• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.638-645
• /
• 2014

This paper presents results of a study for development and application of container massive transportation system. The system is aimed to improve competing power of Korean container ports. This paper selects Double stack Multi-Trailer System (DMTS) under consideration of pros-con analysis between three systems alternatives as well as operation process of existing Korean container terminal companies. An analysis of turning radius is undertaken for applying the system. Key elementary technologies was derived by patent analysis. DMTS has no problems in utilization to existing Korean container ports. Further, the system is expected to highly potential to improve operational efficiency in the container ports thanks to its high unit transportation capacity.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.5
• /
• pp.155-161
• /
• 2023

97.5% of our country's exports and 87.2% of imports are transported by sea, making ports an important component of the Korean economy. To efficiently operate these ports, it is necessary to improve the short-term prediction of port water volume through scientific research methods. Previous research has mainly focused on long-term prediction for large-scale infrastructure investment and has largely concentrated on container port water volume. In this study, short-term predictions for petroleum and liquefied gas cargo water volume were performed for Ulsan Port, one of the representative petroleum ports in Korea, and the prediction performance was confirmed using the deep learning model LSTM (Long Short Term Memory). The results of this study are expected to provide evidence for improving the efficiency of port operations by increasing the accuracy of demand predictions for petroleum and liquefied gas cargo water volume. Additionally, the possibility of using LSTM for predicting not only container port water volume but also petroleum and liquefied gas cargo water volume was confirmed, and it is expected to be applicable to future generalized studies through further research.

• Journal of Korea Port Economic Association
• /
• v.38 no.2
• /
• pp.123-138
• /
• 2022

Korea has been huge investments in its port system, annually upgrading its infrastructure to turn the ports into Asian hub port. However, while Busan port is ranked fifth globally for container throughput, Other Korean ports are ranked much lower. This article applies Data Envelopment Analysis (DEA) and Malmquist Productivity Index (MPI) to evaluate selected major Korean seaports' operational efficiency and productivity from 2010 to 2018. It further integrates Principal Component Analysis (PCA) into DEA, with the PCA-DEA combined model strengthening the basic DEA results, as the discriminatory power weakens when the variable number exceeds the number of Decision Making Units(DMU). Meanwhile, MPI is applied to measure the seaports' productivity over the years. The analyses generate efficiency and productivity rankings for Korean seaports. The results show that except for Gwangyang and Ulsan port, none of the selected seaports is currently efficient enough in their operations. The study also indicates that technological progress has led to impactful changes in the productivity of Korean seaports.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2016

In this study, a Vessel Shore Report Management System (VSRMS) is developed for the International Maritime Organization (IMO), Maritime Service Portfolio (MSP) Number 8, which comprises vessel shore reporting. Several documents have to be completed before the arrival/departure of a vessel at a port, as each national port has its own reporting format and data. The present vessel reporting system is inefficient, time-consuming, and involves excessive paperwork, which results in duplications and errors. To solve this problem, in this study, the vessel reporting formats and data contents of various national ports are investigated, as at present, the reporting documents required by the current IMO standard includes insufficient information which is requested by national ports. Initially, the vessel reporting information of various national ports are collected and analyzed. Subsequently, a database structure for managing vessel reporting data for ports worldwide is devised. To make the transfer of data and the exchange of information of vessel reports much more reliable, efficient, and paper-free, VSRMS, which is a software application for the simplification and facilitation of vessel report formalities, is developed. This application is developed using the latest Microsoft C#.Net Programming Language in the Microsoft Visual Studio framework 4.5. It provides a user interface and a backend MySQL server used for database management. SAP Crystal Reports 2013 is used for designing and generating vessel reports in the original report formats. The VSRMS can facilitate vessel reporting and improve data accuracy through the reduction of input data, efficient data exchange, and reduction of the cost of communication. Adoption of the VSRMS will allow the vessel shore reporting system to be automated, resulting in enhanced work efficiency for shipping companies. Based on this information system and architecture, the consensus of various international organizations, such as the IMO, the International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA), the Federation of National Associations of Ship Brokers and Agents (FONASBA), and the Baltic and International Maritime Council (BIMCO), is required so that vessel reporting is standardized internationally.

• Journal of Navigation and Port Research
• /
• v.40 no.2
• /
• pp.51-56
• /
• 2016

Expressways mean the primary arterial highways with a high level of efficiency and safety. However, Gyeongbu and Namhae expressways connected with Busan ports are showing travel time delay by increased traffic including the medium/large-sized vehicles of about 20% compared to those of about 13% regardless of the peak periods. This study, thus, intends to analyze lane traffic characteristics in the basic 8-lane segments of the above-mentioned expressways, compute the planning and buffer times based on travel time reliability, find the lane speed showing a higher correlation with planning time between the lane speeds in the basic 8-lane segments, and finally suggest a correlation model for predicting the planning time in expressways.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.409-411
• /
• 2008

