• Macromolecular Research
• /
• v.11 no.6
• /
• pp.437-443
• /
• 2003

A series of alternating and alternating block copolycarbonates containing the constituent groups of polysulfone was synthesized through a multi-step solution condensation method. For the regulation of block length, monodisperse oligomers were prepared by using a large excess of the bisphenols and were subsequently incorporated into the copolymer chains. Separating the unreacted bisphenols from the oligomers by dissolution/precipitation steps took advantage of solubility differences. The structures of the monomers, oligomers, and copolymers were characterized and confirmed by GPC, NMR spectroscopy, mass spectrometry, and elemental analysis. Monodispersity of the oligomers, which is critical for control over the block length in the copolymers, was confirmed by GPC and mass spectrometry. Of the two constituent groups of the polysulfone, the sulfone linkage stiffens the polycarbonate copolymer chain, while the ether linkage softens it.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.1
• /
• pp.24-29
• /
• 2017

A fluorinated polybenzimidazole (FPBI) was synthesized from 3,3-diaminobenzidine (DAB) of tetraamine, 2,2-bis(4-carboxyphenyl)hexafluoropropane of aromatic biscarboxylic acid, and 4,4-sulfonyldibenzoic acid of aromatic biscarboxylic acid in polyphosphoric acid (PPA). A FPBI was easily cast and made into clear films. The structure of condensation polymers and corresponding membranes were analyzed using GPC (gel permeation chromatography), $^1H$-NMR ($^1H$ nuclear magnetic resonance) and FT-IR (fourier transform infrared). TGA (thermogravimetric analysis) analysis showed that the prepared membranes were thermally stable, so that elevated temperature fuel cell operation would be possible. The proton conductivity of the FPBI membranes increased with increasing temperatures in the polymer. A FPBI membrane has a maximum ion conductivity of 45 mS/cm at $90^{\circ}C$ and 100% relative humidity.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.138-142
• /
• 2008

Molecularly imprinting technology is an effective method to prepare a synthetic material with a high selectivity to a target molecule. In this study, a molecularly imprinted polymer (MIP) was synthesized via UV-polymerization using theophylline and UV-curable polyester-acrylate resin as a template molecule and a crosslinker, respectively. To elucidate the effects of functional monomer type on the performance of the MIP, each MIP was synthesized using mathacrylic acid, acrylic acid, and acryl amide as functional monomers. Each MIP showed higher rebinding capacity to theophylline than its corresponding non-imprinted polymer (NIP). The MIP synthesized using mathacrylic acid as a functional monomer showed the highest rebinding capacity to theophylline. The selectivity of the MIP was investigated using a solution with caffeine having a very similar structure to theophylline. The binding performance of the MIP to theophylline decreased when distilled water was used as a solvent, which has more polarity than chloroform.

• Journal of Integrative Natural Science
• /
• v.2 no.2
• /
• pp.78-81
• /
• 2009

In recent years, organometallic polymer containing silane and silole unit has been a topic of interest because of the wide range of optical, electrical and luminescent properties. In previous work, we synthesized functionalsilanebridged[1]ferrocenophane from the reaction of dimethyldichlorosilane[Me2SiCl2] and diphenyldichlorosilane[Ph2SiCl2] and dichloromethylvinylsilane[C3H6SiCl2] with ferrocene$[Fe({\eta}-C5H4)2]$ and n-BuLi. In this work, we have synthesized Poly(ferrocenylsilane) via the Thermal Ring-Opening Polymerization(ROP). characteristics of the poly(ferrocenylsilane) were investigated by gel permeation chromatography(GPC), 1H- and 13C-NMR spectroscopy.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.91-96
• /
• 2002

