• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1241-1248
• /
• 1998

$\beta$-C2S and C4A3 were synthesized separately and potassium oxalate was added to each system. The ad-ditive caused calcium ions in solution to decrease at early time in hydration and promoted hydration reac-tion. And then clinker which is mainly composed of $\beta$-C2S and C4A3 was synthesized at 130$0^{\circ}C$ After ad-ding potassium oxalate to it behavior of hydration was observed. It showed that the additive promoted et-tringtie formation at early time and C-S-H formation as time went on.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.216-225
• /
• 1991

The purpose of this study was to evaluate the desensitizing effect of potassium oxalate(Group I), sodium fluoride (Group II), and control group (Group III). The 120 teeth of 26 patients who had been complained dentinal hypersensitivity were divided into three groups by applicating agent. The observation was done before and immediately after treatment. The data were statistically analyzed and the results were as followed. 1. Potassium oxalate showed the best desensitizing effect to the stimuli, followed by sodium fluoride, control group, and there was a significant difference (p<0.05) in desensitizing effect among the groups. 2. Potassium oxalate showed the best desensitizing effect to the stimuli, followed by sodium fluride, control group on both cervical abrasion and gingival recession, and there was a significant difference (p<0.05) in desensitizing effect among the groups on both cervical abrasion and gingival recession. 3. There was no significant difference (p<0.05) in effect of the desensitization between cervical abrasion and gingival recession. 4. The scratch and air blast I were more effective in desensitiziation than other stimuli with significant difference (p<0.05). In view of the results mentioned above, it can be conceived that potassium oxalate is more effective than sodium fluoride on the reduction of dentinal hypersensitivity.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권6호
• /
• pp.719-723
• /
• 2010

Ingestion of forage containing a large quantity of soluble oxalate can result in calcium deficiency and even death of livestock. Fertilization is one of the most practical and effective ways to improve yield and nutritional quality of forage. An experiment was conducted to determine the effects of nitrogen (N) fertilization (150, 300 and 600 kg/ha) across varying levels (150, 300 and 600 kg/ha) of potassium (K) on oxalate accumulation in napiergrass (Pennisetum purpureum). Application of N at 300 kg/ha produced higher dry matter yield than at 150 or 600 kg/ha, while K fertilization had no effect on yield. In general, N fertilization did not affect the soluble and total oxalate contents, but slightly affected the insoluble oxalate content. Soluble oxalate content showed an increasing trend and insoluble oxalate content showed a decreasing trend with increasing K level, but total oxalate content remained relatively constant. There were significant interactions between N and K fertilization for the content of soluble and insoluble oxalate fractions. The greatest increase in soluble oxalate content with N level at 300 kg/ha was found at the high level (600 kg/ha) of K application. The greatest increase in insoluble oxalate content with N level at 600 kg/ha was found at the low level (150 kg/ha) of K application. These results indicated the possibility of controlling the content of soluble and insoluble oxalate fractions in forage by fertilization.

• 한국연초학회지
• /
• 제17권1호
• /
• pp.62-67
• /
• 1995

Deliveries of tar, nicotine and carbon monoxide in mainstream smoke decreased with increment of exogenous potassium content of tobacco. Potassium malate was more effective than potassium nitrate, potassium carbonate, potassium citrate and potassium oxalate for the reduction of carbon monoxide, but potassium nitrate was more effective than potassium palate, potassium carbonat, potassium citrate and potassium oxalate for the reduction of carbon in the case of nicotine. Puff count and burning rate were slightly changed with added potassium salts.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권3호
• /
• pp.439-448
• /
• 2011

Oxalic acid is synthesized by a wide range of plants. A few of them are forage plants that can cause oxalate poisoning in ruminants under certain conditions. In this paper, the role of some agronomic, climatic and genetic factors in minimizing oxalate accumulation in forage plants has been discussed. Research indicates that the content of oxalate in forage can be controlled by fertilizer application. For example, nitrate application resulted in higher contents of soluble and insoluble oxalates than ammonium application. With an increased rate of potassium application, soluble oxalate content showed an increasing trend and insoluble oxalate content showed a decreasing trend. With an increased rate of calcium application, soluble oxalate content showed a decreasing trend and insoluble oxalate content showed a reverse trend. Other agronomic factors such as growing season, harvesting practices, plant maturity, plant species, plant variety and plant parts can also have a large effect on oxalate accumulation. However, the potential benefits of the above approaches for improving forage quality have not been fully exploited. In addition, there is still insufficient information to fully utilize means (e.g. plant nutrients, season and soil moisture) to minimize oxalate accumulation in forage plants. Therefore, more research is required for a better understanding of the interactions between oxalate and the above-mentioned factors in forage plants.

• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.181-194
• /
• 1994

The purpose of this study was to compare the retention and fitness of crown treated with various desensitizing agents on natural teeth. Varnish, dentin primer, bonding agent and potassium oxalate treated groups and control group with no treatment were used. The retention test was executed with the Instron test machine(Instron Co.,U.S.A.) on 24 hours after cementation with zinc phosphate cement. After retention test, the teeth and crowns were washed and recemented. The cemented crowns were embedded in clear resin and sectioned with a diamond saw. The occlusal and marginal fitnesses, were measured indirectly with a stereomicroscopic photographs. The result of this study were obtained as follows : 1. The retention of control group was higher than any other desensitizing agent treated group. 2. The differences of retention among varnish, dentin primer, bonding agent and potassium oxalate treated groups were not statistically significant. 3. There were no statistically significant difference in fitness at occlusal surface and margin among control, varnish, dentin primer, bonding agent and potassium oxalate treated groups. According to these results, desensitizing agents used to protect the pulp from irritation of luting agents may adversely affect the retention of castings. Therefore, desensitizing agents should be used in limited areas carefully.

