• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.101-110
• /
• 2014

The ministry of Land, Infrastructure and Transport announced that they launched the pilot project to offer Happy House built with modular construction as part of the major projects of incumbent government in 2013. The market size of modular construction is getting increasingly enlarged together with strong will of government. The major challenges that current modular construction encounters can be summed up as lack of standardization of material on the stage of design and fabrication. The portion of material costs in modular construction marks 16 to 17% higher than the existing other construction method, and account for 60 % of total construction cost, which is why material management is the most important factor. However, the imperfect standardization and specification on design causes high loss of materials on fabrication, which makes the construction wastes and total construction cost increasing in accordance with the increase of material costs. This study has been conducted to verify major modules by developing optimization algorithm on gypsum board material among wall finishing materials. It is expected that this paper contributes not only to eco-friendly construction by minimizing the waste factors of materials through these efforts, but also to removing high cost issues which had been recognized as a setback of current modular construction.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.103-113
• /
• 2017

In the current study, retarding type and standard type admixture design of concrete have been proposed to control the generation of hydration heat for foundation members that use high strengths concrete. Finite element analysis also has been conducted to understand the rational placing heights of concrete. In addition, real-size structures have experimented and their results were compared to the analytical results to evaluate the reducing effect of thermal stress. For a large $6.5m{\times}6.5m{\times}3.5m$ member with retarding and standard type horizontal partition placement of concrete showed the manageable possibility of temperature difference within 25-degree Celcius between the middle and surface portion while the maximum temperature was 77-degree Celcius. Also, temperature cracking index from the finite element analysis appeared to be 1.49 that predicts no formation of cracking due to the effects of temperature. Finally, it appeared that horizontal partition placement of retarding and standard type concrete has the significant effect of reducing the thermal stress that generated by the hydration heat in the high strengths mass concrete.

• Journal of the Korean Dietetic Association
• /
• v.14 no.1
• /
• pp.51-63
• /
• 2008

The purpose of this study was to understand the management status of food wastes in school meal to find the effective ways that would reduce and recycle them. Data was collected using questionnaires from 223 school dietitians located in Jeonbuk area. The results were as followed : 1) Waste was managed by the dietitians(54.7%) and cook(42.2%). The waste disposal contract was made by dietitians(65.0%), executives(31.4%). Therefore, school dietitians had primary responsibilities in the waste management. 2) As disposal ways, 48.9% processed municipal solid waste and food waste together and 46.6% processed separately. 3) A half of schools(52.9%) produced food wastes weighed under 10$\sim$15kg daily and using food wastes as animal food for farms was most popular method to dispose(87.4%). 4) Reasons to have food-wastes were disliking the taste of menu(50.2%) and the inappropriate ways of dealing with remaining food(64.1%) and donating to food bank(33.6%) in order. 5) The suggested ways to reduce the food-waste was to improve on cooking method(72.2%), changing of portion size(61.0%), measuring the amount of leftover food(53.4%) and requesting cooperation to educators(52.9%). 6) The reported consequences of reducing the food waste were: lowered grocery expenses(46.2%), and inspiring students on helping environmental preservation(23.8%). Therefore, the administration should work on finding a method to reduce food-waste and a way to use these resources efficiently. It is important to induct student's attitude on recycling remaining products by using food bank via nutrition education. Dietitian also should consider to reduce the leftover of food by using a standardized recipe.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.166-172
• /
• 2005

In order to prepare liqueur of Acanthopanax koreanum, changes in major constituents by soaking below 0.5 cm size dried sample 700 g in 10 l of $15{\sim}95%$ spirit solution for 70 days were investigated. Color b was increased according to lower ethanol concentration and longer soaking periods. Extract was increased gradually with soaking periods, and the content was $0.6{\sim}0.7%$ (w/v) with stem, $1.0{\sim}1.5%$ (w/v) with root. Eleutheroside B and E were extracted rapidly within 20 days of soaking, moreover were increased according to ethanol concentration within 15% to 70%. Acantoic acid was extracted rapidly $2.8{\sim}22.6\;{\mu}g/ml$ with stem, and $560{\sim}1,700\;{\mu}g/ml$ with root within 5 to 10 days. For preparation of liqueur of Acanthopanax koreanum, it is necessary to soak more portion of dried root with $60{\sim}80%$ ethanol concentration for $30{\sim}50$ days, and then to blend after aging for 13 weeks.

