• Title/Summary/Keyword: potassium cyanide

Search Result 52, Processing Time 0.019 seconds

A Study on the Feasibility of a Cyanide-Free Silver Plating Bath (비시안 은도금욕의 가능성에 관한 연구)

  • 이상화
    • Journal of the Korean institute of surface engineering
    • /
    • v.29 no.2
    • /
    • pp.140-145
    • /
    • 1996
  • Silver deposits formed on copper substrates by replacement reactions show poor adhesion, and a silver film plated on such a deposit does not adhere. Silver ion makes a highly stable complex with cyanide ion, so that in a silver cyanide solution, the activity of silver ion is very small. This is one of the reasons for the universal use of cyanide baths in the industrial silver plating. However, the consideration of the difference between the values of the stability constants for bath the silver-iodide complex and the copper-iodide complex suggest that the rate of replacement deposition of silver on the copper substrate in si]ver-potassium iodide solution, could be comparatively low. To confirm this, the rate of replacement deposition of silver in both a silver-potassium iodide solution ($AgNO_3$0.10 mol/L, KI 2.00 mol/L ) and a strike silver plating bath (AgCN 0.028 mol/L, KCN 1.15 mol/L ) was estimated from the current density corresponding to the point of intersection of the anodic and the cathodic polarization curves. These estimated values were almost the same, and it is suggested that the silver-potassium iodide solution is not only a cyanide free silver plating bath capable of employing a copper substrate but a silver plating bath which requires no strike plating.

  • PDF

The Effect of Potassium Cyanide on Serum Protein of Snake Head, Ophicephalus argus (CANTOR) (가물치 (Ophicephalus argus CANTOR)의 혈청단백질에 미치는 potassium cyanide의 영향)

  • 이용억;남상열
    • The Korean Journal of Zoology
    • /
    • v.6 no.2
    • /
    • pp.6-10
    • /
    • 1963
  • 가물치( Ophicephalus argus CANTOR) 2 년생(168$\pm$4g)107마리를 대조군과 실험적으로 나누고 실험군에는 일시에 2.9mg/kg 체동의 potassium cyanide을 배근에 직접 주사하였다. 약물 처리후 시간의 경과에 따라 나타나는 Albumin/Blbulin(A/G)비, 총혈청단백질량, hematocrit 비 및 간장 및 신장의 중량변화를 측정하였다. 약물 처리 직후는 A/G 비 , 총혈청단백질량 및 hematocrit 비는 각각 현저하게 감소되었으나 많은 시간이 경과함에 따라 점차 증가되어 228시간이후는 거의 대조군과 그것과 가까운 결과를 얻었다. 그러나 간장과 신장의 중량은 약물 처리 직후는 오히려 약간 증가되는 상태였으나 , 48시간이후 급히 감소되었다가 점차 역시 대조군과 가까운 결과를 나타냈다. 이상의 결과로서 KCN가 어류의 호흡 억제작용뿐만 아니라 단백질대사에도 영향을 미치는 것으로 생각된다.

  • PDF

Kinetic Studies on the Addition of Potassium Cyanide to α,N-Diphenylnitrone

  • 김태린;김영호;변상용
    • Bulletin of the Korean Chemical Society
    • /
    • v.20 no.6
    • /
    • pp.712-714
    • /
    • 1999
  • The rate constants for the nucleophilic addition of potassium cyanide to α,N-diphenylnitrone and its derivatives (p-OCH3, p-CH3, p-Cl, and p-NO2) were determined by ultraviolet spectrophotometer at 25℃, and the rate equations which can be applied over a wide pH range were obtained. On the basis of pH-rate profile, adduct analysis, general base catalysis and substituent effect, a plausible mechanism of this addition reaction was proposed: At high pH, the cyanide ion to carbon-nitrogen double bond was rate controlling, however, in acidic media, the reaction proceeded by the addition of hydrogen cyanide molecule to carbon-nitrogen double bond after protonation at oxygen of a,N-diphenylnitrone. In the range of neutral pH, these two reactions occured competitively.

