• 한국토양비료학회지
• /
• 제44권3호
• /
• pp.415-424
• /
• 2011

This research was conducted to verified the effectiveness of a sintered porous media coated with organic matter as nutrient source and microorganisms as decomposer effective in TPH decomposition for a closed-typed biopole system. The organic matter content in the sintered porous media which was developed with bentonite increased with increasing dilution ratio of pig slurry and the sintered porous media as well as decrease in the particle size of sintered porous media. The decomposition rate of TPH was significantly increased with increasing aeration than that under atmospheric condition. Also the sintered porous media containing organic matter and microorganisms proved that the decomposition was enhanced with addition of nutrients sources in addition to aeration periodically.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.585-590
• /
• 2003

The distributions of mass flow rate and pressure are major factors to deside the performance of a proton exchange membrane fuel cell (PEMFC). These factors are affected by channel configuration of air plate. In this paper. structural analysis is performed to investigate deformation of porous media. Two kind of models are suggest for flow analyses. Deformed porous media and undeformed porous media are considered for air plate model. The Numerical flow analysis results with deformed porous media and undeformed porous media had some discrepancy in pressure distribution. The pressure and velocity in a working condition are numerically calculated to predict the performance of the air plates. Distributions of the parameters in the PEMFC are analyzed numerically under steady-state conditions.

• Wind and Structures
• /
• 제9권2호
• /
• pp.147-158
• /
• 2006

The purpose of this paper is to find a more accurate method to evaluate pedestrian wind by computational fluid dynamics approach. Previous computational fluid dynamics studies of wind environmental problems were mostly performed by simplified models, which only use simple geometric shapes, such as cubes and cylinders, to represent buildings and structures. However, to have more accurate and complete evaluation results, various shapes of blocking objects, such as trees, should also be taken into consideration. The aerodynamic effects of these various shapes of objects can decrease wind velocity and increase turbulence intensity. Previous studies simply omitted the errors generated from these various shapes of blocking objects. Adding real geometrical trees to the numerical models makes the calculating domain of CFD very complicated due to geometry generation and grid meshing problems. In this case the function of Porous Media Condition can solve the problem by adding trees into numerical models without increasing the mesh grids. The comparison results between numerical and wind tunnel model are close if the parameters of porous media condition are well adjusted.

• 대한기계학회논문집B
• /
• 제21권12호
• /
• pp.1668-1678
• /
• 1997

Numerical analyses were performed to investigate the characteristics of regenerator in oscillating flow by using moving boundary method and Darcy model. In this work, periodic adiabatic boundary condition was suggested as the boundary condition of adiabatic part so that the effects of the thermal inertia of the wall could be considered. In carrying out numerical analyses, two models were applied and compared. One called isotropic model has the same thermal conductivity in radial and axial directions within a porous media. The other called aeolotropic model has different conductivity in each directions. Isotropic model could not show the advantage of energy reduction which needs to maintain constant wall temperature difference between heater and cooler. But aeolotropic model could simulate the reduction of energy consumption.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.877-884
• /
• 2004

In this paper, structural analysis is performed to investigate the deformation of porous media in a proton exchange membrane fuel cell (PEMFC). Structural deformation of air plate of the fuel cell causes the change in configuration and cross sectional area of the channel. The distributions of mass flow rate and pressure are major factors to decide the performance of a PEMFC. These factors are affected by channel configuration of air plate. Two kinds of numerical air plate models are suggested for flow analyses. Deformed porous media and undeformed porous media are considered for the two models. The Numerical flow analysis results between deformed porous media and undeformed porous media have some discrepancy in pressure distribution. The pressure and velocity distribution under a working condition are numerically calculated to predict the performance of the air plates. Pressure and velocity distributions are compared for two models. It is shown that structural deformation makes difference in flow analysis results.

• 한국항공우주학회지
• /
• 제32권3호
• /
• pp.22-29
• /
• 2004

박막연의 변형은 고분자 전해질 연료전지의 성능에 상당한 영향을 미친다. 탄소공기판의 응력 분포는 고분자 전해질 연료전지의 안정성과 작동 효율의 중요변수이다. 본 논문에서는 작동 조건에서의 공기판과 박막면의 구조해석을 수행하였다. 박막면의 구조적 변형은 연료전지의 변수들의 분포에 영향을 미친다. 본 연구에서는 두 가지 모델에 대한 해석을 수행하였다. 한가지는 박막면의 물성치를 비선형으로 가정한 것이고, 나머지 한가지는 박막면의 물성치를 비선형으로 가정하고 공기판과 박막면의 접촉면에 접촉 조건을 적용한 경우이다. 이 두 가지 경우에 대해서 해석해본 결과 각각의 응력과 변형율의 분포에서 차이가 있음을 알 수 있었다. 이 결과를 통해 연료전지의 연구에서 비선형 접촉 해석이 필요함을 알 수 있다.

• 환경영향평가
• /
• 제18권2호
• /
• pp.79-87
• /
• 2009

This study was performed for the application of porous concrete blocks and aquatic plants for the water purification in small urban stream. This study investigated the ability of water purification according to various environments, algae and aquatic plants. When the porous concrete was used as contact media, the average removal efficiencies of SS, BOD and COD were 85~95%, 50~60% and 65~75%, respectively. Also, when the porous concrete and aquatic plants was used the average removal efficiency of SS, BOD and COD were 90~95%, 60~70% and 70~80%, respectively. As the results, average removal efficiency of total nitrogen, at the condition of the porous concrete and aquatic plants, was about 40-50%, then, that of total phosphorus was about 60-70%.

• 연구논문집
• /
• 통권23호
• /
• pp.5-13
• /
• 1993

The present work deals with the theoretical prediction of static & dynamic characteristic of annular type externally pressurized thrust air bearings with metal-sintered porous media. For the evaluation of surface loading effect by machining, it is assumed that the flow at the porous surface is dominant and which is equivalent to the flow through orifice. Finite different method with over-relaxation method is used to solve the numerical problems. The influences of radius ratio, supply pressure and squeeze number on performances are investigated, as the results. The results of this study can be used to predict the optimal running condition and stable realm of porous bearings.

• 대한기계학회논문집A
• /
• 제21권5호
• /
• pp.850-858
• /
• 1997

A new a posteriori error estimator is introduced and applied to variational inequalities occurring in problems of flow through porous media. In order to construct element-wise a posteriori error estimates the global error is localized by a special mixed formulation in which continuity conditions at interfaces are treated as constraints. This approach leads to error indicators which provide rigorous upper bounds of the element errors. A discussion of a compatibility condition for the well-posedness of the local error analysis problem is given. Two numerical examples are solved to check the compatibility of the local problems and convergence of the effectivity index both in a local and a global sense with respect to local refinements.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.979-990
• /
• 1989

본 연구에서는 종횡비가 1보다 크고 내부 벽면에 일정한 열유속을 가지고 외부벽은 등온으로 유지되며 나머지 벽은 단열된 수직환형 원통형에 대한 연구를 바탕으로 같은 경계조건으로 종횡비를 1이하로 감소할 때에 Darcy의 법칙을 기초로 유한차분법을 사용, 수치적으로 해석하여 다세포 유동의 존재 여부와 온도 분포 및 열전달율을 계산하였다.