• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.18-21
• /
• 2003

The effect of interface bonding strength on the recovery force of SMA wire reinforced polymer matrix composites was investigated by pullout test. Firstly, the recovery forces and transformation temperatures of various prestrained SMA wires were measured and 5% prestrained SMA wires were prepared for the reinforcements of composites. EPDM incorporated with 20vol% silicon carbide particles(SiCp) of 6, 12, $60{mutextrm{m}}$ size were used as matrix. Pullout test results showed that the interface bonding strength increased when the SiCp size decreased due to the increase of elastic modulus of matrix. Cyclic test of composites was performed through control of DC current at the constant displacement mode. The abrupt decrease of recovery force during cycle test at high current was occurred by thermal degradation of matrix. This was in good agreement with temperature related in the thermal degradation of matrix. The hysteresis of recovery force with respect to the temperature was compared between wire and composite and the hysterisis of composites was smaller than the wire due to less thermal conduction.

• 한국고분자학회지:고분자과학과기술
• /
• 제26권4호
• /
• pp.313-322
• /
• 2015

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.65-71
• /
• 2013

PURPOSES : The objective of this study is to evaluate the effect of physical characteristics of emulsion asphalt and aggregate on performance of chip seal pavements. METHODS : In order to evaluate the performance of chip seal materials, the sweep tests and Vialit Plate Shock tests were conducted on the mixtures with five emulsion asphalt binders and three aggregate types. The sweep tests was intended to investigate the change of bonding properties between emulsion asphalt and aggregate with curing time. The Vialit Plate Shock test was used to evaluate the bonding properties of chip seal materials at low temperatures. RESULTS : Results from sweep tests showed that polymer modified emulsion asphalt can reduce the curing time by 1.5 hour comparing with typical emulsion asphalt. It is also found that the Flakiness Index of aggregates and absorption rate of binder are the major factors affecting the bonding properties of chip seal materials. The Vialit Plate Shock test results showed that the average aggregate loss of CRS-2 is ten times higher than CRS-2P No.2 indicating that the use of polymer additives in emulsion asphalt can improve the performance of chip seal materials in low temperature region. CONCLUSIONS : The use of polymer in emulsion asphalt can decrease the curing time of chip seal materials and increase the bonding properties between aggregates and asphalt binder. It is also concluded that the lower Flakiness Index and absorption rate of aggregates can improve the performance of chip seal pavement.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.347-347
• /
• 2006

Polymers containing poly(vinyl phosphonic) acid segments are promising candidates to be used as proton conducting membranes. Solid state NMR spectroscopy represents an ideal probe of proton motion on the molecular level, because it allows us to selectively detect the nuclei of interest. In this paper, we apply solid state NMR methods to poly(vinyl phosphonic) acid in order to demonstrate that the proton conduction of poly(vinyl phosphonic acid) results from P-OH proton through hydrogen bonding and that the condensation of phosphonic acid leads to decrease in proton conductivity. $^{1}H\;and\;^{31}P$ solid state NMR experiments are supported by quantum chemical computation of NMR parameters.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.144-151
• /
• 2005

Spin coater is regarded as a major module rotating at high speed to be used build up polymer resin thin film layer fur bonding process of GaAs wafer. This module is consisted of spin unit for spreading uniformly, align device, resin spreading nozzle and et. al. Specially, spin unit which is a component of module can cause to vibrate and finally affect to the uniformity of polymer resin film layer. For the stability prediction of rotation velocity and uniformity of polymer resin film layer, it is very important to understand the dynamic characteristics of assembled spin coater module and the dynamic response mode resulted from rotation behavior of spin chuck. In this paper, stress concentration mode and the deformed shape of spin chuck generated due to angular acceleration process are presented using analytical method for evaluation of structural safety according to the revolution speed variation of spin unit. And also, deformation form of GaAs wafer due to dynamic behavior of spin chuck is presented fur the comparison of former simulated results.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.509-515
• /
• 2021

In this study, a pressure vessel for a heat pipe was fabricated by bonding a metal thin film using a polymer compound sheet. In order to confirm the applicability of the experimentally manufactured copper material thin heat pipe of 0.6 mm or less, the pressure resistance and effective thermal conductivity for pressure generated according to the type of the working fluid of the heat pipe were evaluated to suggest the commercialization potential of the thin heat pipe. As a result of evaluating the pressure resistance and effective thermal conductivity performance of the thin heat pipe, the following conclusions were drawn. 1) Using a PEEK-based polymer compound sheet, it was possible to fabricate a pressure vessel for a thin heat pipe with a pressure resistance of up to 1.0 MPa by bonding a copper thin film, and the possibility of commercialization was confirmed at a temperature below 120 ℃. 2) In the case of the effective thermal conductivity performance evaluation test, the effective thermal conductivity of ethanol was higher than that of FC72 and Novec7000, and in the case of ethanol, the maximum effective thermal conductivity was 2,851 W/mK at 3.0 W of heating.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.223-226
• /
• 1998

Polyvinylalcohol (PVA) is a crystalline polymer, capable of hydrogen bonding, which makes the polymer useful for many industrial applications. production of high strength fibers, medical substitutes, adhesives, and so on[1], Specially, among fiber-forming polymers, PVA has the second highest crystal modulus and extreme strength after polyethylene because the polymer chain can take a planar zig-zag conformation. (omitted)

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.138-139
• /
• 2002

Polymer-bonded magnetostrictive composites have some distinct advantages over conventional type materials in being cost effective and suitable for high frequency applications due to high electrical resistivity. Composites of rare earth based alloys were reported to show good magnetostrictive characteristics both in static and dynamic conditions [1]. It was originally thought that the application of the polymer-bonding technique to transition metal alloys is straightforward. (omitted)

• 대한건축학회논문집:구조계
• /
• 제34권11호
• /
• pp.37-43
• /
• 2018

According to the evaluation of basic properties and mechanical characteristics of polymer cement mortars that contain re-dispersible type polymer, in the case of fresh mortars, flow and air content were increased due to the dispersion action of entrained air and surfactant with an increase of polymer addition ratio. In the case of mortars after hardening, flexural strength, bonding strength, absorption rate and carbonation resistance were improved due to the increased union and waterproof characteristics of internal structures as a result of the formation of polymer film.

• 폴리머
• /
• 제36권5호
• /
• pp.617-621
• /
• 2012

폴리아스팔트아미드[${\alpha}$,${\beta}$-poly(2-hydroxyethyl-DL-aspartamides), PHEAs]는 폴리아미노산의 일종으로서 잠재적인 의학 및 약학분야에 응용가능한 생분해성 생체적합성 재료로 널리 연구되어 왔다. 본 연구에서는 PHEA와 폴리(비닐 피롤리돈)(PNVP)의 블렌드 및 semi-IPN 젤에 관하여 다루었다. 블렌드 필름은 용액 캐스팅법으로 제조되었다. 제조된 블렌드는 전 조성에서 투명하였으며 DSC를 통해 조성에 따라 단조롭게 변화하는 단일한 유리전이 온도가 관찰됨으로써 두 개 고분자가 서로 상용성이 있음을 확인하였다. 고분자간의 가능한 수소결합 상호작용을 FTIR을 이용하여 설명하였다. 한편, 일정 조성의 PHEA/PNVP 블렌드 용액을 핵사메틸렌디이소시아네이트(HMDI)를 가교제로 사용하여 semi-IPN 타입의 하이브리드 젤을 제조하고, 제조된 젤의 팽윤 물성과 모폴로지를 조사하였다.