costs. In the present article, recent trends on the utilization of several promising nutrient sources such as municipal wastewaters, organic fertilizers, combustion exhaust emissions and organic solid wastes were reviewed, and the potential strategies to be used as substitutes of artificial culture media, especially for the biodiesel production, were discussed.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.3
• /
• pp.375-381
• /
• 2013

A freshwater microalga, Chlamydomonas reinhardtii KNUA021, was characterized for its potential as a biochemical feedstock. Its optimal growth was observed when the culture was incubated at $25^{\circ}C$ and pH 9.4. However, the isolate was capable of survival and growth under a variety of temperatures (10-$30^{\circ}C$) and pH (pH 4.0-12.0) conditions. The total lipid content of the isolate was 21.7% of dry weight and it was found that a high-value fatty alcohol, hexadecenol ($C_{20}H_{40}O$), was autotrophically produced by strain KNUA021. In addition, a nutritionally important $C_{18:3}{\omega}3$ (${\alpha}$-linolenic acid, ALA) was also identified in this photosynthetic microorganism as one of the major fatty acids. Hence, C. reinhardtii KNUA021 appears to show promise for use in the production of microalgae-based biochemicals.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.117-126
• /
• 2019

Activated carbon is carbon produced from carbonaceous source materials, such as coconut shells, coals, and woods. In this study, an activated carbon production system was analyzed by carbonization and activation in terms of environmental impact and human health. The feedstock of wood wastes for the system reduced fossil fuel consumption and disposal costs. Life cycle assessment methodology was used to analyze the environmental impacts of the system, and the functional unit was one tonne of wood wastes. The boundary expansion method was applied to analyze the wood waste recycling process for activated carbon production. An environmental credit was quantified by avoided impact analysis. Specifically, greenhouse gases discharged from 1 kg of activated carbon production system by feeding wood wastes were evaluated. We found that this system reduced global warming potential of approximately $9.69E+00kg\;CO_2-eq$. compared to the process using coals. The environmental benefits for activated carbon production from wood wastes were analyzed in contrast to other disposal methods. The results showed that the activated carbon system using one tonne of wood wastes has an environmental benefit of $163kg\;CO_2-eq$. for reducing global warming potential in comparison with the same amount of wood wastes disposal by landfilling.