• The Korean Journal of Zoology
• /
• v.31 no.4
• /
• pp.334-343
• /
• 1988

Five types of synaPses were differentiated in the antennal lobe or Pieris rapoe. aev are in general axo-dendritic synapses and have symmetrical contacts. The type I synapses contain the uniformly round vesicles of medium size, and consist of the 11% of all synapses in the antennal lobe. The type synapses are filled with the small flat and densely arranged (19%). The type III synapses possess medium-sized round vesicles and dense core ones(24%). The type IV synapses are characterized by such three kinds of vesicles as small round, small flat and dense core vesicles(33%). The type V synapses exhibit the presence of medium-sized round, large round and dense core vesicles(13%). The removal of the left antenna on its proximal portion caused the type IV boutons of the above ave types in ipsilateral antennal lobe to turn into dark or semidark degenerative changes. Therefore, it was concluded that many of the antennal receptor cells projected into the brain terminate in the antennal lobe to form type IV synapses together with the dendrites. 배추회나비 뇌의 촉각엽에 있는 신경세포들은 5가지의 신경연접을 형성하는 것으로 관찰되었다. 이 신경연접들은 모두 축색과 수상돌기간의 연접으로 대칭연접이었다. 제1형 신경연접은 축색종말내에 중등도크기의 단형 연접소포를 가지고 있었고, 촉각엽에 있는 5가지의 신경연접중 11%의 출현빈도수로 관찰되었다. 제2형 신경연접의 축색종말에는 장형과 도형의 2가지 연접소포가 포함되어 있었는데, 모두 소형이었으며 이같은 연접소포들이 축색 종말내에서 조밀하게 관찰되었다. 제2형 신경연접의 출현 빈도수는 19%이었다. 제3형 신경연접은 축색 종말내에 중등도크기의 도형 연접소포와 DENSE CORE VESICLE을 포함하고 있었고 그 출현빈도수는 24%이었다. 제4형 신경연접은 축색총말내에 소형의 도형, 소형의 장형 연접소포 및 DENSE CORE VESICLE의 3가지 연접소포를 가지고 있었고 출현빈도수는 촉각엽에서 가장 큰 33%이었다. 제5형 신경연접은 축색종말내에 중등도크기의 원형, 대형의 원형연접소포 및 DENSE CORE VESICLE을 포함하였고 13%의 출현빈도수로 관찰되었다. 배추횐나비의 촉각에 있는 지각신경세포가 뇌의 촉각엽으로 뻗어 들어가 위의 5가지 신경연접중 어느 형을 형성하는지를 관찰하기 위하여 좌측 촉각의 기부를 제거하여 지각신경세포를 절단하였는데 그 결과, 좌측 촉각엽에서 제4형의 신경연접이 퇴행성 변화를 나타내었다. 그러므로 촉각의 지각신경세포는 뇌의 같은 족 촉각엽에 뻗어와 제4형 신경연접을 형성한다고 결론되었다.

• Korean Journal of Community Nutrition
• /
• v.15 no.3
• /
• pp.379-392
• /
• 2010

The purposes of this study were to investigate recipients' handling and consumption of home-delivered meals at home and to assess their perceptions on home-delivered meal services for older adults. A total of 312 elderly people who received home-delivered foodservice were surveyed using an individual interview technique. A statistical data analysis was completed using SPSS (ver. 14.0). It was found that 90.2% (n = 166) of the lunch box recipients received services for six days per week, and 76.6% (n = 95) of the side-dish recipients got services once per week. More than half of the clients reported that they cooked meals by themselves on days when meals were not delivered. The two hundred thirty-two (75.3%) ate their meals as soon as they were delivered. It was found that 66.8% of the lunch box recipients and 7.3% of the side-dish recipients left delivered meals on the counter (at room temperatures) before eating. Only 11.4% of the lunch box recipients and 48.4% of the side-dish recipients kept delivered meals in the refrigerator before eating. Less than half of the lunch box recipients consumed all foods they were served at once. The reasons the recipients did not eat their all meals delivered at once were "saving for next meals" and "big portion size" Of those clients who left delivered meals, 19% of the lunch box recipients and 9.7% of the side-dish recipients ate leftovers without reheating. An average score of quality of delivered meal services was 3.5 out of 5 points. The results suggest that the clients of the home-delivered meal service should be provided information on proper handling and consumption practices with delivered meals at home. The findings of the study will be used to develop nutrition and food safety management guidelines for senior foodservice.

• The Korean Journal of Quaternary Research
• /
• v.17 no.2
• /
• pp.163-163
• /
• 2003

