• 콘크리트학회논문집
• /
• 제19권4호
• /
• pp.457-465
• /
• 2007

본 연구는 3종류의 시멘트 혼화용 폴리머 (SBR, PA, St/BA)를 이용하여 폴리머시멘트계 보수재의 개발을 목적으로 공시체의 제작 방법을 6가지 형태로 하여 제작한 폴리머시멘트모르타르 보수재에 대하여, 기중양생, 수중양생, 기중양생 후 동결융해 작용 및 수중양생 후 동결융해 작용을 받는 4가지 양생방법을 적용하였다. 그리고 폴리머의 종류, 양생조건, 폴리머시멘트비에 따른 폴리머시멘트모르타르 보수재의 강도 성상을 파악하고, 휨강도 시험 후의 계면 접착 파괴 유형을 검토하였다. 그 결과, 일부의 모르타르를 제외하면, 폴리머의 종류에 따른 폴리머시멘트모르타르 보수재의 압축강도 및 휨강도는 양생조건에 관계없이 St/BA를 혼입한 폴리머시멘트모르타르 보수재가 SBR 또는 PA를 이용한 것보다 우수한 것으로 나타났다. 폴리머시멘트모르타르 보수재의 휨강도 시험 후 파괴 유형은 공시체의 형상과 폴리머시멘트비에 관계없이 모든 공시체에서 계면 접착 파괴는 발생하지 않았다. 이는 폴리머 혼입에 의한 접착성 개선에 의한 것으로 판단된다. 보통시멘트모르타르에 폴리머시멘트모르타르 보수재를 적용함으로써 기중양생 또는 수중양생 후 동결융해의 반복 작용을 받는 열악한 환경하에서도 보통시멘트모르타르보다 강도 저하가 작게 나타나 폴리머 혼입에 의한 동결융해저항성능을 확인할 수 있었다. 본 연구를 통하여 폴리머시멘트모르타르를 다양한 양생조건과 보수방법에서 사용할 때 나타나는 강도 특성, 내동결융해성능 및 휨 접착 파괴 유형을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.617-620
• /
• 2006

The EVA polymer is used as a modifier in the repair mortar, which contains various admixtures and mineral admixtures. It has been reported that the effect of polymer in cement mortar by the cement-polymer ratio only, but effect of admixtures over the polymer mortar was unknown. In this study, the fresh and mechanical properties of polymer cement mortar influenced by the range of silica fume ratio were investigated. It was found that with increasing the ratio of silica fume, mechanical properties(compressive strength, flexural strength, adhesive strength) of repair mortar is improved and drying shrinkage is increased.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권4호
• /
• pp.153-159
• /
• 2006

현재, 폴리머는 보수용 모르타르의 혼화재료로 주로 사용되고 있으며, 이러한 보수용 모르타르에는 폴리머 이외에 각종 혼화재료가 첨가되어 있다. 본 연구에서는 폴리머의 배합비율에 따라 보수용 모르타르에 미치는 영향과 동일한 EVA계 폴리머가 제조사가 다른 제품에 따라 미치는 영향을 비교하고자 모르타르의 굳기 전 특성 및 역학적 특성에 대하여 시험을 통하여 분석하였다. 시험결과 보수용 모르타르에 폴리머의 배합비율이 증가될수록 역학적 특성(압축강도, 휨 강도, 부착강도)이 개선되었으며, 또한 건조수축도 증가하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권1호
• /
• pp.85-94
• /
• 2007

재유화형 폴리머는 보수용 모르타르의 개질재료로 주로 사용되고 있으며, 이러한 보수용 폴리머 시멘트 모르타르에는 폴리머 이외에 각종 혼화재료가 첨가된다. 기존의 연구들은 시멘트-폴리머 비가 모르타르에 미치는 영향에 대하여 주로 이루어졌으며, 혼화재료가 폴리머 시멘트 모르타르에 미치는 영향은 보고 되어있지 않는 실정이다. 본 연구에서는 혼화재료들(CSA계 팽창재, CSA계 속경재, 석고, 실리카 흄)의 배합비율에 따라 폴리머 시멘트 모르타르에 미치는 영향을 분석하고자 모르타르의 작업성, 응결시간, 건조수축, 압축강도, 휨 및 부착강도 등의 기초적 성질에 대하여 실험적으로 구명하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.193-194
• /
• 2019

