• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.123.1-123
• /
• 2003

• 한국재료학회지
• /
• 제21권8호
• /
• pp.468-475
• /
• 2011

[ $LaMeO_3$ ](Me = Cr, Co) powders were prepared using the polymeric precursor method. The effects of the chelating agent and the polymeric additive on the synthesis of the $LaMeO_3$ perovskite were studied. The samples were synthesized using ethylene glycol (EG) as the solvent, acetyl acetone (AcAc) as the chelating agent, and polyvinylpyrrolidone (PVP) as the polymer additive. The thermal decomposition behavior of the precursor powder was characterized using a thermal analysis (TG-DTA). The crystallization and particle sizes of the $LaMeO_3$ powders were investigated via powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and particle size analyzer, respectively. The as-prepared precursor primarily has $LaMeO_3$ at the optimum condition, i.e. for a molar ratio of both metal-source (a : a) : EG (80a : 80a) : AcAc (8a) inclusive of 1 wt% PVP. When the as-prepared precursor was calcined at $700^{\circ}C$, only a single phase was observed to correspond with the orthorhombic structure of $LaCrO_3$ and the rhombohedral structure of $LaCoO_3$. A solid-electrolyte impedance-metric sensor device composed of $Li_{1.5}Al_{0.5}Ti_{1.5}(PO_4)_3$ as a transducer and $LaMeO_3$ as a receptor has been systematically investigated for the detection of NOx in the range of 20 to 250 ppm at $400^{\circ}C$. The sensor responses were able to divide the component between resistance and capacitance. The impedance-metric sensor for the NO showed higher sensitivity compared with $NO_2$. The responses of the impedance-metric sensor device showed dependence on each value of the NOx concentration.

• 한국재료학회지
• /
• 제13권3호
• /
• pp.180-184
• /
• 2003

Ce-doped $Y_2$SiO$_{5}$ phosphor particles of spherical morphology, fine size, high crystallinity and high photoluminescence (PL) intensity were prepared by spray pyrolysis. When nitrate precursor solution is adopted, hollow particles were formed by uneven drying rate between surface and inside of droplet. Citric acid and ethylene glycol were introduced as polymeric precursor to control the morphology of particles. When polymeric solution is adopted, polymeric chain is formed by the esterification reaction between carboxyl and hydroxy groups of citric acid and ethylene glycol, and considered as controlling the drying characteristics of droplet. $Y_2$$SiO_{5}$ :Ce phosphor particles prepared from polymeric precursor solution were spherical, filled, fine size and not agglomerate before and after post heat treatment. The optimum doping concentration of cerium was 0.5 mol% of overall solution concentration. The optimum amount of TBOS of high PL intensity and pure crystallinity of X2-type $Y_2$$SiO _{5}$ was 105% of stoichiometric amount. The PL intensity of $Y_2$X$/_{5}$ :Ce phosphor particles prepared using the polymeric precursor solution was 164% of that of the nitrate precursor solution due to homogeneous composition and good morphology.y.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.37-45
• /
• 1991

The critical current density, electrical conductivity, critical magnetic field, Meissner effect, apparent density, and microstructure of YBa2Cu3O7-x ceramic superconductor prepared by polymeric precursor, while varing calcining and sintering conditions, were investigated. The best superconducting properties could be obtained from the body sintered at 93$0^{\circ}C$ for 10h after calcining at 90$0^{\circ}C$ for 10h, which gave 383A/$\textrm{cm}^2$ of critical current density(Jc), 96K of onset temperature(Tonset), 94. 8K of zero temperature (Tzero) 225 Oe of critical magnetic field (Hc1), 72.8% of superconducting volume fraction measured by Meissner effect and 6.28g/㎤ of apparent density.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.310-317
• /
• 2003

Two-component ceramic (alumina-zirconia) composites were fabricated by a soft-solution process in which polyethylene glycol (PEG) was used as a polymeric carrier. Metal salts and PEG were dissolved in ethyl alcohol without any precipitation in 1:1 volume ratio of alumina and zirconia. In the non-aqueous system, the flammable solvent made explosive, exothermic reaction during drying process. The reaction resulted in formation of volume expanded, porous precursor powders by a vigorous decomposition of organic components in the precursor sol. The PEG content affected the grain size of sintered composites as well as the morphology of precursor powders. The difference of microstructure in sintered composite was attribute to the solubility and homogeneity of metal cations in precursor sol. At the optimum amount of the PEG polymer, the metal ions were dispersed effectively in solution and a homogeneous polymeric network was formed. It made less agglomerated particles in the precursor sol and affected on uniform grain size in sintered composite.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.788-791
• /
• 2002

