• 한국염색가공학회지
• /
• 제10권5호
• /
• pp.32-38
• /
• 1998

Glycolides were polymerized by PPG or Pluronic(PN) to give A-B-A block copolyesters consisting of polyglycolide(A) and polypropylene glycol(B) or polyglycolide(A) and PN (B). Lactones were easily copolymerized with polyethers by ester interchange reaction even in the absence of catalyst. It is because PPG and PN are telechelic polyethers having hydroxy groups on their both ends. When the feed ratio of PPG(M$_{n}$=4,000) and PN(M$_{n}$=11,500) were over 5 and 10 wt% .elative to glycolide, respectively, the polymerization of glycolide took place from the terminus hydroxy groups of PPG or PN to produce the desired A-B-A block copolymers in high yields. The molecular weights of the copolymers, which estimated from the monomer conversions and the feed ratios of PPG and PN, could be controlled by changing the kind of terminus hydroxy of polyether and the feed molar ratio of PPG and PN. PN.

• 한국의류학회지
• /
• 제10권2호
• /
• pp.79-84
• /
• 1986

Methacrylic acid was graft polymerized with benzoyl peroxide in itiator onto the commercial PET film. Graft polymerization was carried out in emulsion, which consisted of BPO (1), chlorobenzene(8) as swelling agent, tween 80(1) and sodium lauryl sulfate(1) as emulsifier and water(1,000). Original PET film has poor reactivities and, so the film preswdled with benzyl alcohol($150^{\circ}C$, 1hr) was also examined. The graft yield of PET film was increased with reaction temperature and monomer concentration. The graft yield of preswelled PET film was higher than that of no-treated PET film. Moisture regain was linearly increased with graft yield. DSC thermodiagram showed the Tm of grafted PET film was same as that of original PET film. Grafted PET film was dyed with methylene blue solution. The photograph of the cross section showed that grafting was occured not at the center but near surfaces.

• 한국응용과학기술학회지
• /
• 제17권3호
• /
• pp.192-197
• /
• 2000

Rosin moeity-containing monomer was prepared by the reaction of abietic acid with 2-hydroxyethyl methacrylate in tetrahydrofuran(THF) using diethyl azodicarboxylate as a catalyst. This new monomer was photo-polymerized to give thin films in the presence of a radical type initiator. The rate of photo-polymerization and amount of cured polymer were determined using the residual yield method. A thermogravimetric analysis of the cured polymer showed that the film was stable up to 170oC, at which point the polymer film has lost 10 wt % of its weight.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.43-47
• /
• 2001

Plasma polymerized hexamethyldisiloxane thin film was fabricated by employing an inter-electrode capacitively coupled type apparatus under the following conditions : carrier gas flow rate of 11 sccm, reaction pressure of 0.1 torr, discharge frequency of 13.56 MHz and discharge power of 30∼90 W. Polymerization rate of thin film fabricated at the discharge power of 90W is 32.5nm/min. Relative dielectric constant and dielectric loss tangent of thin film shows 3.2∼3.8 and 2.6x10$\^$-3/∼4.51x10$\^$-3/ respectively in the frequency range of 1 kHz∼1 MHz. As the annealing temperature is increased, the relative dielectric constant gradually decreases while the dielectric loss tangent increases. The current density increase gradually with increasing annealing temperature and electric field. The electric conduction of the heaxamethyldisiloxane thin film shows Schottky effect.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.275-275
• /
• 2006

A series of organoboron polymer electrolytes were prepared and their ion conductive characteristics was investigated in detail. Alkylborane type polymer electrolytes prepared by hydroboration polymerization exhibited improve lithium transference number due to efficient anion trapping of alkylborane unit. A lithium borate type polymer/salt hybrid was also successfully prepared by dehydrocoupling polymerization of lithium mesitylhydrorate. Ionic conductivity of single ion conductive polymer/salt hybrid was further improved in the case of comb like polymer/boron stabilized imido anion hybrid prepared via polymer reaction of poly(organoboron halide) with hexylamine and PEO monomethylether and subsequent neutralization with lithium hydride.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.100-105
• /
• 1992

