• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.223-238
• /
• 1991

This study was carried out in order to findout the amount of tooth movement, the changes arch size and the changes in arch morphology following orthodontic treatment and to provide a guideline for to predict post-treatment arch morphology. The sample group for this study consists of 15 males and 22 females, totalling in 37 persons, who received orthodontic treatment at Orthodontic Department of Dankook Univ. Dental Hospital. They are classified into Extraction Class I treatment group (E I), Non-extraction Class I treatment group (N I), and Non-extraction Class III treatment group (N III), according to their pre-treatment malocclusion state and methods of treatment. Following conclusions and averaged dental arch form for each group were obtained by cephalometric linear measurements and dental arch measurements using pre- and post-treatment lateral cephalograms and plaster study models. 1. Intercanine width were reduced in max. of both EI and NI during the period of treatment, 2. Intermolar width were reduced in max. of EI and increased in max. of NI. Therefore although there was no difference between these two groups before the treatment, intermolar width of the max, of NI was wider than that of E1 after the treatment. 3. PMV-incisor distance and PMV-canine distance were decreased in both max. and mand. of EI and that of NI, during the period of treatment. PMV-molar distance was decreased in both max. and mand. of NI and in mand. of NIII. 4. Items that showed stability during the treatment were: max. & mand. PMV-molar distance, mand. intercanine and intermolar width in EI; mand. intercanine and intermolar width in NI; mand. & max. PMV-incisor distance, PMV-canine distance, max. PMV-molar distance and max. & mand. intercanine and intermolar width in NIII. 5. The differences in averaged canine and molar variances to post-treatment dental arch form were present only in EI and in NI. There was no variance between maxilla and mandible in each group.

• The Korean Journal of Pain
• /
• 제32권1호
• /
• pp.55-56
• /
• 2019

• Restorative Dentistry and Endodontics
• /
• 제31권2호
• /
• pp.86-95
• /
• 2006

본 연구는 치성 동통을 보이는 치아의 수산화칼슘의 사용 여부에 따른 동통 감소 효과를 판단하고자 시행하였다. 2003년 12월부터 2004년 9월 사이에 경희대학교 치과대학 부속 치과병원 치과보존과에 치성 동통으로 내원한 환자 213명으로부터 근관형성을 시행한 237개의 치아를 대상으로 환자의 성별 및 연령 치료부위, 재근관 치료의 여부, 치수의 상태, 술전 치아 상태와 술전 동통의 정도를 기록하였다. 수산화칼슘을 적용하지 않은 군 (1군)과 수산화칼슘을 적용한 군 (2군)으로 분류하였다. 환자들에게 설문지를 배분하여 다음 내원시 치료 후4시간, 2일 및 7일에 술후 동통의 발생 여부와 동통의 정도를 기록하도록 하였다. 수집한 자료들은 Chi-square analysis (p < 0.05)를 사용하여 비교, 분석한 결과 근관내 약제로써 수산화칼슘은 술후 동통을 예방하거나 감소시키는 효과를 가지고 있지 않다는 것을 알 수 있었다.

• 대한치과재료학회지
• /
• 제42권2호
• /
• pp.95-106
• /
• 2015

Hardening mechanism associated with post-firing heat treatment of softening heat treated and then firing simulated Pd-Ag-Au alloy for bonding porcelain was examined by observing the change in hardness, crystal structure and microstructure. By post-firing heat treatment of as-cast, solution treated and pre-firing heat treated specimens at $650^{\circ}C$ after casting, the hardness value increased within 10 minutes. Then, hardness consistently increased until 30 minutes, and gap of hardness value among the specimens was reduced. The increase in hardness after post-firing heat treatment was caused by grain interior precipitation in the matrix. The softening heat treatment did not affect the increase in hardness by post-firing heat treatment. The precipitated phase from the parent Pd-Ag-Au-rich ${\alpha}$ phase with face-centered cubic structure by post-firing heat treatment was $Pd_3$(Sn, In) phase with face-centered tetragonal structure, which has lattice parameters of $a_{200}=4.0907{\AA}$, $c_{002}=3.745{\AA}$. From above results, appropriate post-firing heat treatment in order to support the hardness of Pd-Ag-Au metal substructure was expected to bring positive effects to durability of the prosthesis.

