• Elastomers and Composites
• /
• 제49권2호
• /
• pp.134-143
• /
• 2014

자가치유형 아스팔트를 구현하기 위하여 분자간결합력이 큰 고분자를 아스팔트에 투입시켰다. 사용된 고분자는 셜린, 나일론 및 폴리에스터이다. 이 고분자들은 가공온도가 $200^{\circ}C$를 넘어 고체상태로는 투입이 어려워 용액상태로 첨가하였다. 고분자가 첨가된 아스팔트들은 우수한 개질효과와 치유효과를 나타내었다. 인장강도에서 고분자개질아스팔트들은 고분자가 5% 투입되었으나 강도는 18%이상 증가하였다. 고분자와 아스팔트분자 간에 상호작용이 있는 것으로 보인다. 특히 셜린과의 분자간결합력이 가장 큰 것으로 보인다. 셜린은 아스팔트와 수소결합 및 아스팔트내에 존재하는 금속들과 이온결합을 할 것이다. 치유성에 있어서는 인장강도 면에서 셜린이 가장 높은 138%의 치유능을 나타내었으며 복합모듈러스 면에서는 폴리에스터가 141%의 치유능을, 충격강도 면에서는 나일론이 131%의 치유능을 보였다. 이는 치유능 해석에서 고분자의 분자간결합력도 중요 사항이지만 고분자와 아스팔트간의 상호작용 또한 중요한 고려 사항이 되어야함을 의미한다.

• 접착 및 계면
• /
• 제13권1호
• /
• pp.1-8
• /
• 2012

EPDM에 카르복시산을 포함하는 아크릴 단량체인 methacrylic acid (MA)가 도입된 grafted EPDM을 합성하여 MA의 grafting ratio가 탄성체의 물성과 다른 고무와의 접착특성에 미치는 영향을 연구하였다. Grafted EPDM의 storage modulus는 특정온도까지는 sulfur로 가교한 EPDM vulcanizate보다 높게 유지되다가 온도가 더 높아지면 2차 결합력이 약해지면서 급격하게 감소되는 것이 관찰되었다. EPDM에 수소결합을 유도할 수 있는 반응기를 도입했을 때 grafted EPDM 분자들 간의 aggregate 형성과 그라프트된 MA의 결정성으로 인해 우수한 기계적 물성을 나타내었다. EPDM 자체는 극성이 낮고 다른 종류의 고무와 분자간 결합력이 약해서 접착이 제대로 이루어지지 않았으며 그라프트된 MA의 함량이 증가할수록 접착강도가 더 높아졌으며 MA의 grafting ratio가 10% 이상일 때에는 접착평가 시 고무시편이 부분적으로 파괴될 정도로 접착력이 우수하였다.

• 마이크로전자및패키징학회지
• /
• 제29권2호
• /
• pp.113-119
• /
• 2022

플렉서블, 웨어러블 디바이스 등을 포함한 차세대 전자 기기의 기계적 신뢰성 향상을 위하여 다양한 유연 접합부에서 높은 수준의 기계적 신뢰성이 요구되고 있다. 기존 고분자 기판 접합을 위한 에폭시 등의 유기 접착소재는 접합부 두께 증가가 필연적이며, 반복 변형, 고온 경화에 의한 열기계적 파손 문제를 수반한다. 따라서 유연 접합을 위해서 접합부 두께를 최소화하고 열 손상을 방지하기 위한 저온 접합 공정 개발이 요구된다. 본 연구에서는 플렉서블 기판의 유연, 강건, 저 열 손상 접합이 가능한 플렉서블 레이저 투과 용접(flexible laser transmission welding, f-LTW)를 개발하였다. 유연 기판 위 탄소나노튜브(carbon nanotube, CNT)를 박막 코팅하여 접합부 두께를 줄였으며, CNT 분산 빔 레이저 가열을 통한 고분자 기판 표면의 국부적 용융 접합 공정이 개발되었다. 짧은 접합 공정 시간과 기판의 열 손상을 최소화하는 레이저 공정 조건을 구축하였으며 고분자 기판과 CNT 접합 형성 메커니즘을 분석하였다. 또한 접합부의 강건성 및 유연성 평가를 위해 인장강도 시험, 박리 시험과 반복 굽힘 시험을 진행하였다.

