• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.11-11
• /
• 2000

Large-size ceramic/metal bulk FGMs have been fabricated on a recently developed and the world's largest Spark Plasma Sintering(SPS) systems, As a part of the development program for practical production processes and machines for FGMs by SPS, the processes, mechanical properties, dimensional size and shape effects, and production machine systems were investigated. In the past, $ZrO_{2}$/TiAI, $ZrO_{2}$/Ni, $Al_{2}O_{3}$/Ti, WC/Co, WC/Co/Steel, A1/P, Polymide, Cu/Polymide, nano-composites, porous and other combinations of bulk FGMs have already been processed using SPS. However, most of the specimen sizes were small, in a range of 20 to 30mm in diameter. Recently disk-shape sintered compacts with diameters of 100 and 150 mm, and thickness of approximately 15 and 17 mm, $ZrO_{2}$(3Y)/ stainless steel FGMs were homogenous consolidated in a shorter sintering time, while maintaining high quality and repeatability by utilizing a temperature gradient sintering method. The SPS heating up and holding time totaled less than one hour. Therefore, the SPS process in expected to find increased use in the fabrication of large-size FGMs as a new industrial processing technology. This paper introduces SPS systems, the processing principles, features and the characteristies of ceramic/metal bulk FGM.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.120.1-120
• /
• 1998

• 공업화학
• /
• 제10권8호
• /
• pp.1136-1140
• /
• 1999

폴리아마이드6(PA6)와 무수말레산이 그라프트된 폴리프로필렌(PP-g-MA)의 용융혼합된 블렌드계를 제조하고, 이 블렌드계의 인장, 굴곡, 충격, 동적기계적열 특성 및 상구조의 변화를 조사하였다. 인장강도와 인장탄성율은 두 조성물의 혼합에 따른 상승효과가 나타났고, 굴곡특성의 경우는 두 조성물의 산술평균값을 유지함을 알 수 있었다. 그리고 충격강도의 경우는 PA6/PP-g-MA 50/50 wt % 조성에서 최대값을 보였다. Tan ${\delta}$결과로부터, 두 조성물간의 반응에 의해 혼화성이 증가되었음을 확인하였다. 또한 상구조와 충격강도의 결과로부터, 본 블렌드계는 PA6 매트릭스에 PP-g-MA가 $2{\mu}m$정도 크기로 고르게 분산되어진 경우에 우수한 내충격성을 갖음을 알 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권4호
• /
• pp.161-168
• /
• 2001

Organic thin film transitors(TFTs) are of interest for use in broad area electronic applications. For example, in active matrix liquid crystal displays(AMLCDs), organic TFTs would allow the use of inexpensive, light-weight, flexible, and mechanically rugged plastic substrates as an alternative to the glass substrates needed for commonly used hydrogenated amorphous silicon(a-Si:H). Recently pentacene TFTs with carrier field effect, mobility as large as 2 $cm^2V^{-1}s^{-1}$ have been reported for TFTs fabricated on silicon substrates, and it is higher than that of a-Si:H. But these TFTs are fabricated on silicon wafer and $SiO_2$ was used as a gate insulator. $SiO_2$ deposition process requires a high insulator which is polyimide and photo acryl. We investigated trasfer and output characteristics of the thin film transistors having active layer of pentacene. We calculated field effect mobility and on/off ratio from transfer characteristics of pentacene thin film transistor, and measured IR absorption spectrum of polymide used as the gate dielectric layer. It was found that using the photo acryl as a gate insulator, threshold voltage decreased from -12.5 V to -7 V, field effect mobility increased from 0.012 $cm^2V^{-1}s^{-1}$ to 0.039 $cm^2V^{-1}s^{-1}$ , and on/off current ratio increased from $10^5\;to\;10^6$. It seems that TFTs using photo acryl gate insulator is apt to form channel than TFTs using polyimide gate insulator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.111-114
• /
• 1995