• Journal of Periodontal and Implant Science
• /
• 제29권1호
• /
• pp.51-63
• /
• 1999

Exposure of the root surface due to gingival recession after periodontal surgery, elicit pain response when exposed to mechanical, heat, chemical or osmotic irritation. Especially patients treated with periodontal surgery, show high frequency. There have been reports that the 1 out of 7 patients complains of dentinal hypersensitivity. There have been many studies on the clinical effects of various materials on the treatment of dentinal hypersensitivity. The purposes of this study were to evaluate the effect of sodium chloride and potassium oxalate and to observe the relationship between the dentinal hypersensitivity and surface characteristics such as dentinal tubule size and number. This study included 20 teeth which were scheduled for extraction and had no pulpal disease. These teeth were divided into Root planing group, EDTA group, NaCl group and Oxalate group. Dentinal hypersensitivity is measured by tactile, pressured air and cold water using NRS (Numerical Rating Scales). Teeth were extracted under local anesthesia and each specimen was sectioned to a size about 3 X 5 mm and was examined under the scanning electron microscope (X2,000) The results were as follows, 1. The EDTA group exhibited significantly increased dentinal hypersensitivity comparing with the other groups. 2. The NaCl and Oxalate groups showed significantly reduced dentinal hypersensitivity comparing with the EDTA group. 3. As a method for dentinal hypersensitivity measurement, it was presumed thet tactile sensitivity test was not sensitive method but air blast test and cold water test were adequate method. 4. In a SEM study, the root planing group exhibited amorphous smear layer and showed no dentinal tubule orifice, but the EDTA group showed the large number of dentinal tubules. On the other hand, the NaCl and Oxalate groups did not show exposed dentinal tubules. The NaCl group showed more rough root surface than the EDTA group, and the Oxalate group showed many participates to be presumed as calcium oxalate particle. As the results from this study, root planing couldn't expose the dentinal tubule and NaCl and potassium oxalate occluded exposed dentinal tubule effectively. Dentinal hypersensitivity has close relationship with the exposure of dentinal tubules, especially with it's size and number.

• 시멘트 심포지엄
• /
• 24호
• /
• pp.111-114
• /
• 1996

• 한국식품영양과학회지
• /
• 제38권7호
• /
• pp.870-878
• /
• 2009

본 연구는 국산 113종 콩 장려품종의 total oxalate(Ox), phytate($InsP_6$)와 calcium(Ca), magnesium(Mg), sodium (Na), zinc(Zn), potassium(K)을 분석하여 옥살산칼슘 결정생성을 최소화할 수 있는 품종의 선발 및 안전한 콩 가공식품 제조를 위한 자료를 제시하고자 하였다. 113종의 콩 장려품종에서 Ca과 Mg 함량 분포는 각각 $0.586{\sim}3.177$과 $0.559{\sim}3.085\;mg/g$이었으며, Ca는 다올콩은 3.177 mg/g으로 가장 높았고, Mg는 선흑콩은 3.085 mg/g으로 가장 높은 함량을 보였다. Ca과 Mg 사이에서 품종간 유의적인 차이가 나타나지 않았다. Ox와 InsP6 함량 분포는 각각 1.24(선흑콩)$\sim$3.81(다원콩)과 0.43(만리콩)$\sim$4.72(다기콩) mg/g 범위이었고, 옥살산칼슘 결정의 저해물질인 $InsP_6$의 함량이 Ox의 함량보다 상대적으로 높은 함량 분포로 존재하였다. 또한 Ca, Mg, Ox 및 $InsP_6$ 함량 사이의 교차상관관계분석을 통해 Ca과 $InsP_6$ 함량이 Ox 함량보다 높은 선흑콩과 단미2가 옥살산칼슘 생성의 잠재적 위험성을 최소화할 수 있는 품종으로 판단되었다.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.45-63
• /
• 1994

128 freshly extracted human molars were used to study the interaction between dentinal smear layer removal with various agents, and the shear bond strength of a light cured glass ionomer cement to dentin. It was proposed that the removal of smear layers using acidic cleaners followed by incorporation of Fe mordant with dentin could enhanced the infiltration of monomer component in light curing glass ionomer cement and resulted in a high bond strength. For the first treatment process for removal of smear layers on the surfaces of dentin, 50 % citric acid, 10% maleic acid and 10 % phosphoric acid were used, and for the second treatment process, 15% ferric chloride, 6.8% ferric oxalate or 30% potassium oxalate were used. Distilled water was used as a control. After double sequential treatment on dentin, a light curing glass ionomer cement was bonded to dentin. After being immersed in water at 31'C for 24 hours, shear bond strengths were measured Instron testing machine(Model No.4202, USA). Surface changes were also observed using SEM (Hitachi, S-2300, Japan) after treatment process with each agents. The following conclusions were drawn : 1. Dentin surface cleaned with maleic acid and treated with ferric oxalate showed the highest bond strength with light curing glass ionomer cement. 2. Bond strengths of glass ionomer cement to dentin treated with maleic acid or citric acid were the highest, and that treated with phosphoric acid showed the lowest. 3. The effect of ferric oxalate on shear bond strength to dentin was always higher than that of ferric chloride. 4. The smear layers were clearly removed and the orifices of dentinal tubules were opened widely by the citric acid, maleic acid and phosphoric acid. 5. The orifices of dentinal tubules opened after using the first solution were closed with the treatment of ferric chloride. 6. The precipitate like crystals were formed on dentin surfaces and tubules, but a significant decrease in bond strength of glass ionomer cement to dentin surface treated with potassium oxalate.