• 소성∙가공
• /
• 제20권1호
• /
• pp.64-72
• /
• 2011

In this study, we have investigated bonding of metal and plastic parts with single planar interface. This is facilitated by surface processing of aluminum sheet, which consists of slitting and punching, followed by insert-molding of polybuthylelne terephthalate(PBT). An injection mold has been built to fabricate specimen. After processing of the specimen, tensile and bending shear adhesion tests have been fulfilled according to KS M3734 and KS M3723, respectively. We also have conducted simulation of tensile and bending shear adhesion tests. Based on the tests results, the proposed bonding method outperforms existing methods based on adhesion.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.111-116
• /
• 2018

Thermal fusion bonding is a method to enclose open microchannels fabricated on polymer chips for use in lab-on-a-chip (LOC) devices. Polymethyl methacrylate (PMMA) is utilized in various biomedical-microelectromechanical systems (bio-MEMS) applications, such as medical diagnostic kits, biosensors, and drug delivery systems. These applications utilize PMMAs biochemical compatibility, optical transparency, and mold characteristics. In this paper, we elucidate both the conformational entanglement of PMMA molecules at the contact interfacial regime, and the qualitative nature of the thermal fusion bonding phenomena through systematic molecular dynamics simulations.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.470-473
• /
• 2010

Graphene, consisting of a single layer of carbon in a two-dimensional lattice, has been emerging as a fascinating material with many unique physical, chemical and mechanical properties. In this study, graphenes were prepared by a chemical method. To develop high performance polymer nanocomposites reinforced by graphenes, adequate dispersion of the fillers and strong interfacial bonding between the fillers and the polymer matrix are essential. The purpose of this study was to examine the influence of introducing amine groups on the surfaces of graphenes. FT-IR spectroscopy, SEM were used to confirm the functionalization. Epoxy nanocomposites comprising the graphenes were prepared and their characteristics were investigated by DSC, DMA and TMA. Fracture surfaces of the nanocomposites were investigated by SEM. The functionalized graphenes induced strong interfacial bonding than the pristine graphenes and resulted in considerable improvements in the performance of the nanocomposites.

• 생약학회지
• /
• 제11권3_4호통권43호
• /
• pp.153-162
• /
• 1980

1) The hydroxy-substitution in the simple phenolic compounds follows an additivity rule in the chemical shifts of their aromatic carbon atoms. In para-and ortho-effects is a good agreement between calculated and measured values, but the meta-effect is not certain. 2) The additivity rule was applied to assign the chemical shifts of catechins. 3) The nuclear overhauser effect was applied to assign the chemical shifts of C-8 and C-6 atoms of catechins and their polymer. The signal of C-8 is lower in intensity and appear in lower field than C-6. 4) The results of the NOE were applied to determine the bonding positions of catechin units in the catechin dimer and trimer. The bonding positions are C-8a and C-8b atoms of the second and third catechin units. 5) It was tried to determine the conformation of the catechin dimer and trimer by analysing the signal shapes of C-3' and C-4' atoms in the catechol moieties. The catechol moieties lie in opposite side in the dimer and trimer structure. A combined analysis of $^{13}C-and\;^1H-NMR$ results lead to the suggestion that such a catechin polymer is a zigzag planar form.

• 한국고분자학회지:고분자과학과기술
• /
• 제24권3호
• /
• pp.277-284
• /
• 2013

• Bulletin of the Korean Chemical Society
• /
• 제16권1호
• /
• pp.42-47
• /
• 1995

Interpolymer complex formation between basic polypeptide poly(L-proline) Form Ⅱ (PLP(Ⅱ)) and acidic polypeptides poly(L-glutamic acid) (PLGA) and poly(L-aspartic acid)(PLAA) has been studied in water-methanol (1:2 v/v) mixed-solvent by viscometry, potentiometry, light scattering and circular dichroism (CD) measurements. It has been found that polymer complexes between PLP(Ⅱ) and PLGA (or PLAA) are formed via hydrogen bonding with a stoichiometric ratio of PLP(Ⅱ)/PLGA (or PLAA)=1:2 (in unit mole ratio) and that PLP(Ⅱ) forms polymer complex more favorably with PLGA than with PLAA. In addition, the minimum (for pH 5.0) and the maximum (for pH 3.2) in reduced viscosity of dilute PLP(Ⅱ)-PLGA mixed solutions are observed at 0.67 unit mole fraction of PLGA (i.e., [PLP(Ⅱ)]/[PLGA]=1/2). These findings could be explained in terms of molecular structure (or conformation) of the complementary polymers associated with the complex formation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.15-16
• /
• 2022

In order to examine the adhesion characteristics of road pavement according to environmental conditions, the freezing time of cement mortar and the adhesion performance between ice and pavement were evaluated depending on the presence or absence of polymer and water repellent. As a result of measuring the ice formation time, it was found that there was no delay when a polymer was added, but the complete freezing time was delayed when a water repellent was added. As a result of measuring the strength of ice adhesion, it was found that the bonding force between ice and the surface of the test body was greatly generated in the test body without water repellent. In the case of a test specimen to which a water repellent was added, it was found that the bonding strength between the test specimen surface and ice was reduced.