A mathematical model is developed for a CSTR in which free radical solution polymerization of methyl methacrylate(MMA) takes place. It turns out that five ordinary differential equations are to be treated simultaneously in order to predict the reactor performance. Although the reaction proceeds under the conditions of relatively low temperature and pressure, the system shows very complex bifurcation features due to the diffusion limitation (gel effect) and the temperature dependence of the kinetic parameters and physical properties. The effects of various system parameters on the reactor performance as well as on the polymer properties are investigated by using the bifurcation analysis. The application of the singularity theory enables us to divide the parameter space into several different regions, in each of which the system takes a unique steady state structure. Under certain circumstances, complex dynamic features such as HB points and limit cycles are observed and these should be taken into consideration in the reactor design.

• 한국진공학회지
• /
• 제7권1호
• /
• pp.72-76
• /
• 1998

본 연구에서는 방전내에서 활성화된 라디칼의 반응을 촉진시키는 플라즈마중합을 통하여 기능성 유기박막을 합성하기 위해 새로운 형태의 유동가스형 반응장치를 개발하였 다. 중합을 위해서 스티렌 모노머를 사용하였으며 분자구조와 분자량 분포에 대한 분석을 행하였다. 제작된 플라즈마중합막은 우수한 성능의 전자빔 레지스트로서 평가되었다. 새로운 플라즈마 반응장치를 이용하여 제작된 박막의 감도는 습식공정에 의해 제작된 레지스트의 감도에 비해서 향상되었으며 깨끗한 패턴이 성공적으로 제작되었다.

• 한국군사과학기술학회지
• /
• 제8권1호
• /
• pp.69-80
• /
• 2005

A synthesis of azide-terminated glycidyl azide polymer, GAP-A, was carried out by tosylation and azidation of polyepichlorohydrin(PECH) prepared by cationic ring-opening polymerization. Polyepichlorohydrin was prepared by cationic activated monomer polymerization using ethylene glycol and $BF_3{\cdot}OEt_2$ as an initiator and a catalyst at $\~10^{\circ}C$. Tosylation of polyepichlorohydrin was performed using traditional TsCl/pyridine method and was also carried out using TsCl/amine catalysts to reduce the reaction time significantly. Azidation of tosyl-terminated PECH(OTs-PECH) was performed using $NaN_3$ as an azidation reagent in DMF solvent at high temperature and was unexpectedly completed within 2 hours.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.109-117
• /
• 2004

We synthesized energetic prepolymer(2-nitrato ethyl oxirane, NEO) for plastic-bonded explosive and measured its thermodynamic parameters. 2-Nitrato ethyl oxirane(NEO) as a monomer was synthesized from 4-butene-ol, the first-step was preparation of 1-nitrate-3-butene and second-step was synthesized 2-nitrate-ethyl oxirane from 1nitrate-3-butene and then polymerized by cationic ring opening polymerization. The unreacted monomer concentration was measured by GC. The thermodynamic parameters were obtained from the ceiling temperature(Tc) values of 1 mole monomer at each reaction temperature. We varied feed rate of monomer, concentration of initiator and monomer to control molecular weight and polydispersity of perpolymer(NEO). Number average molecular weight(Mn), polydispersity(PD), and glass transition temperature(Tg), viscosity of prepolymer(NEO) were 2000, 1.07, $-55^{\circ}C$ and 300 poise respectively.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.171-175
• /
• 2005

A new type of supercapacitor was constructed by using carbon nanofibers (CNFs) and DAAQ (l,5-diaminoanthraquinone) oligomer. DAAQ was deposited on the carbon nanofibers by chemical polymerization with ammonium peroxodisulfate (($NH_4)_2S_2O_8$) as oxidant in the 0.1 M $H_2SO_4$. Polymerization reaction was carried out with constant sonication. From the analysis, it is clear that surface of carbon nanofibers was quite uniformly coated with DAAQ. The performance characteristics of the supercapacitors have been evaluated using Cyclic Voltammetry. CNFs/DAAQ based composite electrode showed relatively good electrochemical behaviors in acidic electrolyte system. CNFs/DAAQ composite electrode showed relatively good capacitance (7 Ah/kg) compared to conventional capacitors in the range of $-0.4\~0.4$.