• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.19-21
• /
• 2010

In this study, regarding to the generalization of the map, we analyze how the different tolerances influence on the performances of linear generalization operators. For the analysis, we apply the generalization operators, especially two simplification algorithms provided in the commercial GIS software, to 1:1000 digital topographic map for analyzing the aspect of the changes in positional error depending on the tolerances. And we evaluate the changes in positional error with the quantitative assessments. The results show that the analysis can be used as the criteria for determining proper tolerance in linear generalization.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.123-127
• /
• 2002

In order to set up the design rule of micro optical bench, optical coupling efficiencies of two sets of test benches are calculated. Simple linear connections of incoming and outgoing optical fibers with and without ball lenses are designed. Positional errors that are possible in actual fabrication processes are considered in the calculations and their tolerances are determined from 3dB conditions. For a simple fiber-to-fiber connection, the working distance is limited to $2.7\mu\textrm{m}$ and tilt error $5.8^{\circ}$. When ball lenses are located in front of each fiber, the working distance can be extended over $60\mu\textrm{m}$ , but the positional errors have the strong interaction among position parameters and thus should be considered simultaneously for tolerance design.

• 대한전자공학회논문지SD
• /
• 제41권7호
• /
• pp.13-20
• /
• 2004

미세 광학 벤치의 설계를 위해서 두 가지 테스트 벤치에 대해 결합효율을 계산하였다. 광섬유로 들어오고 나가게 되는 빛을 볼 렌즈를 통과한 것과 그렇지 않은 것으로 설계하였다. 미세 광학 벤치의 실제 제작 과정에서 발생할 수 있는 광소자들의 위치 에러를 고려하여 시뮬레이션을 하였고, 그것들의 허용오차를 -3 ㏈ 조건으로 정하였다. 볼 렌즈가 없는 fiber-to-fiber에서는 lateral misalignment가 2.7 um 그리고 tilt 에러가 5.8o 이내로 나타났다. 각각의 광섬유 앞단에 광의 집속을 위해 볼 렌즈가 놓여지면 working distance는 60 um로 확장되어지나, 각각의 광소자들이 놓여진 위치 파라미터 사이에 보다 강한 교호작용이 존재하기 때문에 tolerance design을 위해 교호작용을 함께 고려해야 한다.

• 대한기계학회논문집
• /
• 제18권9호
• /
• pp.2257-2264
• /
• 1994

A method to evaluate the position performance for a stochastically defined planar robot manipulator is presented. Performance is defined as the operational reliability based upon the positional errors of the manipulator tip. An analytical method is developed and applied to a two-link robot manipulator through forward kinematics. This study includes uncertainties in the link length, pin center location and radial clearance. By virtue of the effective link length model, only the nominal manipulator model and statistical information on the uncertainties are required. The results from the analytical method is compared to those from the Monte Carlo simulation.

• Journal of Multimedia Information System
• /
• 제2권3호
• /
• pp.255-262
• /
• 2015

The modern manufacturing systems and technologies produce products that are more accurate day by day. This can be reached mainly by improvement the manufacturing process with at the same time restricting more and more the quality specifications and reducing the uncertainty in part. The main objective an industry becomes to lower the part's variability, since the less variability - the better is product. One of the part of this task is measuring the object's uncertainty. The main purpose of this study is to understand the application of bootstrap method for uncertainty evaluation. Bootstrap method is a collection of sample re-use techniques designed to estimate standard errors and confidence intervals. In the case study a surface of an automobile engine block - (Top view side) is measured by Coordinate Measuring Machine (CMM) and analyzed for uncertainty using Geometric Least Squares in complex with bootstrap method. The designed experiment is composed by three similar measurements (the same features in unique reference system), but with different points (5, 10, 20) concentration at each level. Then each cloud of points was independently analyzed by means of non-linear Least Squares, after estimated results have been reported. A MatLAB software tool used to generate new samples using bootstrap function. The results of the designed experiment are summarized and show that the bootstrap method provides the possibility to evaluate the uncertainty without repeating the Coordinate Measuring Machine (CMM) measurements many times, i.e. potentially can reduce the measuring time.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4121-4128
• /
• 2010

프로브 카드는 웨이퍼의 칩 검사에 사용된다. 또한 반도체의 고집적화에 따른 미세피치 대응으로 높은 위치 정도가 요구된다. 그러나 실제 장비에서는 하부 척에서 높은 열이 프로브 카드로 전달되어, 프로브 카드의 열변형을 초래하게 된다. 프로브 카드의 수직방향 열변형은 핀의 접촉관련 문제를 야기할 것이고, 수평방향의 열변형은 x-y 방향으로의 위치 오차를 만들 것이다. 따라서 프로브 카드는 허용 범위내의 열변형이 이루어지도록 재질과 구조를 갖게 설계되어야 한다. 본 연구에서는 유한요소 해석프로그램인 ANSYS$^{TM}$를 이용하여 프로브 카드의 실제 부하 조건들을 적용한 열전달 해석을 수행하였다. 정상상태 온도 구배에 대해 열변형이 계산되었으며, 최종적으로 적절한 설계변수들을 조정하여 열변형이 최소화 될 수 있는 새로운 구조를 제안하였다.