• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.66-73
• /
• 2008

This paper presents a position sensorless control system of SRM over wide speed range. Due to the doubly salient structure of the SRM, the phase inductance varies along with the rotor position. Most of the sensorless control techniques are based on the fact that the magnetic status of the SRM is a function of the angular rotor position. The rotor position estimation of the SRM is somewhat difficult because of its highly nonlinear magnetizing characteristics. In order to estimate more accurate rotor position over wide speed range, Neural Network is used for this highly nonlinear function approximation. Magnetizing data patterns of the prototype 1-hp SRM are obtained from locked rotor test, and used for the Neural Network training data set. Through measurement of the flux-linkage and phase currents, rotor position is able to estimate from current-flux-rotor position lookup table which is constructed from trained Neural Network. Experimental results for a 1-hp SRM over 16:1 speed range are presented for the verification of the proposed sensorless control algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.64.5-64
• /
• 2001

It is a very important problem that we grasp the accurate position at car navigation system. The GPS has used for knowing position because of accumulating few errors, but it have errors that are Tropospheric error, ionospheric error and Multipath error and so on. In this paper, We estimate moving position of a vehicle by Kalman filter using initial value after deducing the line equation using initial value and target value of map data. Then, we compensate GPS errors compare estimated poing with GPS errors. The experimental results have shown that are compared position data during real travel with compensated position data which are got after applying the algorithm ...

• 한국정보과학회논문지:데이타베이스
• /
• 제34권4호
• /
• pp.343-356
• /
• 2007

센서 네트워크, 위치 기반 서비스 등의 기술 발전에 따라, 최근의 이동객체 위치정보는 연속적이고 끊임없이 변경되는 스트림 데이타 형태를 가지게 되었다. 본 논문에서는 이와 같이 스트림 형태로 발생하는 이동객체의 위치정보를 제한된 메모리에 저장하고, 과거 위치를 추정하는 효율적인 방법을 제안한다. 이를 위하여, 우선 제한된 메모리 양으로 지속적으로 추가되는 이동객체의 과거 위치 이력을 저장하기 위한 위치정보의 점진적 추출(incremental extraction) 개념을 제시한다. 점진적 추출이란 새로운 위치정보가 추가될 때마다, 시스템이 관리해야 할 과거 위치정보를 기존 위치정보와 새로운 위치정보를 바탕으로 점진적으로 추출하는 방법을 의미한다. 그런 다음, 이러한 점진적 추출 개념을 적용하여 스트림 환경에서 위치정보를 저장 및 추정하는 전체적인 프레임워크를 제시한다. 그리고, 제안한 프레임워크 하에서 추정위치를 계산하는 방법으로 다항식을 이용한 직선기반과 곡선기반 방법을 제시한다. 다음으로, 점진적 추출 개념을 사용하여 과거 위치를 추출하는 방법으로 균등 간격 추출, 기울기 기반 추출. 그리고 최근 시점강조 추출의 세 가지 방법을 제시한다. 실험 결과, 제안한 점진적 추출 방법은 적은 비율(0.1%)의 위치정보를 저장함에도 불구하고 과거 위치추정에 있어 비교적 높은 정확도(오차율 3% 이내)를 나타냈다. 특히, 곡선기반의 점진적 추출 방법은 전체 위치 데이타의 0.1% 만을 저장하면서도 오차율 1.5% 미만의 높은 정확도를 나타내었다. 이러한 결과로 볼 때, 제안한 방법은 스트림 환경에서 이동객체의 위치정보를 저장하고, 과거 위치를 추정하는 우수한 연구결과라 사료된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1858-1862
• /
• 2005

Stepping motor normally operates without feedback and may loss the synchronization. This problem can be prevented by using positional feedback. This paper introduces one method for closed loop control of stepping motor and a method for combining full-step control and micro-step control. This combination controlling apparatus can perform position control with high accuracy in a high speed, so that it will not suffer from vibration (or hunting) problem when stopping motor. Controlling apparatus contains a position counter block for detecting rotor position of stepping motor, a driving block for supplying current to windings of stepping motor, a control block for comparing output signal of position counter block with command position (desired position) and outputting current command signal based on deviation between current position and command position of rotor. To output current command signal, the control block refers to a sine wave data table. This table contains value of duty cycle of Pulse Width Modulation signal. As the second object of this paper, the process of building this data table is also presented.