This paper describes the imidization of PAAS(polyamic acid alkylamine salts) Langmuir-Blodgett (LB) films and the electrical properties of PAAS and polyimide(PI) LB films, The imidization conditons were investigated by TGA(Thermal Gravi-tational Analysis). FT-IR and UV/ visible absorption spectra. A thermal imidiczation was peformed at 300$^{\circ}C$ for 1 hour. The electrical properties of the PAAS and polymide LB films were measured by current-voltate(L-V) characteristics It shows that the electrical condcutivity of PL LB films is about 10 $\^$-15/S/cm which is two orders of magnetiude lower than that of the PAAS LB films A Schottky effect was also observed in both films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.266-266
• /
• 2013

We show a set-up of poly (4,4'-aminotriphenylene hexafluoroisopropylidenediphthalimide) (6F-TPA PI)/Al sample in which holes are injected by photoelectron emission process instead of direct charge carrier injection via metal electrode. In this process, an irreversible electrical phase transition of 6F-TPA PI is found in contrast to the Al/6F-TPA PI/Al structure, leading to a write-once-readmany behavior. The photoelectron spectroscopy results measured before and after the switching process revealed that the irreversible electrical phase transition of 6F-TPA PI is attributed to the chemical modification of the carbonyl group in phthalimide moiety.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.245-245
• /
• 2006

Recent studies of single wall carbon nanotube (SWNT)/polyimide nanocomposites indicate that these materials have a potential to provide the combination of structural integrity and sensing/actuation capability. This study shows the effect of the SWNT type and concentration on the dipole orientation and piezoelectric properties of the electroactive polymide nanocomposites using a thermally stimulated current (TSC) spectroscopy. These nanocomposites exhibit very thermally stable piezoelectric properties up to $150^{\circ}C$. This presentation will highlight the dipole orientation and electroactive characteristics of the SWNT/polyimide nanocomposites and discuss their potential multifunctional aerospace applications.

• 한국진공학회지
• /
• 제6권3호
• /
• pp.187-193
• /
• 1997

상온에서 polyimide 위에 증착한 Cu의 초기성장 과정과 Cu/polyimide의 계면의 형 태에 관하여 XPS를 이용하여 관찰하였다. Polyimide 위에 Cu가 증착됨에 따라, 초기단계에 는 강한 결합의 Cu-N-O complex가 주가 되어 Cu/polyimide 계명을 형성하고, Cu의 증착 두께가 증가함에 따라, 약한 결합의 Cu산화물에서 서서히 metallic Cu로서 성장하는 것을 볼 수 있었다. 이상이 결과들을 통해, Cu/polyimide의 계면은 Cu-N-O complex와 Cu산화물 이 혼합되어 있는 형태이며 polyimide 표면에 가까울수록 Cu-N-O complex가 주가 되고, Cu쪽에 가까울수록 Cu산화물이 주가 되는 형태를 이루고 있다는 것을 알 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권1호
• /
• pp.26-29
• /
• 2002

Polyimide-epoxysilane (coupling agent) composites were reacted with oligomeric PDMS, a condensation product of difunctional silane, by a sol-gel process and were then dried into films. And then, the surface, mechanical, and electric properties were measured. The study showed that PDMS existed in the polymide matrix by the use of FT-IR. In the mechanical properties, the maximum elongation and toughness was increased in the polyimide with silane-groups. But the maximum tensile strength was slightly decreased. And the intensive dispersion of the silane-groups on the surface of polyimide was ascertained through XPS measurement. In the electric properties. AC break down voltage was increased by increasing the amount of difunctional silane. This experiment showed that PDMS added polyimide had better mechanical and electric properties than classical materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.324-327
• /
• 2001

Liquid crystal alignments on a rubbed polyimide layer were investigated by using optical transmission method. Using this technique, we also studied the pretilt angle of the polymer molecules near the surface of a side-chain polymer layer as a function of the rubbing strength. In particular, we obtained the optical characteristics of liquid crystal orientations and pretilt angles for LC cell photo-aligned by UV as well after rubbing alignment. High pretilt angle of 3.84 degree was obtained on the weekly rubbed polymide layer duribg UV irradation time of 60min.