• Composites Research
• /
• 제23권3호
• /
• pp.50-57
• /
• 2010

섬유 보강 시멘트계 복합재료의 성능 예측 및 평가에 있어서 중요한 영향을 미치는 섬유 분포 특성을 정량적으로 평가하기 위해서는 복합재료의 단면 이미지에서 섬유를 정확히 검출하여야 한다. 이 논문은 형광원리를 이용하여 합성섬유를 매트릭스로부터 개별적으로 검출하기 위한 기초 연구로써 섬유 보강 시멘트계 복합재료 중의 하나인 ECC에 일반적으로 사용되는 PVA 섬유, PET 섬유, PE 섬유, 그리고 PP 섬유의 형광특성을 분석하였다. 또한 하이브리드 된 경우 합성섬유들 간의 상대 형광 광도값의 차이를 비교하여 종류별로 구분하기 위한 최적의 파장대를 선정하였으며, 그 파장대에서 두 분류대상을 구별할 수 있는 최적의 경계값을 통계적 방법을 이용하여 산출하였다. 또한 형광 현미경을 이용하여 각 섬유를 촬영하여 상대적인 밝기값을 비교하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.145-146
• /
• 2023

In this study, the effect of hybrid fiber reinforcement on the residual strength and impact resistance of high-strength cementitious composites exposed to high temperatures was investigated. A cementitious composites was manufactured in which 0.15 vol% of polypropylene fiber (PP) and 1.0 vol% of smooth steel fiber (SSF) were double-mixed, and a residual strength test was conducted while thermal stress was applied by heating test, and then a high-velocity impact test was performed. In the case of general cementitious composites, the rear surface is damaged due to explosion and low tensile strength during high temperature or impact, while hybrid fiber reinforced cementitious composites can repeatedly absorb and distribute stress until multiple fibers are damaged to suppress the propagation of impact and resistance to explosion. Therefore, this study analyzed the residual strength of cementitious composites exposed to high temperatures depending on whether hybrid fibers were mixed or not, and collected research data on fracture behavior through high-speed impact tests to evaluate impact resistance and mechanical properties.

• 한국화재소방학회논문지
• /
• 제33권1호
• /
• pp.69-75
• /
• 2019

본 연구에서는 5종의 섬유강화플라스틱(Fiber Reinforced Plastic, FRP), 폴리스티렌(Polystylene, PS), 폴리카보네이트(Polycarbonate, PC), 폴리프로필렌(Polypropylene, PP), 폴리염화비닐(Polyvinyl chloride, PVC) 판을 콘칼로리미터(Cone calorimeter, ISO 5660)를 이용하여 연소성을 시험하였다. 그 결과 PVC판은 최대열방출률($HRR_{peak}$)이 $44.65kW/m^2$, 최대평균열방사율(MARHE)이 $30.97kW/m^2$로 가장 낮게 나타났고, PS판은 $HRR_{peak}$은 $773.44kW/m^2$, MARHE는 $399.14kW/m^2$으로 가장 높게 나타났다. 일산화탄소의 평균($CO_{mean}$) 발생량은 PC판과 PS판이 최대 3.88배로 가장 많이 발생하였고, 반대로 이산화탄소($CO_{2mean}$)의 평균 발생량은 PS판과 PP판이 최대 4.88배로 가장 많이 발생하였다. 또 PS판은 다른 플라스틱보다 연기성능지수(SPI)가 74.81%~95.99% 감소하였고, 연기성장지수(SGI)는 76%~300%, 연기강도(SI)는 917.73%~9607.57% 증가하여 연기위험성이 높다는 것을 알 수 있었다. 따라서 PS판은 열적 측면에서나 연기 측면 모두 연기로 인한 인명피해의 위험성이 가장 높았음을 알았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.387-390
• /
• 2005

Recently, in order to reduce the spalling of high strength concrete under fire, the addition of organic fibres to high strength concrete has been investigated. In this study, the effect of organic fibre content on the spalling of high strength concrete was experimantally investigated. Two types of fibre, polypropylene(PP) and polyvinyl alcohol(PVA) fibres, were selected, and three water/binder ratios were selected, which were W/B $30\%,\;24.\%,\;and\;16\%$, respectively. As a result, it appears that as the concrete strength increases, the fiber content for prevention spalling increases. When W/B ratios are $30\%,\;24.9\%$, the additions of $0.1vol.\%$ and $0.2vol.\%$, respectively, appear to avoid the spalling in this study.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1671-1676
• /
• 2015

폴리-L-유산 (PLLA)/폴리-D-유산(PDLA)의 스테레오컴플렉스(SC) 특유의 결정 거동은 PLLA/PDLA의 블렌드의 특정한 용융 조건에서 나타난다. 이를 적용하여 PLA 스테레오컴플렉스를 제조하기 위해 전반적인 조성에서 PLLA와 PDLA를 블렌드 하였다. 또한 충격 강도와 열변형온도 같은 기계적 물성 및 열적 특성을 향상시키기 위해 충격보강제, 탈크와 유리섬유(GF) 등의 보강제를 첨가하였다. 그 결과로 열변형 온도가 $115^{\circ}C$ 에서 관찰 되는 조성의 복합재를 제조하였다. 더 경제적인 방법으로, PLLA와 상용화된 폴리프로필렌(PP)을 전반적인 조성에서 블렌드 하였다. 그 결과, 특정 조성에서 상용화된 PP/탈크 복합재와 ABS에 적용시킬 수 있는 물성을 나타내었다. 이러한 결과는 PP와 PLLA같은 매트릭스 수지에 유리섬유 및 충격보강제를 잘 분산시키는 것에서 기인하는 것으로 판단된다.

