• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.66-67
• /
• 1994

Polysulfone은 물리적, 화학적 성질이 우수하고 내열성과 내유기용매성등이 우수한 열가소성 수지로서 투과성능도 좋고 배제율도 높아 한외여과막이나 역삼투막, 기체분리막 등에 널리 이용되고 있다. 그러나 소수성 물질이기 때문에 처리과정에 있어서 fouling 발생이 큰 문제점으로 대두되고 있다. 따라서 이러한 fouling 현상을 억제하기 위해 화학적인 개질을 통하여 친수성을 높히는 방법이 필요하다. 본 실험에서는 친수성 고분자를 얻기 위하여 $-R_3N^+$기를 치환을 통하여 도입하였다. quaternary polysulfone의 치환여부를 확인하기 위하여 NMR, FT-IR를 이용하였고, 투과도와 용질배제율을 측정하여 개질의 효과를 살펴 보았다. 그리고 이온반발력을 이용하여 염료용액의 배제율을 향상시킬 수 있었다.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.437-443
• /
• 2003

A series of alternating and alternating block copolycarbonates containing the constituent groups of polysulfone was synthesized through a multi-step solution condensation method. For the regulation of block length, monodisperse oligomers were prepared by using a large excess of the bisphenols and were subsequently incorporated into the copolymer chains. Separating the unreacted bisphenols from the oligomers by dissolution/precipitation steps took advantage of solubility differences. The structures of the monomers, oligomers, and copolymers were characterized and confirmed by GPC, NMR spectroscopy, mass spectrometry, and elemental analysis. Monodispersity of the oligomers, which is critical for control over the block length in the copolymers, was confirmed by GPC and mass spectrometry. Of the two constituent groups of the polysulfone, the sulfone linkage stiffens the polycarbonate copolymer chain, while the ether linkage softens it.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.119-126
• /
• 1999

본 연구는 polysulfone 막을 표면처리 하여 오일 폐수를 한외여과 처리하였고 이때 fouling의 감소효과를 실험하였다. 고분자나 계면활성제를 polysulfone막에 흡착시켜 표면처리를 하였다. 다양하게 표면처리된 막으로 dodecane(0.1 v%)/물 에멀젼과 dodecane-계면활성제/물 에멀젼을 회분식 실험방법으로 수행하였다. SDS로 개질한 막으로 dodecane-계면활성제/물 에멀젼을 환외여과 처리하였을 때 fouling이 가장 작게 나타났고, 재사용에 좋은 방법으로 나타났다.

• Membrane and Water Treatment
• /
• v.4 no.2
• /
• pp.83-93
• /
• 2013

In the present investigation, were synthesized composite membranes prepared by simultaneous casting of two polymer solutions using the technique of phase inversion by immersion / precipitation. The support layer was prepared using polyethersulfone and polysulfone as base polymer and for the top layer was used sulfonated polysulfone (SPSU) with 50% sulfonation degree. The morphology of the resulting membranes were characterized by scanning electron microscopy (SEM). The final results showed that it is possible to prepare composite membranes by simultaneous casting of two polymer solutions with adherence between the two layers. Regarding the permeation tests, the developed membranes presented values of hydraulic permeability within the range of commercial nanofiltration (NF) membranes. Values rejection of 80% ammonium ions can be increased by using a SPSU with a greater degree of sulfonation.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.10b
• /
• pp.49-51
• /
• 1999

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.11a
• /
• pp.71-74
• /
• 2001

• Membrane Journal
• /
• v.19 no.2
• /
• pp.150-156
• /
• 2009

To improve the permselective efficiency of polysulfone membranes, the bromination was performed and then the resulting membranes were investigated in terms of membrane structures and gas transport characteristics. The brominated Polysulfone membranes were characterized by FT-IR, 1H-NMR, TGA, contact angle measurements, and gas permeation measurements were accomplished with He, $N_2,\;CO_2\;and\;O_2$. In general, the permeation rates were reduced while the selectivities increased as the bromination progressed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1451-1452
• /
• 2011

• Membrane Journal
• /
• v.22 no.3
• /
• pp.224-233
• /
• 2012

To improve permeation performance of gas separation membrane, polysulfone hollow fiber membrane was prepared by wet-dry phase inversion method using Triton X-100 as non-ionic additive. And variation of gas permeation behavior by additive was investigated. Various spinning conditions such as air gap, concentration of polymer, dope tank temperature were controlled and these effects were studied. The morphology and gas permeation property of hollow fiber membranes were investigated using scanning electron microscope (SEM) and bubble flow meter respectively. We confirmed that the membranes added with Triton X-100 had a smooth external skin at various air gap length conditions. The macrovoids of these hollow fiber membranes were more developed with increase of air-gap from 4 to 90 cm and that induced higher permeance. The permeance of polysulfone membranes has the higher value at comparatively lower concentration polymer (30 wt% polysulfone) and lower concentration of additive (15 wt% Triton X-100). When temperature in dope tank was controlled, the membranes prepared at $100^{\circ}C$ showed low permeance because of volatilization of additive and solvent.

• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.671-678
• /
• 2015

The adsorption characteristics of Sr and Cs ions were investigated by using PS-zeolite beads prepared by immobilizing zeolite with polysulfone (PS). The adsorption kinetics of Sr and Cs ions by PS-zeolite beads was described well by the pseudo-second-order model. The maximum adsorption capacities of Sr and Cs ions calculated from Langmuir isotherm model were 65.0 mg/g and 76.4 mg/g, respectively. In the binary system of Sr ion and Cs ion, the adsorption capacities of each ion decreased with increasing mole ratio of mixed counterpart ion, and Cs ion showed the higher hinderance than Sr ion. We found that thermodynamic properties of Sr and Cs ions on absorption reaction were spontaneous and endothermic at 293 to 323 K.