• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.961-965
• /
• 2006

Design Up/Down converters which use Digital IF( Intermediate Frequency) techniques from the present paper, against hereupon performance the criticism. The reason which uses Digital IF techniques is configured of passive elements and the position If frequency domains are fixed and they do not use in the position one frequency but, the external fringe land of the board which comes to be configured with Digital IF without from the communication frequency domain which is various there to be a flexibility, the use was under possibility. Like this configuration compares in analog Heterodyne mode of existing and it has the performance upgrade which is excellent it shows a high flexibility.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.720-725
• /
• 2010

In AGPS method, user position can be obtained even in the shadow region by improving signal sensitivity. A hybrid long integration scheme employing both coherent and non-coherent integration method is commonly used in AGPS receivers. Because coherent loss increases as residual frequency become large, residual frequency should be minimized to maximize coherent integration gain. This paper presents performance analysis of residual frequency estimator using FFT in fine-time assistance AGPS method. Considering the hardware complexity and the estimation accuracy, optimal length of FFT is proposed for GPS L1 C/A signal. Signal sensitivity for estimating the residual frequency is also analysed. By field experimental results, it is found that the residual frequency can be successfully estimated using 1 second snap-shot data when GPS signal strength is larger than -150 dBm and its RMS error is 3Hz.

• Ocean Systems Engineering
• /
• v.6 no.3
• /
• pp.265-287
• /
• 2016

The change of the global performance of a turret-moored FPSO (Floating Production Storage Offloading) with DP (Dynamic Positioning) control is simulated, analyzed, and compared for two different internal turret location cases; bow and midship. Both collinear and non-collinear 100-yr GOM (Gulf of Mexico) storm environments and three cases (mooring-only, with DP position control, with DP position+heading control) are considered. The horizontal trajectory, 6DOF (degree of freedom) motions, fairlead mooring and riser tension, and fuel consumptions are compared. The PID (Proportional-Integral-Derivative) controller based on LQR (linear quadratic regulator) theory and the thrust-allocation algorithm which is based on the penalty optimization theory are implemented in the fully-coupled time-domain hull-mooring-riser-DP simulation program. Both in collinear and non-collinear 100-yr WWC (wind-wave-current) environments, the advantage of mid-ship turret is demonstrated by the significant reduction in heave at the turret location due to the minimal coupling with pitch mode, which is beneficial to mooring and riser design. However, in the non-collinear WWC environment, the mid-turret case exhibits unfavorable weathervaning characteristics, which can be reduced by employing DP position and heading controls as demonstrated in the present case studies. The present study also reveals the plausible cause of the failure of mid-turret Gryphon Alpha FPSO in milder environment than its survival condition.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.1
• /
• pp.80-91
• /
• 2009

In this study, a prediction theory for specific noise that is the overall characteristic of the fan has been proposed. This theory is based on total pressure prediction and broadband noise prediction. The specific noises of two forward curved fans with different number of blades were predicted. The flow around the impeller having 120 blades (MF120) was more biased at a certain positions than the impeller with 40 blades (MF40). An effective domain of the energy conversion of MF40 has extended overall than MF120. The total pressure was affected by the slip factor and pressure loss caused by the vortex flow. The suppression of a major pressure drop by the vortex flow and expansion of the effective domain for energy conversion contributed to an increase in the total pressure of MF40 at the design point. The position of maximum relative velocity was different for each fan. The relative velocity of MF120 was less than that of MF40 due to the deviation angle. The specific noise of MF120 was 2.7 dB less than that of MF40 due to the difference in internal flow. It has been quantitatively estimated that the deceleration in the relative velocity contributed to the improvement in the overall performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.156-165
• /
• 1997

In the practical control systems, the dynamic range of actuatiors is limited(or saturated) when actuators are driven by sufficiently large signals. This gives rise to a nonlinearity as a result of actuator saturation. For example, the upper limit is imposed on productive capability by available factory space and capital equipment. Other examples of those kinds of actuator saturations are a maximum torque of the actua- ting motors and a throttle position in an aircraft speed control A saturating actuator may lead not only to a large overshoot during start-up and shut-down, but also to deterioration of the performance due to the uncertainties. That is, the speed of response is decreased and, possibly, the system output may not follow the lalrge reference inputs. The large-overshoot may be accompanied by rest wind-up(or called by integra- tor wind-up) which comes from controllers with integral action in saturation operation regions. Eventually, as the overshoot increases, the system has a limit cycle or becomes oscillatorily unstable. Due to these cir- cumstances, many studies are focused on the stability and robustness of the nonlinear systems with satu- rating actuator in the time-domain as well as in the frequency-domain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.951-959
• /
• 2011