Studies on the Browning of Ixeris sonchifolia (고들빼기의 갈변에 관한 연구)

  • Park, Soo-Sun;Kim, An-Keun
    • Korean Journal of Pharmacognosy
    • /
    • v.15 no.2
    • /
    • pp.78-84
    • /
    • 1984
  • Polyphenol oxidase was purified from acetone powder extract of the root of Ixeris sonchifolia. The enzyme obtained by ammonium sulfate fractionation and sephadex G-200 gelfiltration gave 51-fold purification over the crude extract. The purified enzyme showed activity toward chlorogenic acid, caffeic acid and pyrocatechol. The kinetics of thermal inactivation of the enzyme followed first-order reaction. Potassium cyanide and cysteine were potent inhibitors.

  • PDF

Effect of addition of Tl+ and Pd2+ on the texture and hardness of the non-cyanide gold plating layer (논시안 금도금층의 조직과 경도에 미치는 Tl+ 과 Pd2+ 이온첨가의 영향)

  • Heo, Wonyoung;Son, Injoon
    • Journal of the Korean institute of surface engineering
    • /
    • v.55 no.6
    • /
    • pp.460-468
    • /
    • 2022
  • Due to its high electrical conductivity, low contact resistance, good weldability and high corrosion resi-stance, gold is widely used in electronic components such as connectors and printed circuit boards (PCB). Gold ion salts currently used in gold plating are largely cyan-based salts and non-cyanic salts. The cya-nide bath can be used for both high and low hardness, but the non-cyanide bath can be used for low hardness plating. Potassium gold cyanide (KAu(CN)2) as a cyanide type and sodium gold sulfite (Na3[Au(SO)3]2) salt as a non-cyanide type are most widely used. Although the cyan bath has excellent performance in plating, potassium gold cyanide (KAu(CN)2) used in the cyan bath is classified as a poison and a toxic substance and has strong toxicity, which tends to damage the positive photoresist film and make it difficult to form a straight side-wall. There is a need to supplement this. Therefore, it is intended to supplement this with an eco-friendly process using sodium sulfite sodium salt that does not contain cyan. Therefore, the main goal is to form a gold plating layer with a controllable hardness using a non-cyanide gold plating solution. In this study, the composition of a non-cyanide gold plating solution that maintains hardness even after annealing is generated through gold-palladium alloying by adding thallium, a crystal regulator among electrolysis factors affecting the structure and hardness, and changes in plating layer structure and crystallinity before and after annealing the correlation with the hardness.

Effect of Oxygen on the Antidotal Action of Thiosulfate in Cyanide Poisoning (시안화물중독(化物中毒)에 있어서 Thiosulfate 해독효과에 미치는 산소(酸素)의 영향(影響))

  • Yoo, Keun-Young
    • Journal of Preventive Medicine and Public Health
    • /
    • v.15 no.1
    • /
    • pp.161-166
    • /
    • 1982
  • Cyanide poisoning is expected to be antagonized by the administration of oxygen, when it is administered in combination with the conventional cyanide antidote, sodium thiosulfate. However, the antidotal efficacy and its exact mechanism of oxygen in cyanide poisoning is still a controversial one. To test the effect of oxygen on the antidotal action of thiosulfate in cyanide poisoning, author designed this study on the dose-mortality patterns for potassium cyanide in mice. Potency ratios derived from $LD_{50}$ values were compared in groups of mice treated with sodium thiosulfate alone and sodium thiosulfate with oxygen. These results indicated that oxygen enhances the antidotal effect of sodium thiosulfate, effectively. This fact demonstrates that oxygen is of importance in the treatment of cyanide poisoning.

  • PDF

ELIMINATION PATTERNS OF ARTERIAL BLOOD CYANIDE ION IN THIOSULFATE-OXYGEN ADMINISTERED RABBIT

  • Yoo, Keun-Young;Lee, Yoon-Seong;Yun, Dork-Ro
    • Toxicological Research
    • /
    • v.3 no.2
    • /
    • pp.89-96
    • /
    • 1987
  • To test the efficacies of thiosulfate in cyanide poisoning with or without oxygen, after the administration of sublethal dose of potassium cyanide, serial arterial blood samples were collected during 60 minutes in 15 rabbits. Cyanide ion concentrations were measured by Conway cell microdiffusion method, and arterial oxygen tensions were also observed. Comparison of elimination constants showed that arterial blood cyanide ion concentration decreased most rapidly in the thiosulfate with oxygen-administered group. The elimination of cyanide ion by the action of thiosulfate in acutely poisoned rabbit accelerated probably due to oxygen and elimination pattern seems to occur by first-order elimination kinetics.

