• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.423-432
• /
• 1999

This paper proposes a 12­pulse diode rectifier system with low kVA components suitable for powering switch mode power supplies or ac/dc converter applications. The proposed 12-pulse system employs a polyphase transformer, a zero sequence blocking transformer (ZSBT) in the dc link, and an interphase transformer. Results produce near equal leakage inductance in series with each diode rectifier bridge ensuring equal current sharing and performance improvements, The utility input currents and the voltage across the ZSBT are analyzed the kVA rating of each component in the proposed system is computed. The 5th , 7th , 17th and 19th harmonics are eliminated in the input line currents resulting in clean input power. The dc link voltage magnitude generated by the proposed rectifier system is nearly identical to a conventional to a conventional 6-pulse system. The proposed system is suitable to retrofit applications as well as in new PWM drive systems. Simulation and experimental results from a 208V , 10kVA system are shown.

• Journal of Biomedical Engineering Research
• /
• v.28 no.6
• /
• pp.803-810
• /
• 2007

Although synthetic aperture focusing techniques can improve the spatial resolution of ultrasound imaging, they have not been employed in a commercial product because they require a real-time N-channel beamformer with a tremendously increased hardware complexity for simultaneous beamforming along M multiple lines. In this paper, a hardware-efficient beamformer architecture for synthetic aperture focusing is presented. In contrast to the straightforward design using NM delay calculators, the proposed method utilizes only M delay calculators by sharing the same values among the focusing delays which should be calculated at the same time between the N channels for all imaging points along the M scan lines. In general, synthetic aperture beamforming requires M 2-port memories. In the proposed beamformer, the input data for each channel is first upsampled with a 4-fold interpolator and each polyphase component of the interpolator output is stored into a 2-port memory separately, requiring 4M 2-port memories for each channel. By properly limiting the area formed with the synthetic aperture focusing, the input memory buffer can be implemented with only 4 2-port memories and one short multi-port memory.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.641-647
• /
• 2015

In this paper, Analyzed the multi-channel signal processing algorithms for digital-transponder. To analyze suitable multi-channel signal processing algorithms, compare algorithms about four criteria. Four criteria are as follows, perfect reconstruction, interference rejection, resource usage and power consumption. Analysis for each algorithm in accordance with these four criteria. then propose the multi-channel signal processing algorithms for digital satellite communication system.

• Journal of Communications and Networks
• /
• v.12 no.6
• /
• pp.544-557
• /
• 2010

This paper addresses the problem of controlling the envelope's power peak of single carrier modulated signals, band limited by root-raised cosine (RRC) pulse shaping filters, in order to reduce power amplifier back-off for very small aperture terminals ground stations. Magnitude modulation (MM) is presented as a very efficient solution to the peak-to-average power ratio problem. This paper gives a detailed description of the MM concept and its recent evolutions. It starts by extending the look-up-table (LUT) based approach of the MM concept to M-ary constellations with M ${\leq}$ 16. The constellation and RRC symmetries are explored, allowing considerable reduction on LUT computation complexity and storage requirements. An effective multistage polyphase (MPMM) approach for the MM concept is then proposed. As opposed to traditional LUT-MM solutions, MM coefficients are computed in real-time by a low complexity multirate filter system. The back-off from high-power amplifier saturation is almost eliminated (reduction is greater than 95%) with just a 2-stage MPMM system even for very demanding roll-off cases (e.g., ${\alpha}$ = 0,1). Also, the MPMM is independent of modulation in use, allowing its easy application to constellations with M > 16.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1E
• /
• pp.41-48
• /
• 1997