The phosphors of high luminous efficiency for PDP application must have high purity, single phase, and dense surface. In this work, the polymeric reaction was applied to preparation of spherical phosphor by aerosol pyrolysis in order to enhance mechanical and optical characteristics. The red phosphor of (Y,Gd)$BO_3$:Eu was prepared from polymeric precursor, in which citric acid and ethylene glycol were used as ion carriers, i.e monomers. For enhancing the luminescence intensity and mechanical characteristics. optimum synthesizing condition were investigated through concentration of monomers, synthetic temperature. doped activator concentrations, and annealing process. The phosphors synthesized with monomers showed quite different morphology from those without monomers. It was observed that polymeric precursor made an effect on particle formation mechanism and status of particles surface. The resultant spherical phosphors show the comparable luminescent properties to the commercial product (product by Nichia co.). Also, they were observed to have the rigid surface.

• 한국세라믹학회지
• /
• 제39권4호
• /
• pp.336-340
• /
• 2002

Pure and nano-sized $TiO_2$ and $CaTiO_3$ powders were fabricated by a polymeric steric entrapment route and planetary milling process. An ethylene glycol was used as a polymeric carrier for the preparation of organic-inorganic precursors. Titanium isopropoxide and calcium nitrate were dissolved in liquid-type ethylene glycol without any precipitation. At the optimum amount of the polymer, the metal cations were dispersed in solution and a homogeneous polymeric network was formed. The dried precursor ceramic gels were turned to porous powders through calcination process. The porous powders were crystallized at low temperatures and the crystalline powders were planetary milled to nano size.

• 멤브레인
• /
• 제7권1호
• /
• pp.15-21
• /
• 1997

Carbon molecular sieve (CMS) membranes were synthesized by the pyrolysis of polymeric precursors. The CMS materials had oxygen-nitrogen selectivities much higher than those observed for the polymeric precursors. Typically molecular sieving materials have diffusion selectivities much higher than polymeric materials. This has been identified as a result of higher entropic selectivity of the molecular sieving materials. A study of the development of molecular sieving properties as the polymeric precursor is pyrolyzed into a CMS material will offer us an insight into polymeric molecular structures needed for enhanced entropic selectivity membrane materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.885-888
• /
• 2004

We have prepared and investigated the properties of photoinitiator-free photosensitive polyimide gate insulatos for organic thin-film transistors (OTFTs). The precursor was prepared from a dianhydride, 3,3',4,4'-Benzophenone tetracarboxylic dianhydride (BTDA) and novel aromatic diamine, 7-(3,5-diaminobenzoyloxy) coumarine (DA-CM). Photo-patternability of the polyimide precursor film and surface morphology of the films before and after photo-patterning process were investigated and negative pattern with a resolution of 50 ${\mu}m$ was obtained nicely. In addition, we have fabricated OTFTs with pentacene and photosensitive polyimide as a semiconductor and a gate insulator; respectively. According to the device geometry, the ${\mu}$, current modulation ratio and subthreshold swing of the devices were around 0.2${\sim}$0.4 $cm^2$/Vs, more than $10^5$ and around 3${\sim}$5 V/dec, respectively.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.80-84
• /
• 2005

초음파 분무 열분해 공정에 의해 나노 크기의 $Y_2O_3:Eu$ 형광체 분말들을 합성하였다. 고분자 전구체와 융제로 사용되어진 리튬 탄산염이 나노 크기의 $Y_2O_3:Eu$ 형광체의 형태 및 발광 특성에 미치는 영향에 대해 조사하였다. 고분자 전구체와 융제를 동시에 사용했을 때 분무 열분해 공정에 의해 제조된 구형의 마이크론 크기의 분말들은 고온의 후열처리 과정에서 나노 크기의 분말로 전환되었다. $Y_2O_3:Eu$ 형광체의 평균 크기는 분무용액에 첨가되어지는 고분자 전구체와 융제인 리튬 탄산염의 첨가량 및 분무 열분해 공정의 반응기 온도에 많은 영향을 받았다. 고농도의 고분자 전구체를 함유한 분무용액으로부터 고온의 반응기에서 합성되고, $1,000^{\circ}C$ 이상에서 후열처리한 나노크기 $Y_2O_3:Eu$ 분말들은 진공자외선 하에서 좋은 발광 특성을 나타내었으며, 고상 공정에 의해 합성된 상용의 $Y_2O_3:Eu$ 형광체와 비슷한 발광 세기를 가졌다.