  • PDF

Purification and some properties of polyphenol oxidase from Spuriopimpinella bracycarpa (참나물로부터 추출한 polyphenol oxidase의 부분정제 및 성질)

  • Ham, Seung-Shi;Hong, Eun-Hee;Lee, Sang-Young;Park, Gwi-Gun;Omura, Hirohisa
    • Applied Biological Chemistry
    • /
    • v.34 no.1
    • /
    • pp.49-53
    • /
    • 1991
  • Three polyphenol oxidase(polyphenol oxidase I, II and III ) were isolated from the crude extract of a Spuriopimpinella bracycarpa by $(NH_4)_2SO_4$ precipitation and subsequent Sephadex G-150 chromatography. The final preparation thus obtained showed three peaks of enzyme activity. Optimum pH and temperature for the activity of polyphenol oxidase were 7.5 and $30^{\circ}C$, respectively. The enzyme was completely inactivated when i4 was treated at$70^{\circ}C$ for 30min and at $80^{\circ}C$ for 5min at pH 6.5. The enzyme was partially inactivated by ascorbic acid, glutathione and potassium cyanide (0.1mM), and was completely inhibited by L-cysteine, ascorbic acid, glutathione and potassium cyanide(0.5 and 1.0mM). The enzyme has good activity on catechol and 3,4-dihydroxytoluene but was strongly inactivated on pyrogallol, dopamine and DL-dopa. The Michaelis cons4ant of the enzyme was 86.5mM with catechol as a substrate.

  • PDF

Etchant for Dissolving Thin Layer of Ag-Cu-Au Alloy

  • Utaka, Kojun;Komatsu, Toshio;Nagano, Hiroo
    • Corrosion Science and Technology
    • /
    • v.6 no.6
    • /
    • pp.304-307
    • /
    • 2007
  • As to the reflection electrode of LCD (liquid crystal displays), silver-copper-gold alloy (hereafter, it is called as ACA (Ag98%, Cu1%, Au1%)) is an effective material of which weathering resistance can be improved more compared with pure silver. However, there is a problem that gold remains on the substrate as residues when ACA is etched in cerium ammonium nitrate solution or phosphoric acid. Gold can not be etched in these etchants as readily as the other two alloying elements. Gold residue has actually been removed physically by brushing etc. This procedure causes damage to the display elements. Another etchant of iodine/potassium iodide generally known as one of the gold etchants can not give precise etch pattern because of remarkable difference in etching rates among silver, copper and gold. The purpose of this research is to obtain a practical etchant for ACA alloy. The results are as follows. The cyanogen complex salt of gold generates when cyanide is used as the etchant, in which gold dissolves considerably. Oxygen reduction is important as the cathodic reaction in the dissolution of gold. A new etchant of sodium cyanide / potassium ferricyanide whose cathodic reduction is stronger than oxygen, can give precise etch patterns in ACA alloy swiftly at room temperature.

Cyanide removal simulation from wastewater in the presence of titanium dioxide nanoparticles

  • Safavi, Banafshe;Asadollahfardi, Gholamreza;Darban, Ahmad khodadadi
    • Advances in nano research
    • /
    • v.5 no.1
    • /
    • pp.27-34
    • /
    • 2017
  • One of the methods of removing cyanide from wastewater is surface adsorption. We simulated the removal of cyanide from a synthetic wastewater in the presence of Titanium dioxide nano-particles absorbent uses VISUAL MINTEQ 3.1 software. Our aim was to determine the factors affecting the adsorption of cyanide from synthetic wastewater applying simulation. Synthetic wastewater with a concentration of 100 mg/l of potassium cyanide was used for simulation. The amount of titanium dioxide was 1 g/l under the temperature of $25^{\circ}C$. The simulation was performed using an adsorption model of Freundlich and constant capacitance model. The results of simulation indicated that three factors including pH, nanoparticles of titanium dioxide and the primary concentration of cyanide affect the adsorption level of cyanide. The simulation and experimental results had a good agreement. Also by increasing the pH level of adsorption increases 11 units and then almost did not change. An increase in cyanide concentration, the adsorption level was decreased. In simulation process, rising the concentrations of titanium dioxide nanoparticles to 1 g/l, the rate of adsorption was increased and afterward no any change was observed. In all cases, the coefficient of determination between the experimental data and simulation data was above 0.9.