The very purpose of subband codec is the attainment of data rate compression through the use of quantizer and optimum bit allocation for each decimated signal. Yet the question of floating-point quantization effects in subband codec has received scant attention. There has been no direct focus on the analysis of quantization errors, nor on design with quantization errors embedded explicitly in the criterion. This paper provides a rigorous theory for the modelling, analysis and optimum design of the general M-band subband codec in the presence of the floating-point quantization noise. The floating-point quantizers are embedded into the codec structure by its equivalent multiplicative noise model. We then decompose the analysis and synthesis subband filter banks of the codec into the polyphase form and construct an equivalent time-invariant structure to compute exact expression for the mean square quantization error in the reconstructed an equivalent time-invariant structure to compute exact expression for the mean square quantization error in the reconstructed output. The optimum design criteria of the subband codec is given to the design of the analysis/synthesis filter bank and the floating-point quantizer to minimize the output mean square error. Specific optimum design examples are developed with two types of filter of filter banks-orthonormal and biorthogonal filter bank, along with their perpormance analysis.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.1-8
• /
• 1999

In this paper, new polyphase sequences and a sequence generation method are suggested. These sequences are found to have good correlation properties. Since the suggested generation method consists only of integer sums and modular techniques, sequence generation is also easy. The performance of the sequences is investigated when used in QS-CDMA systems under frequency selective, time nonselective, slow Nakagami fading channel with additive white Gaussian noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.423-434
• /
• 1989

In this paper, a PRS transmission system using TMRCP as the unit pulse is proposed, which solves the problems occur when the PRS method will be applied to the digital transmultiplexer for each channel. And a design technique which uses this PRS method for the FFT polyphase filter transmultiplexer concept is given. TMRCP-PRS signal require a bandwidth about 2.5KHz(including some guard-band) for a 4-KHz bandlimited voice channel. Therefore, in he 24 channel transmission line, it gives the same advantages as he ordinary PRS system and sloves the inter-channel interference problems. And its good speed-tolerance reduces the time-errors by the environments and the power loss, so it makes the system to be stable. The total system, however, attaces the filters for PCM-PRS, PRS-PCM conversion before and after the transmultiplexer respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.318-323
• /
• 2006

In this paper we propose three methods to generate short hopping sequences for the frequency hopping system. First, we explain the one coincidence set of sequences and the polyphase power residue seqences which have been known previously, and we suggest a method by modifying the one coincidence sequence and two methods by using the power residue sequences. We verify that the optimal position deleted-power residue sequences have the best Hamming autocorrelation property and the first position deleted-power residue sequences and the modified one coincidence sequences follows with respect to Hamming autocorrelation. We also explain that these sequences have the good balance property and can be implemented with low complexity.

• Economic and Environmental Geology
• /
• v.15 no.1
• /
• pp.1-16
• /
• 1982

Many skarn type iron ore deposits are distributed in Kimhae-Mulgeum area of Gyeongnam Province. Integrated field, mineralogic, geochemical and fluid inclusion studies were undertaken to illustrate the character and origin of the ores in this area. The iron ore deposits in this area are NS or NNE trending fracture filling magnetite veins which are developed in andesitic rocks near the contact with late Cretaceous micrographic granite bodies. Symmetrically zoned skarns are commonly developed in the magnetite veins of this area. Zoning of skarn from center to margin of the vein are as follows; garnet quartz skarn-epidote skarn-epidote orthoclase skarn-altered andesitic rocks. Major ore mineral is magnetite and small amount of hematite, pyrite, pyrrhotite, chalcopyrite and sphalerite are associated. Vein paragenesis reveals four depositional stages; 1) skarn stage, 2) iron sulfide and oxide stage, 3) skarn stage, 4) sulfide stage Minute halite-bearing polyphase inclusions and liquid inclusions are contained in quartz. Filling temperatures range from $257^{\circ}$ to $370^{\circ}C$.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.281-286
• /
• 2011

DVB-T2 is a next generation DTV transmission standard, which supports various channel bandwidths. Since the symbol rate of the DVB-T2 signal is changed according to its bandwidth, the received signal needs to be sampled at a different frequency. The sampling frequency should be also adjusted depending on the sampling frequency offset due to the frequency error in the local oscillator. The sampling frequency can be locked into the symbol frequency by resampling the sampled data by ADC running at a fixed frequency. In this paper a resampler architecture for DVB-T2 is proposed. And the simulation results reveal the spectral characteristics of each subcarriers used in DVB-T2 system.