Polyhydroxyamides derivatized with trifluorormethyl ether and trifluoromethyl ester groups were investigated as possible candidates for a new flame retardant polymer. Model compounds for these derivatized polyhydroxyamides were synthesized and their cyclization chemistry was investigated. The model compound study revealed that trifluorornethyl ester group containing model compounds can cyclize on heating, while trifluoromethyl ether group containing model compounds cannot. The non-fluorinated ether and ether derivatives behaved similarly. The trifluoromethyl ester derivatized polyhydroxyamides were synthesized according to the procedures for the model compounds. TGA characterization revealed that the fluorinated polymers have nearly same thermal stability as the underivatized PHA after cyclization.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1418-1421
• /
• 2009

A series of new light-emitting random copolymers with fully conjugated structure was prepared, for the first time through the well-known Gilch polymerization between 1,4-bis(chloromethyl)-2-ethylhexyloxy-5-methoxybenzene and 2,5-bis(bromomethyl)thiophene monomers in different ratios. The synthesized polymers (on thin film) showed the maximum wavelength of UV-visible absorbance and photoluminescence (PL) near 500 nm and near 600 nm, respectively. A single-layer light-emitting diode device, which has a simple ITO (indium-tin oxide)/polymer/Al configuration, was fabricated by spin-coating of polymers and then vacuum evaporation of Al metal. The threshold bias of PMEHPVTVs was in the range of 3.5-10 V. As in the PL spectra, the maximum wavelength of light emission near 600 nm was also shown in electroluminescence (EL) spectra of PMEHPVTVs when the operating voltage was about 7 - 14 V.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.194-199
• /
• 2008

Four novel polyurethanes were prepared from 4-{(4-hydroxyphenyl)iminomethyl} phenol by reactions with two aromatic diisocyanates, 4,4'-diphenylmethane diisocyanate and toluene 2,4-diisocyanate, and two aliphatic diisocyanates, isophorone diisocyanate and hexamethylene diisocyanate. The polyurethanes formed were characterized by UV-vis, fluorescence, FT-IR, $^1H$-NMR, $^{13}C$-NMR, differential scanning calorimetry, thermogravimetry, and X-ray diffraction. The polymers were semi-crystalline and all polymers were soluble in polar aprotic solvents.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.129-134
• /
• 2003

It has been known that the intercalation of long alkyl chains in montmorillonites (MMT) increased the hydrophobicity as well as gallery spacing of UT, which has influenced on the exfoliation behavior of various polymers. A series of organophilic MMTs were synthesized from the water/isopropyl alcohol solution of MMT with ammonium salts of various alkyl amines. The properties of obtained MMTs such as thermal decomposition temperature, gallery spacing as well as hydrophobic property were investigated. The X-ray diffraction experiments on organophilic montmorillonite demonstrated that the increase of length of alkyl substituent resulted in increase in the spacing between silicate layers, which was ranged from 13.1 to 29.4 $\AA$. On the other hand, introduction of (di-, tri-) alkyl substituents in ammonium salts decreased water absorption of organophiplic montmorillonite to 2.7%.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.89-93
• /
• 1997

Polyorganophosphazenes bearing various hydrophilic and hydrophobic side groups were synthesized. These polymers were crosslinked by three methods. The side groups were (2-methoxyethoxy)ethoxy, 2,2,2-trifluoroethoxy, phenyloxy, ethyl ester of alanin. Polymers synthesized in this study were crosslinked by gamma ray irradiation, UV irradiation, and UV irradiation in the presence of crosslinker and photosensitizer. Polymers crosslinked by UV irradiation in the presence of crosslinker and photosenitizer yielded hydrogels of highest elasticity. All hydrogels had lower critical separation temperature behavior.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.63-67
• /
• 2007

Biodegradable cationic poly(ester-amide) polymers were synthesized by double-monomer method, that showed excellent solubility in many organic solvents and water. Different degradation patterns were obtained by the regulation of monomer ratios and overall long period of time of DNA protection up to 12 days was shown by PicoGreen reagent assay. Good transfection profiles in the presence of serum and very low toxicity on mammalian cells may allow these polymers to become suitable for long-term gene delivery systems and therapeutic applications.