Water conveyance from waste water treatment plant can play a role in securing river water quantitatively in urban watershed, but it can also cause more severe contamination of river water due to lack of water quality management. Soil aquifer treatment(SAT) has been introduced to overcome the worsening water quality in the water conveyance system considering the characteristics of Korean urban watershed. The application of SAT to the water conveyance system not only improve water quality of ordinarily discharged water but also prevent accidential water pollution to the urban watershed. Since most domestic urban watersheds are consist of narrow terrace lands and surrounded by roads, SAT is estimated not to be appropriate to the urban watershed with respect to the quantitative efficiency. However, since the upstream of urban watershed in which discharge ports are located usually consists of agricultural lands, SAT can be applied near discharge ports. Therefore, combination of water conveyance and SAT is expected to supply clean and safe river water in urban watershed.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2006.08a
• /
• pp.253-276
• /
• 2006

This paper has shown the trend of competition positioning of 26 Korean ports in 1994, 1999, and 2003 by using BCG matrix which consists of relative market shares, growth rate of cargo handling, and also growth rate and CCR and BCC efficiency scores with scale efficiency scores in the vertical and horizontal axes. The empirical main results are as follows. First, Incheon Port, Pyungtag Port, Gwangyang Port, Busan Port, Pohang Port and Woolsan Port have shown their competitive positioning in terms of market share and growth rate. Second, Pyungtag Port, Wando Port, Tongyoung Port, Gohyun Port, Samcheog Port, and Okgae Port have their competitive positioning in terms of growth rate and scale efficiency scores. The main policy implication of this paper is to emphasize that BCG matrix method using in this paper can give seaport manager the basic information for planning the future port management for enhancing the competitive positioning among Korean seaports.

• Solar Energy
• /
• v.10 no.3
• /
• pp.3-12
• /
• 1990

This paper deals with experimental research to increase thermal storage efficiency of hot water stored in an actual storage tank for solar application. The effect of increased energy input rate due to stratification has been discussed and illustrated through experimental data, which was taken by changing dynamic and geometric parameters. Ranges of the parameters were defined for flow rate, the ratio of diameter to height of the tank and inlet-exit water temperature difference. During the heat storage, when the flow was lower, the temperature difference was larger and the ratio of diameter to height of the tank was higher, the momentum exchange decreased. As for this experiment, when the flow rate was 8 liter/min, the temperature difference was $30^{\circ}C$ and the ratio of diameter to height of the tank was 3, the momentum exchange was minimized resulting in a good thermocline and a stable stratification. In the case of using inlet ports, if the modified Richardson number was less than 0.004, full mixing occured and so unstable stratification occured, which mean that this could not be recommended as storage through thermal stratification. Using a distributor was better than using inlet ports to form a sharp thermocline and to enhance the stratification. It was possible to get storage efficiency of 95% by using the distributor, which was higher than a storage efficiency of 85% obtained by using inlet ports in same operation condition. Furthermore, if the distributor was manufactured so that the mainpipe decreases in diameter toward the dead end to maintain constant static pressure, it might be predicted that further stable stratification and higher storage efficiency are obtainable(ie:more than 95%).

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.209-239
• /
• 2008

The purpose of this paper is to investigate the effectiveness of Korean port investment by using the newly developed slack-based multi-year panel congestion model of DEA(Data Envelopment Analysis). Inputs[port investment amount, cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, number of ship calls, revenue, and score of customer service satisfaction] are used during 1994-2004 for 20 Korean seaports. Empirical analysis identified congestion especially in port investment as input at the ports of Gunsan, and Busan in the all 3 models, and the ports of Pyungtag, Mogpo, Yeosu, and leju in over 2 models. Port investment induced the rapid increase of port efficiency from the ports of Masan, Incheon, Donghae, and Samcheok. Therefore other ports except these ports should examine the reason about the inefficiency of port investment by searching out the situation of each ports directly. The main policy implication based on the findings of this study is that The Ministry of Land, Transport and Maritime Affairs in Korea should introduce the new measurement way after reviewing the multi-year slack-based congestion approach when the amount of port investment for each port is decided.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.69-84
• /
• 2018

The purpose of this study is to provide a comparative evaluation of container port criteria at four major container ports in the Bay of Bengal, including Colombo Port in Sri Lanka, Chennai Port in India, Chittagong Port in Bangladesh and Yangon Port in Myanmar. Important container port selection criteria are identified and comparisons among container ports are made using previous studies, personal interviews and questionnaires, completed by top shipping companies, freight forwarders, logistics service providers, and experts in Myanmar. The AHP method is used to verify the research model and hypothesis. This study identified five main criteria and eleven sub-criteria when choosing potential regional hub ports among the four ports in the Bay of Bengal. The main findings from the five main criteria suggest that port efficiency is the highest priority criteria, and the second priority is port costs. The criteria of geographical location and available port facilities are the third and fourth most important, respectively, and the last priority is port's hinterland. Regarding the relative competition among these ports, Colombo Port obtained the highest priority among the four influential factors except for port hinterland. This study has certain limitations that will require future research. First, the sample group for the population size is relatively small. Second, interviewees had limited experience answering questionnaires using this methodology and a limited amount of time was available for respondents for the interviews.