• Composites Research
• /
• 제28권3호
• /
• pp.112-117
• /
• 2015

Mechanical properties of nonwoven alfa fiber based reinforced biocomposite were evaluated to assess the possibility of using it as a new material in engineering applications such as orthopedic application. Samples were fabricated by needle punching, thermal bonding and Hydroentanglement, by blending alfa fibers with wool fibers or Polypropylene fibers. The mechanical properties were tested and showed that the nonwoven NW3 (alfa fiber/PP/PLA, with hydroentanglement) is the best. It has a value of stress at break of 1.94 MPa, a strain of 54.2% and a young's module of 7.95 MPa, in a production normal direction. A biocomposite has been made with NW3 mixed with PMMA matrix. The use of nonwoven based alfa fiber in reinforcing the composite material increases its rigidity and the tensile strength; the elongation was found to be 1.53%, the Young's Module of 1.79 GPa and the tensile at break of 15.06 MPa. Results indicated that alfa fibres are of interest for low-cost engineering applications and can compete with glass fibres in orthopedic application.

• 한국지반신소재학회논문집
• /
• 제16권1호
• /
• pp.19-29
• /
• 2017

시멘트-점토-모래 혼합토의 휨성능 개선을 위하여 합성섬유를 이용해서 보강한 섬유보강토에 대한 휨성능 시험을 실시하였다. 시멘트, 모래, 그리고 섬유가 혼합토의 휨성능에 미치는 영향을 평가하기 위하여 시멘트량(15%, 20%, 25%), 모래함량(0%, 10%, 20%), 섬유의 종류(PP, PVA)와 길이(6mm, 12mm), 섬유혼입량(0.5%, 1.0%, 1.5%)을 조합하여 시험편을 제작하였다. 본 연구의 결과 시멘트 개량토를 섬유를 이용해서 보강하면 휨강도와 휨인성이 개선되는 효과를 확인할 수 있었다. 휨성능 시험 결과에 대한 다중선형회귀분석 결과 시멘트량과 모래함량은 휨강도에 영향을 미치는 주요 인자인 것으로 나타났고, 반면에 섬유혼입량은 균열발생 후의 거동에 영향을 미치는 주요 인자인 것으로 나타났다.

• Macromolecular Research
• /
• 제16권1호
• /
• pp.21-30
• /
• 2008

Based on the sheath-core bicomponent composite fibers with modified polystyrene (PS) and the modified polypropylene (PP), composite fibers obtained were further cross-linked and sulphonated with chlorosulphonic acid to produce strong acidic cation ion exchange fibers. The structures of the fibers obtained were characterized using Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC) etc. The optimal technology of the fibers obtained is discussed. The static absorption capacity of the sheath-core bicomponent composite cation exchange fibers for $Zn^{2+}$, $Cu^{2+}$ was determined. The absorption kinetics and major factors affecting the absorption capacities of $Zn^{2+}$, $Cu^{2+}$ were studied, and its chemical stability and regenerating properties were probed. The results suggest that cation exchange fibers with better mechanical properties and higher exchange capability were obtained. Moreover, this type of ion exchange fiber has good absorption properties and working stability to various metal ions. Hence, they have higher practicability.

• 한국자동차공학회논문집
• /
• 제22권6호
• /
• pp.9-13
• /
• 2014

Glass fiber reinforced thermoplastics(GFRTP) is made by adding chemical additive to glass fabric which is strong at a high temperate, incorrodible, and good at intensity and specific gravity. Although we focused on the weight lightening, the intensity of GFRTP is also important. To remedy thermoplastic resin's inferior property of matter to thermo-hardening resin, we formed several specimen, differing the chemical additive as Homo PP, MAPP 3%, Rubber 5%, and mixed. We put pressure of 5 type on the specimens. The analyses result for the different pressure, the resin spreads evenly, then the coherence is increased. Eventually, the mechanical properties are changed. When high intensity is needed, it is good idea to use polypropylene(PP) which has good coherence with glass fabric as chemical additive. We can get better intensity when we form the resin at the optimum pressure depending on mixing of chemical additive and glass fabric than when we increase the pressure.

• Carbon letters
• /
• 제20권
• /
• pp.39-46
• /
• 2016

In this work, the effects of maleic anhydride (MA) content on mechanical properties of chopped carbon fibers (CFs)-reinforced MA-grafted-polypropylene (MAPP) matrix composites. A direct oxyfluorination on CF surfaces was applied to increase the interfacial strength between the CFs and MAPP matrix. The mechanical properties of the CFs/MAPP composites are likely to be different in terms of MA content. Surface characteristics were observed by scanning electron microscope, Fourier transform infrared spectroscopy, and single fiber contact angle method. The mechanical properties of the composites were also measured by a critical stress intensity factor (K_IC). From the K_IC test results, the K_IC values were increased to a maximum value of 3.4 MPa with the 0.1 % of MA in the PP, and then decreased with higher MA content.