• The Journal of Advanced Prosthodontics
• /
• 제4권2호
• /
• pp.103-108
• /
• 2012

PURPOSE. Debonding of a composite resin core of the fiber post often occurs at the interface between these two materials. The aim of this study was to evaluate the effects of different surface treatment methods on bond strength between fiber posts and composite core. MATERIALS AND METHODS. Sixty-four fiber posts were picked in two groups (Hetco and Exacto). Each group was further divided into four subgroups using different surface treatments: 1) silanization; 2) sandblasting; 3) Treatment with 24% $H_2O_2$, and 4) no treatment (control group). A cylindrical plexiglass matrix was placed around the post and filled with the core resin composite. Specimens were stored in 5000 thermal cycles between $5^{\circ}C$ and $55^{\circ}C$. Tensile bond strength (TBS) test and evaluation using stereomicroscope were performed on the specimen and the data were analyzed using two-way ANOVA, Post Hoc Scheffe tests and Fisher's Exact Test (${\alpha}$=.05). RESULTS. There was a significant difference between the effect of different surface treatments on TBS ($P$ <.001) but different brands of post ($P$=.743) and interaction between the brand of post and surface treatment ($P$=.922) had no significant effect on TBS. Both silanization and sandblasting improved the bonding strength of fiber posts to composite resin core, but there were not any significant differences between these groups and control group. CONCLUSION. There was not any significant difference between two brands of fiber posts that had been used in this study. Although silanization and sandblasting can improve the TBS, there was not any significant differences between surface treatments used.

• Journal of Magnetics
• /
• 제15권4호
• /
• pp.179-184
• /
• 2010

We have investigated the effects of post annealing on iron oxide nanoparticles synthesized by the novel hydrothermal synthesis method with the $FeSO_4{\cdot}7H_2O$. To investigate the post annealing effect, the as-synthesized iron oxide nanoparticles were annealed at different temperatures in a vacuum chamber. The morphological, structural and magnetic properties of the iron oxide nanoparticles were investigated with high resolution X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Mossbauer spectroscopy, and vibrating sample magnetometer analysis. According to the XRD and HRTEM analysis results, as-synthesized iron oxide nanoparticles were only magnetite ($Fe_3O_4$) phase with face-centered cubic structure but post annealed iron oxide nanoparticles at $700^{\circ}C$ were mainly magnetite phase with trivial maghemite ($\gamma-Fe_2O_3$) phase which was induced in the post annealing treatment. The crystallinity of the iron oxide nanoparticles is enhanced by the post annealing treatment. The particle size of the as-synthesized iron oxide nanoparticles was about 5 nm and the particle shape was almost spherical. But the particle size of the post annealed iron oxide nanoparticles at $700^{\circ}C$ was around 25 nm and the particle shape was spherical and irregular. The as-synthesized iron oxide nanoparticles showed superparamagnetic behavior, but post annealed iron oxide nanoparticles at $700^{\circ}C$ did not show superparamagnetic behavior due to the increase of particle size by post annealing treatment. The saturation of magnetization of the as-synthesized nanoparticles, post annealed nanoparticles at $500^{\circ}C$, and post annealed nanoparticles at $700^{\circ}C$ was found to be 3.7 emu/g, 6.1 emu/g, and 7.5 emu/g, respectively. The much smaller saturation magnetization value than one of bulk magnetite can be attributed to spin disorder and/or spin canting, spin pinning at the nanoparticle surface.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.61-65
• /
• 1999

Because of the need for packages which accommodate high pin count, high density and high speed device, PBGA(plastic ball grid array) package gets more spotlight. But the substrate material which is used for PBGA package is in nature susceptible to moisture penetration. The objective of the study is to find out the path of delamination in the stacked structure of substrate. To increase the adhesion between the cooper laminate and PSR(photo solder resist) which is the weakest part, experiments were performed by changing parameters of printing pre-treatment and post-treatment process. As a result of experiments, the factor effects on the adhesion between the cooper laminate and PSR is caused by all of the pre-treatment and post-treatment condition. A considerable change was observed depending on the amount of UV irradiation after thermal cure which is typical of printing post-treatment condition rather than pre-treatment condition.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.347.1-347.1
• /
• 2014