The low power consumption modulation is required for short range communication. In this paper, we analyze performance of low power consumption modulation scheme such as PSPM, PSSK and QAPM using OFDM transmission in AWGN channel. A PSPM, PSSK and QAPM modulation scheme are decrease in bandwidth efficiency but improved power efficiency than existing PSK and QAM. These modulation schemes can achieve power efficiency because every symbol of modulations has a zero-envelope period like PPM techniques. The OFDM system is high bandwidth efficiency than single carrier system. In this paper, we are propose the frequency domain mapping method for OFDM transmission using low power consumption modulation method. Also, we compare low power OFDM communication system regard to BER performance, throughput and PAPR.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.10-10
• /
• 2002

This paper introduces the high-resolution channel estimation technique which are used to estimate the first arrival multipath delay component. The proposed technique yields the precise estimate of the first time arrival which is directly related to the performance of TDOA-based position location. The proposed technique utilizes the transformed auto-correlation function of received common pilot signal in frequency domain, its samples compose the hermitian Toeplitz matrix at sequel. Then the time delay components could be estimated with precision by the analysis of eigen-structure of corresponding matrix. In this paper, obeying the modified CODIT model, the performance of the PR-IPDL(Pseudo Random-Idle Period Downlink) and TA-IPDL(Time Aligned-Idle Period Downlink considered as 3GPP position location technique will be exploited systematically through the computer simulations with applying the proposed technique.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.268-276
• /
• 2002

This paper introduces the high-resolution channel estimation technique which are used to estimate the first arrival multipath delay component. The proposed technique yields the precise estimate of the first time arrival which is directly related to the performance of TDOA-based position location. The proposed technique utilizes the transformed auto-correlation function of received common pilot signal in frequency domain, its samples compose the hermitian Toeplitz matrix at sequel. Then the time delay components could be estimated with precision by the analysis of eigen-structure of corresponding matrix. In this paper, obeying the modified CODIT model, the performance of the PR-IPDL(Pseudo Random-Idle Period Downlink) and TA-IPDL(Time Aligned-Idle Period Downlink considered as 3GPP position location technique will be exploited systematically through the computer simulations with applying the proposed technique.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.424-431
• /
• 2020

This paper focused on the development of sports robot that detects a human player and shots a serve ball automatically. When robot technologies apply to the sports machine, the domain problems occurs such as outdoor environments and playing condition to recognize the visual and the vocal modalities. Gaussian mixture model and Kalman filter are used to detect the player's position in the left, right, and depth direction and to avoid the noises caused by the player's posture variation around the net. The sports robot is designed by the pan-tilt structure to shot a serve ball by pneumatic control under the multi layered software architecture. Finally, the proposed tracking and the machine performance are discussed by experimental results.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.4
• /
• pp.357-366
• /
• 2020

This paper addressed a relative navigation method for autonomous rendezvous and docking of cube-satellites using single frequency Differential GPS (DGPS) under the intermittent communication between satellites. Since the ionospheric error of GPS measurement is variable depending on the visible satellites, a few meters error of relative navigation is occurred in the Low-Earth Orbit (LEO) environment. Therefore, it is essential to remove the ionospheric error to perform relative navigation. Besides, an intermittent communication period for receiving GPS measurements of the target satellite is limited for getting information every sampling time. To solve this problem, a method combining range domain DGPS and orbit propagation is proposed in this paper. The proposed method improves the performance of DGPS by using Hatch filter and solves an intermittent communication problem by estimating the relative position and velocity using Hill-Clohessy-Wiltshire Equation. Through the simulation, it is verified that the suggested algorithm provides the relative position error within RMS 0.5 m and the relative velocity error within RMS 3 cm/s. Furthermore, it has the advantage that it is suitable for real-time implementation using single-frequency GPS measurements and is computationally efficient.