The study area, Kwangneung Experiment Forest (KEF) is located on the west-central portion of Korean peninsula and belongs to a cool-temperate broadleaved forest zone. At the old-growth deciduous forest near Soribong-peak (533.1m) in KEF, we have established a permanent plot and a flux tower, and the site was registered as a KLTER site and also a KoFlux site. In this study, we aimed to present basic ecological characteristics and synthetic data of carbon budgets and flows, and some monitoring data which are essential for providing important parameters and validation data for the forest dynamics models or biogeochemical dynamics models to predict or interpolate spatially the changes in forest ecosystem structure and function. We made a stemmap of trees in 1 ha plot and analyzed forest stand structure and physical and chemical soil characteristics, and estimated carbon budgets by forest components (tree biomass, soils, litter and so on). Dominant tree species were Quercus serrata and Carpinus laxiflora, and accompanied by Q. aliena, Carpinus cordata, and so on. As a result of a field survey of the plot, density of the trees larger than 2cm in DBH was 1,473 trees per ha, total biomass 261.2 tons/ha, and basal area 28.0 m2/ha. Parent rock type is granite gneiss. Soil type is brown forest soil (alfisols in USDA system), and the depth is from 38 to 66cm. Soil texture is loam or sandy loam, and its pH was from 4.2 to 5.0 in the surface layer, and from 4.8 to 5.2 in the subsurface layer. Seasonal changes in LAI were measured by hemispherical photography at the l.2m height, and the maximum was 3.65. And the spatial distributions of volumetric soil moisture contents and LAIs of the plot were measured. Litterfall was collected in circular littertraps (collecting area： 0.25m2) and mass loss rates and nutrient release patterns in decomposing litter were estimated using the litterbag technique employing 30cm30cm nylon bags with l.5mm mesh size. Total annual litterfall was 5,627 kg/ha/year and leaf litter accounted for 61% of the litterfall. The leaf litter quantity was highest in Quercus serrata, followed by Carpinus laxiflora and C. cordata, etc. Mass loss from decomposing leaf litter was more rapid in C. laxiflora and C. cordata than in Q. serrata litter. About 77% of C. laxiflora and 84% of C. cordata litter disappeared, while about 48% in Q. serrata litter lost over two years. The carbon pool in living tree biomass including below ground biomass was 136 tons C/ha, and 5.6 tons C/ha is stored in the litter layer, and about 92.0 tons C/ha in the soil to the 30cm in depth. Totally more than about 233.6 tons C/ha was stored in DK site. And then we have drawn a schematic diagram of carbon budgets and flows in each compartment of the KEF site.

• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.761-782
• /
• 2006

Public concern about potential environmental risks of agricultural business for the livestock production and processing is increasing. However, due to differences in general industry structural characteristics, such as farm production and waste management practices, the effect of environmental policies may differ from species to species as well as across size categories. I hypothesize that additionally the Hog subsector may be more responsive to (or a greater driver of) a changing environmental policy environment than the beef cattle subsector. As a result, I expect to see more evidence of sensitivity in the environmental policy milieu from hog-operation stocking and location decisions than with the beef cattle industry. The written stringency may not effective, instead state's willingness to enforce has directed and regulated. However, in presence of rapid structural change, just like hog, industry location is affected by state regulation. The environmental compliance cost may be a small portion of industry total cost and fixed cost of beef industry makes for them to take into account environmental compliance for their decision location making. The special movements of flog industry have chance to minimize the cost of the operation and they willing to locate less stringent place.

• Journal of KIISE:Databases
• /
• v.34 no.4
• /
• pp.343-356
• /
• 2007

Due to advances in position monitoring technologies such as global positioning systems and sensor networks, recent position information of moving objects has the form of streaming data which are updated continuously and rapidly. In this paper we propose an efficient trajectory maintenance method that stores the streaming position data of moving objects in the limited size of storage space and estimates past positions based on the stored data. For this, we first propose a new concept of incremental extraction of position information. The incremental extraction means that, whenever a new position is added into the system, we incrementally re-compute the new version of past position data maintained in the system using the current version of past position data and the newly added position. Next, based on the incremental extraction, we present an overall framework that stores position information and estimates past positions in the stream environment. We then propose two polynomial-based methods, line-based and curve-based methods, as the method of estimating the past positions on the framework. We also propose three incremental extraction methods: equi-width, slope-based, and recent-emphasis extraction methods. Experimental results show that the proposed incremental extraction provides the relatively high accuracy (error rate is less than 3%) even though we maintain only a little portion (only 0.1%) of past position information. In particular, the curve-based incremental extraction provides very low error rate of 1.5% even storing 0.1% of total position data. These results indicate that our incremental extraction methods provide an efficient framework for storing the position information of moving objects and estimating the past positions in the stream environment.

• Restorative Dentistry and Endodontics
• /
• v.33 no.2
• /
• pp.83-89
• /
• 2008

The purpose of this study was to evaluate the effect of the polymerization shrinkage and modulus of elasticity of composites on the cusp deflection of class V restoration in premolars. The sixteen extracted upper premolars were divided into 2 groups with similar size. The amounts of cuspal deflection were measured in Class V cavities restored with a flowable composite (Filtek flow) or a universal hybrid composite (Z-250). The bonded interfaces of the sectioned specimens were observed using a scanning electron microscopy (SEM). The polymerization shrinkage and modulus of elasticity of the composites were measured to find out the effect of physical properties of composite resins on the cuspal deflection. The results were as follows. 1. The amounts of cuspal deflection restored with Filtek flow or Z-250 were $2.18\;{\pm}\;0.92{\mu}m$ and $2.95\;{\pm}\;1.13\;{\mu}m$, respectively. Filtek flow showed less cuspal deflection but there was no statistically significant difference (p > 0.05). 2. The two specimens in each group showed gap at the inner portion of the cavity. 3. The polymerization shrinkages of Filtek flow and Z-250 were 4.41% and 2.23% respectively, and the flexural modulus of elasticity of cured Filtek flow (7.77 GPa) was much lower than that of Z-250 (17.43 GPa). 4. The cuspal deflection depends not only on the polymerization shrinkage but also on the modulus of elasticity of composites.