The purpose of this study is to design the basic mix proportions of antiwashout underwater polymer cement mortar as a repair material. The antiwashout underwater polymer cement mortars are prepared with various mix proportions using three type polymer dispersions without or with antifoamer. From the test results, the whole antiwashout underwater polymer cement mortars can be cast underwater without segregation like plain mortar. It is apparent that the flexural strength of antiwashout underwater SBR cement mortars with antifoamer at polymer- cement ratios of 5% and 10% is higher than that of plain mortar irregardless of a little low compressive strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.295-298
• /
• 2012

Repair and strengthening is necessary to extend the service life of existing buildings. Polymer-modified cement mortar (PCM) has been extensively used as a high performance material particularly for finishing and repairing works in concrete building because of itsexcellent adhesion, waterproofing, resistance to chemical attack, and workability. As PCM contains organic polymer, it is necessary to clarify its properties at high temperature under fire, on which sufficient data are not available. This paper evaluated the burn-up characteristics of polymer-modified cement mortar with cone calorimeter test, non-combustibility test and flammability test with experimental parameters such as the types of polymer, unit-polymer content, polymer-cement ratio and thickness of the specimen.

• 한국철도학회논문집
• /
• 제9권4호
• /
• pp.349-356
• /
• 2006

At present, the selecting system and analytic estimation criterion on repair materials and methods of the deteriorated RC structures have not yet been set up in domestic. Under these circumstances, deterioration such as shrinkage crack, corrosion of rebar has been often occurred after repair, and this finally results in too frequent repairs. In this study, three types of repair methods were experimentally investigated by the accelerating test in a combined deterioration chamber and long-term field exposure test. Three types of repair methods applied in this study belong to a group of polymer cement mortar, which is commonly used in repair works. According to the results of this study, durability of repair mortar layers and corrosion properties of recovered rebar could be investigated in short period by the accelerating test in a combined deterioration chamber, which can simulate the condition of repeated high-and-low temperature and repeated dry-and-wet environment, spraying chloride solution and emitting $CO_2$ gas. After 36 month long-term filed exposure test in the coastal area, harmful macro-cracks are observed in the polymer cement mortar layer of some repair methods. These crack are considered to result from drying shrinkage of polymer cement mortar. Also, after 36 month exposure, amount of corrosion area and weight loss of rebar are found to be different according to the types of repair methods.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.319-322
• /
• 1999

The adhesion properties of polymer cement mortars for cement concrete repair were evaluated with respect to polymer-cement ratios and the surface conditions of cement concrete substrate. Styrene-butadiene rubber (SBR) was used as an additive for polymer cement mortars. The adhesion strength of cement mortar was smaller than that of polymer cement mortar. The adhesion strengths to the dry surfaces of substrate were larger than those to the wet surfaces, indicating that the dryness of substrate increased the adhesion strength in repairing concrete structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.733-738
• /
• 2000

This paper was aimed to evaluate the structural performance of flexural members repaired by polymer cement and epoxy mortar at soffit. Main test variables were repair materials, ratio of reinforcement and additional reinforcing bars. Test results shows that the repaired beams could change flexural capacity by materials and additional reinforcing bars. In polymer cement, the section repaired can carry same load, cracking moment and the flexural stiffness of the monolithic beams with same size. In epoxy mortar, all data were greater than the shotcrete. However, note that epoxy mortar may conduct member into brittle failure mode.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.793-796
• /
• 2004

In domestic, various repair materials and method systems to keep up with these reinforced concrete deteriorated due to salt damage, carbonation. chemical decay et. being developed and applied. However, present polymer cement mortar applied to section restoration system cause the problem of long-term working and economica] efficiency. because that is divided into two process of liquid corrosion prevention agent and polymer cement mortar. In this background, accelerated test with due regard to $3\%$ NaCl soaking and autoclave cure was performed to confirm steel bar corrosion prevention properties of polymer cement mortar mixed with corrosion prevention agent of powdered type. In conclusion. we confirmed application possibility and excellency of steel bar corrosion prevention properties of polymer cement mortar mixed with corrosion prevention agent of powdered type comparing general polymer cement mortar applied to section restoration system of present study.