최근, 박막 트랜지스터는 빠른 동작 속도, 낮은 공정비용 그리고 저온공정 등의 특성을 필요로 하고 있다. 그 중 indium-zinc oxide (InZnO)는 높은 전기적 특성, 높은 광 투과도 그리고 우수한 안정성 때문에 기존의 반도체를 대체할 수 있을 것으로 기대된다. InZnO의 경우 indium과 zinc의 조성비에 따라 특성 변화의 차이가 크기 때문에 다양한 조성비에 대한 연구가 보고되고 있는데, 기존의 InZnO 박막을 증착하는 방법의 경우에 조성비의 변화 과정에 많은 공정상의 어려움이 있다. 이 같은 문제점 때문에 조성비의 변화를 용이하게 할 수 있는 용액공정을 이용한 연구가 진행되고 있다. 또한 용액공정은 높은 균일성, 공정 시간 및 비용 감소 그리고 대면적화가 가능한 장점을 가지고 있다. 한편, 용액공정을 기반으로 한 InZnO의 경우에 용액 상태에서 고체 상태의 순수한 금속 산화물 상태로 바꾸기 위해 post-treatment 가 필요하다. 일반적으로 furnace 열처리 방법을 사용하는데, 이 경우 낮은 열효율 및 고비용 등의 문제점을 가지고 있다. 특히 glass 또는 flexible 기판의 경우 열처리 온도에 대한 제약이 있다. 이러한 문제를 해결하기 위한 방법으로 최근에 microwave irradiation를 이용한 저온 post-treatment 방법이 보고되고 있다. Microwave irradiation는 짧은 공정시간 및 열 균일성 등의 장점이 있다. 따라서 본 연구에서는 다양한 indium과 zinc의 조성비를 갖는 용액을 제작한 후 spin coating을 이용하여 증착한 InZnO 기반의 박막 트랜지스터를 제작하였다. Furnace와 microwave 방식으로 post-treatment 하여 비교 평가한 결과 microwave irradiation 한 경우 furnace 열처리 한 경우 보다 더 안정된 동작 전압을 가지는 것으로 나타났다. 따라서 저온공정이 가능한 microwave irradiation 방법으로 post-treatment 한다면 차세대 산화물 반도체로서의 적용이 가능할 것으로 기대된다.

• Advances in Traditional Medicine
• /
• 제10권2호
• /
• pp.90-102
• /
• 2010

Effect of ethanol (ASE) and water (ASW) extracts of Argyreia speciosa on blood glucose and lipid profile was investigated in normoglycemic and Streptozotocin (STZ)-induced diabetic animals. In oral glucose and sucrose tolerance test, treatment with ASE and ASW (100 and 200 mg/kg) and Glidenclamide (10 mg/kg) significantly improved the glucose and sucrose tolerance in normal animals. In addition, respective treatment for fifteen-day resulted in significant percentage reduction in serum glucose (SG) ie., 30.39% (lower dose of ASE) and 33.21% (higher dose of ASW). In standardized STZ (50 mg/kg, iv)-induced diabetic rats, a single dose of ASE and ASW treatment exhibited reduction in SG levels at different time intervals compared to basal levels. Administration of both the doses of ASE and ASW for fifteen-day days exhibited greater percentage reduction in glycemia (24.6%, 24.7%, 23.9% and 21.9% respectively) and also ameliorated restored to near normal value of all tested lipid parameters. Further, treatment also exhibited significantly improved glucose tolerance over the period of 120 min compared to diabetic control group. Eventhough treatment failed to increase serum insulin levels significantly but peripheral utilization of insulin was increased as evident by insulin tolerance test. Taken together, present study supports the traditional usage of title plant in the treatment of diabetes mellitus.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.734-740
• /
• 2016

The micron-sized indium zinc tin oxide (IZTO) particles were prepared by spray pyrolysis from aqueous precursor solution for indium, zinc, and tin and organic additives such as citric acid (CA) and ethylene glycol (EG) were added to aqueous precursor solution for indium, zinc, and tin. The obtained IZTO particles prepared by spray pyrolysis from the aqueous solution without organic additives had spherical and filled morphologies, whereas the IZTO particles obtained with organic additives had more hollow and porous morphologies. The micron-sized IZTO particles with organic additives were changed fully to nano-sized IZTO particles, whereas the micron-sized IZTO particles without organic additives were not changed fully to nano-sized IZTO particle after post-treatment at $700^{\circ}C$ for 2 hours and wet-ball milling for 24 hours. Surface resistances of micron-sized IZTO's before post-heat treatment and wet-ball milling were much higher than those of nano-sized IZTO's after post-heat treatment and wet-ball milling. From IZTO with composition of 80 wt. % $In_2O_3$, 10 wt. % ZnO, and 10 wt. % $SnO_2$ which showed a smallest surface resistance IZTO after post-heat treatment and wet-ball milling, thin films were deposited on glass substrates by pulsed DC magnetron sputtering, and the electrical and optical properties were investigated.