• 한국정보과학회논문지:데이타베이스
• /
• 제33권3호
• /
• pp.261-270
• /
• 2006

위치기반서비스에서 이동체의 위치 데이타 수집 비용을 줄이기 위하여 위치 데이타를 주기적으로 수집한다. 주기적으로 수집된 위치 데이타는 보고 주기 사이의 위치 변화를 반영하지 못하기 때문에 시간에 대한 선형 함수를 이용하여 예측된 위치 데이타와 오차가 발생한다. 따라서 오차를 포함한 불확실한 미래위치데이타로 인하여 TPR 트리에서 현재위치질의의 정확도가 떨어지는 문제점이 발생한다. 이 논문에서는 불확실한 위치 데이타에 대한 현재질의를 처리하기 위하여 선형 함수에 의해 예측된 위치 데이타에 오차분을 반영한 불확실성 영역을 정의하고 불확실성 영역을 설정하기 위하여 최근 예측 오차 가중치 기법과 칼만 필터 기법을 제시한다. 또한 TPR 트리를 기반으로 불확실성 영역을 반영한 질의 처리기를 구현하고 성능 비교 평가를 수행한다. 성능 평가 결과에 따르면 기존의 선형함수 기반 질의처리 기법보다 불확실성 영역 기반 질의처리 기법이 최소 약 15% 이상의 정확도가 향상되는 장점을 가진다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.697-700
• /
• 2000

This paper introduces a new rotor position estimation algorithm for the SRM based on the magnetizing curves of aligned and unaligned rotor positions. The flux linkage is calculated by the measured data from phase voltage and phase current and the calculated data are used as the input of magnetizing profiles for rotor position detection. Each of the magnetizing profiles consisted of the methods using the neural network and fuzzy algorithm And also the optima phase is selected by phase selector. To demonstrate the promise of this approach the proposed rotor position estimation algorithms are verified by the experiment results or variable spee range.

• 전자공학회논문지S
• /
• 제34S권1호
• /
• pp.16-25
• /
• 1997

This paper shows the development of the high accuracy vehicle positioning algorithm using the differential technique in vehicle tracking systems form the existing vehicle position which is acquired from the global positioning system (GPS). The control center receives the satellite ephemerise data and pseudorange correction from the reference station, and vehicle position from the moving vehicle. The pseudorange is calculated with the satellite position and the vehicle position, and corrected by pseudorange correction. Using this corrected pseudorange and kalman filter, more improved vehicle positioning data were obtained.

• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.745-758
• /
• 2005

This paper presents a statistical analysis on the position-specific distributions of amino acid residues in transmembrane proteins. A hidden Markov model segments membrane proteins to produce segmented regions of homogeneous statistical property from variable-length amino acids sequences. These segmented residues are analyzed by using chi-square statistic and relative-entropy in order to find position-specific amino acids. This analysis showed that isoleucine and valine concentrated on the center of membrane-spanning regions, tryptophan, tyrosine and positive residues were found frequently near both ends of membrane.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1259-1263
• /
• 2004

This paper describes position estimation algorithm using neural network for the navigation of the vision-based wheeled mobile robot (WMR) in a corridor with taking ceiling lamps as landmark. From images of a corridor the lamp's line on the ceiling in corridor has a specific slope to the lateral position of the WMR. The vanishing point produced by the lamp's line also has a specific position to the orientation of WMR. The ceiling lamps have a limited size and shape like a circle in image. Simple image processing algorithms are used to extract lamps from the corridor image. Then the lamp's line and vanishing point's position are defined and calculated at known position of WMR in a corridor. To estimate the lateral position and orientation of WMR from an image, the relationship between the position of WMR and the features of ceiling lamps have to be defined. But it is hard because of nonlinearity. Therefore, data set between position of WMR and features of lamps are configured. Neural network are composed and learned with data set. Back propagation algorithm(BPN) is used for learning. And it is applied in navigation of WMR in a corridor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.3016-3018
• /
• 2005

The PSD(Position Sensitive Detector) is a sensor for detecting the position of incident light. Because of its various advantages, it is used for position and angle sensing, optical range finders, laser displacement sensing, and etc. In the previous study of the position finding system, the laser tracking robot is developed. Small data rate and unidirectionality is the characteristics of data communication both DSP-based pan/tilt control board and the robot. If we can transmit data to the target using PSD sensor and laser diode module, there is no need for communication devices such as the bluetooth and wireless module. For this reason, this paper presents the new method for data transmission. Transmit data using RS-232 is modulated by a VTF(Voltage To Frequency) converter The laser diode module transmits the modulated data. And then the PSD sensor receive that data. Demodulation process is accomplished by the system which is consisted with trans-impedance amplifier, FTV(Frequency To Voltage) converter, and etc.