• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.709-719
• /
• 2010

As the world has had a high recognition of security since 9/11 attacks in 2001, many countries and international organizations around the world are making strenuous efforts in establishing stronger security, centering on areas with high possibility of terrorist attacks. In particular, harbor facilities where a great deal of trade take place between countries, have high possibilities of becoming the objects of terrorist attacks and also of becoming places of trading objects and illegal items which might be leveraged for terror attacks. In this study, I have explained the current status of the harbor entrance system through existing documents, interviews and field trips to harbors and have also introduced improvement measures using RFID technology from the viewpoint of BP(Business Process). I expect that this study will be used as basic materials because I have studied the number of people entering harbors and working procedures for vehicle entrance, which have not been studied so far and also laid out various factors to be considered to introduce RFID technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.478-484
• /
• 2013

Recently, the risk of safety accidents in the coastal zone has been increased due to revitalization of marine leisure and tourism. Because of a lack of regulations about technical and maintenance aspect for safety facilities, the effective measures to prevent safety accidents in the coastal zone have not taken with increasing rate of the accidents. The nature of land/sea and behavioral characteristics of a fisherman/port laborer/tourist/people at leisure should be taken into account properly when safety facilities to prevent safety accidents in the coastal zone are installed, since the characteristics of land/sea and many activities such as fishery, harbor works, tour, leisure are mixed in the geographic and environmental condition of the coastal zone. This study analyzes the current problems on the safety facility in the domestic coastal zone through the domestic and foreign(Hongkong, Macau) field survey. Also the direction of the improvement about the safety facility are proposed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.6
• /
• pp.533-546
• /
• 2007

This paper studied the design VE (Value Engineering) process among the various methods to satisfy the requirement of user and cost saving in the overall redesign process for the Turn-key base construction project. This study has been estabilished the rational and practical analysis process with the stepwise by using the design VE process. The efficiency and safety were verified with the adoptian of computer simulation to cope with the problem of initial analysis and verification for design VE process in the large construction project. In the previous design VE process, there is a limitation for the analysis of design VE in the planing stage and the execution time period of the large construction project. The previous application of VE technique was only for the construction of harbor facilities, so there was no contribution of cost saving in the function and construction. However, this paper proposed the selection methodology of VE items and hence the redesign VE process can be efficiently improved. It can be also improved the process of functional analysis rationally and practically. About 4.6 billion won has been saved with applying to the harbor construction project with using the VE method proposed in this paper. The study gives the direction of VE to be accomplished efficiently in the similar project.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.340-341
• /
• 2007

In case of Busan Port container terminals scale of a yard device chapter is small and narrow, and redundant works of device chapter facilities ability and transfer cranes are misgovernment occurring very much bemuse of this There is to the misgovernment that cannot support design ability of a container crane of quay because of this There is this in a change of marine transportation harbor environment to cross over to a large easel next of a ship, and a large problem cannot but become. Watched how redundant works were occurring in the second yards, and presented a problem Also, present the hint point tint these redundant works analyze how productivity of quay productivity and container crane is improved if solution works, and face to this.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.453-458
• /
• 2018

The analysis of maritime traffic refers to the processes that are used to analyze the environmental characteristics of the target area and, based on this analysis, predict the traffic pattern of the vessels. In recent years, maritime traffic analysis has become significant with increase maritime traffic volume and expansion of VTS coverage area. In addition, maritime traffic analysis is also applicable in the safety assessment of port facilities and the VTS (Vessel Traffic Service). In this paper, we propose a method to analyze the vessels' traffic pattern by using the heat map and the centroid method. This method is efficient for the analysis of the vessel trajectory data where spatial characteristics change with time. In the experiments, the traffic density and centroid by time have were analyzed. Trajectory data collected at Mokpo harbor was adopted. Finally, we reviewed the experimental results to verify the feasibility of the proposed method as a maritime traffic analysis method.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.499-506
• /
• 2015

To analyze the port choice hierarchy, factorial and AHP analysis were conducted based on the survey for shippers using west coastal ports. As the result of analysis with 17 factors, 6 main factors; port service, port operation and geographical condition, connectivity to hinterland, port cost, accessibility and facilities were chosen. Based on this, AHP and correlation analysis of each factor were conducted. And the results were shown as cost, service, facility, connectivity, accessibility and operation in order. In addition, several ways for incentive program, the most important factor based on AHP analysis, to influence shippers around west coastal port were reviewed. As the result of review for the incentive program of domestic container ports, it was shown that three ports, Gun-san, Dae-san and Mok-po, offer incentive to shipper while two ports, Pyeong-tak and Dang-jin, do not. Therefore, the former three ports need to reinforce the existing incentive program while the latter ones introduce it.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.569-576
• /
• 2008

By the development of international trade in last decades, Korean International Trade has been grown rapidly and Korean Port and Port facilities have been improved stimultaneously: finally volume of the marine traffic increased rapidly. Presently, 15 VTS centers have serving in Korean waters and since the introduction of the first VIS Center in Korea there is no quantitative analysis to find workload of VIS operator. After that Port-MIS and De-brief data have been gathered for 7 days and inbound-outbound vessels time-g/t table prepared and traffic volume examined for each V1S center. Hence $L^2$ conversion traffic volume and dangerous vessel ratio obtained Later on conversion controlled number obtained by denoting ratio 1.0 to directly controlled vessels by VTSO and denoting ratio 0.3 to indirectly controlled vessels by VTSO. Traffic volume, large vessel ratio, dangerous vessel ratio, dimension of VTS controlled area, marine accident occurrence frequency and communication volume of comm. log can be counted as a factor which influence to workload of VTSO. All those factors have been examined and analyzed. Finally, ship's size and dangerous vessel ratio have been chosen to derive the Number of composite conversion control for workload formula.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.2
• /
• pp.1-13
• /
• 1996

Most of the ShipHandling Simulators of full-mission-bridge system need vast area to install and even PC-based maneuvering simulators are often equipped with Steering Wheel or Engine Telegraphe etc. of data input interface, which necessarily makes the user face with excessive financial burden. These have been one of the obstacles for the officers, captains, pilots and students in access to maneuvering simulation whenever they want to try it in advance prior to actual ship maneuvering. Subsequently, all the officers and captains come to have little chances to train themselves until they arualified as a pilot after a long period of time of realship maneuvering practice on board, which means they have to control they have to control their own ship at sea without clear understanding on her maneuverability when they are forced to do it on the way. And these lack of capability for maneuvering have used so often to result in marine casualties of collision with other ships or pier facilities while maneuvering in harbor. To prevent those accidents by means of enhancing their maneuvering ability, PC-based DeskTop Simulator that allows anyong to access readily at anytime is needed and in conformation to such demand this simulator has been developed. The Software this simulator written in Turbo Pascal Ver. 5.0 has adopted MMG mathmatical model theoretically in part and also it was designed to make it possible that all numeric data inputs and outputs with graphic presentation for maneuvering operation be carried out just only with keyboard and monitor console. With the Simulation software, all the officers, captains, pilots and even students who has a proper computer at hand are expected to be able to make an attempt to simulate the maneuvering of their ownship or any other types of them at any port in which they want to do it.

• Journal of Korea Port Economic Association
• /
• v.29 no.4
• /
• pp.247-264
• /
• 2013

QR Code can save much more information than 1D Bar Code and encode various types of information. As it takes less general cost than high priced RFID, it can be recognized through smart-phone without any special facilities. Despite these strengths, QR Code is just used by general people for their daily life service, while 1D Bar Code is applied in all kinds of industry like sales, distribution, production management, quality management and so on. And RFID is also used in many industrial field like harbor and distribution area. The range of QR Code's usage is getting broad but still restrictive. So it is required to make new organized system. Therefore, this research suggests that Applying QR Code in the SCM. Connecting QR Code with SCM, it secures space for data's movement. And it helps not only rise the speed and accuracy of data flow but also reduce logistical cost.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.5
• /
• pp.67-75
• /
• 2014

In this study, the large-scale hydraulic model test was performed to investigate the hydraulic characteristics for development of the non-power soil cleaning and keeping system at the dike gate. The outlet height, outflow number, outflow discharge, and outflow cycle were compared and analyzed. The non-power soil cleaning and keeping system was most effective at 11.2 mm in the outlet height. And then the mean outflow cycle was 1.09 sec, and the mean outflow discharge was $0.00164m^3/s$. The total outflow number increased gradually as the water level of a water tank increased, and the outlet height decreased. As a level of water tank decreased, the mean outflow cycle was lengthened, and the unit outflow discharge increased. This result showed this system was most effective. To remove the silty clay deposited in facilities, the methods of excavation, dredging, high pressure washing, etc have been applied to the tidal facilities such as land reclamation, a small size fishing port, and a harbor for maintenance. However, this is extremely cost-ineffective, whereas the non-power soil cleaning and keeping system will bring about an enormously positive economic effect. In addition, when the non-power soil cleaning and keeping system is applied to the dike gate of land reclamation, a thorough examination of the local tidal data and the careful system planning are required to prevent the disaster damage caused by flooding.