• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.171-171
• /
• 2006

In this presentation, we would like to report an inkjet printing method to produce 1 to 2 bit RFID tag working in the range of 6 to 28 MHz with or without transistors. The inkjet printing method especially for the formation of transistors, inductors, capacitors will be presented by the view of polymer chemistry. This presentation also includes the printing schemes for memory cell, ring oscillator, rectifier, antenna, and so forth for constructing RFID tag. I illustrate these strategies by describing recent my works on the formation of all SWNT-TFT and conducting polymer-silver nanocomposite inks that can be applied in the construction of electronic devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.173-176
• /
• 2005

Teijin사의 HT100-B60의 폴리카보네이트(polycarbonate) $100{\mu}m$, I-Component사의 PES(polyethersulfone) $200{\mu}m$, Ferrania사의 PAR(polyacrylate) $100{\mu}m$와 $200{\mu}m$를 사용하였다 열팽창계수의 차이로 인해 공정상 기판의 가열과 냉각시 열응력이 발생하여 기판의 크랙발생의 원인이 된다. 이를 최소화하기 위해 모든 공정이 시작하기 전에 pre-annealing을 통해 plastic 기판의 시간별 공정을 실시하였다. plastic film의 annealing time은 0h, 12h, 24, 40h, 50h, 60h, 70h, 80h으로 사간을 달리하여 오븐 안의 진공상태를 조성하여 실험하였다. Thermal evaporator로 Al을 약 170nm 증착하였으며 (주)동진 세미캠의 DTFR-1011s DR LCD용 감광액을 Spin Coating Spread(500rpm/6sec), Spin(3000rpm/20sec)으로 coating하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1625-1628
• /
• 2006

Two different negative-type photosensitive polyimides were synthesized and characterized for an application as an interdielectric layer in TFTLCD array. In the case of photocurable polyimides, the photosensitive moiety, 2-HHSP, was synthesized through 3 step reaction, and then was incorporated into side chains of polyimide precursor by post reaction. Optimum compositions of negative-type photocurable polyimde were also formulated. For photopolymerizable polyimides, two novel UV monomers containing imide linkages were prepared. An aqueous alkaline developable polymer matrix was synthesized by free radical copolymerization. A negative photoresist formulation was developed utilizing synthesized UV monomers containing imide linkage, photoinitiator, UV oligomer, and alkali developable polymer matrix. It was found that viaholes with good resolution, high transmittance and thermal resistance could be obtained by photolithographic process utilizing the negative-type photoresist formulations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.558-562
• /
• 2006

We have synthesized a new p-type polymer, poly(9,9'-n-dioctylfluorene-alt-phenoxazine) (PFPO), via the palladium catalyzed coupling reaction. The number average molecular weight ($M_n$) of PFPO was found to be 23,000. PFPO dissolves in common organic solvents such as chloroform and toluene. The UV-visible absorption maximum of the PFPO thin film is clearly blue-shifted with respect to that of F8T2, poly-(9,9'-n-dioctylfluorene-alt-bithiophene). The introduction of the phenoxazine moiety into the polymer system results in better field-effect transistor (FET) performance than that of F8T2. A solution processed PFPO TFT device with a top contact geometry was found to exhibit a hole mobility of $2.7{\times}10^{-4}cm^2/Vs$ and a low threshold voltage of -2 V with high on/off ratio(${\sim}10^4$).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1406-1408
• /
• 2006

Plastic substrate for flexible TFT LCD is developed. The gas barrier, optical properties and conductivity in the substrate is improved through depositing silicon oxide/nitride layer and ITO layer, coating polymer layer on plastic film by sputtering process and wet coating process. The whole production process of the plastic substrate is guaranteed the productivity by using roll to roll process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.297-300
• /
• 2005

The characteristics of polycrystalline silicon thin-film transistors (poly-Si TFTs) fabricated using sputter deposited amorphous silicon (a-Si) precursor films are investigated. The a-Si films were deposited on flexible polymer substrates using argon-helium mixture gases to minimize the argon incorporation into the film. The precursor films were then laser annealed by using a XeCl excimer laser and a four-mask-processed poly-Si TFT was fabricated with fully self-aligned top gate structure. The fabricated pMOS TFT showed field-effect mobility of $32.4cm^2/V{\cdot}s$ and on/off ratio of $10^6$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.308-309
• /
• 2008

We have proposed a high performance liquid crystal display using two thin film transistors (TFTs) for the large size TFT-LCD desirably 42inch WXGA panel for TVs. The device generates stronger electric fields to reorient liquid crystals than that in the conventional IPS device because the voltages with opposite polarity with respect to the common electrode are applied to each finger-type electrode. As a result, the operation voltage of 2Tr-IPS mode can be decreased and the transmittance can be increased compared to conventional IPS device. Consequently, the 2Tr-IPS has all the advantages over conventional IPS from large size point of view.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.39-40
• /
• 2008

We have examined post-annealing and passivation for the transparent bottom gate IGZO TFT having an inverse co-planar structure. The oxygen-vacuum two step annealing enhanced the field effect mobility up to 18 $cm^2$/Vsandthesub-threshold swing down to 0.2V/dec. However, the hysterysis and the bias stability problems could not be solved just by post-annealing. Thus, we have passivated the bottom gate IGZO TFTs with organic and inorganic materials. $Ga_2O_3$, $Al_2O_3$, $SiO_2$ and some polymer materials were effective materials for passivations. The hysterysis and the stability of the TFTs were remarkably improved by the passivations. We have manufactured the AMOLED panel with the transparent bottom gate IGZO TFT array successfully.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1473-1475
• /
• 2006

The electro-optic properties of an active-matrix polymer network liquid crystal display (AM-PNLCD) with crossed polarizer films to improve its contrast ratio were evaluated. By using crossed polarizer films, it shows good contrast ratio as well as wide viewing angle and adequate response time at normal TFT-twisted nematic (TN) LCD driving voltage (2.8V).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.315-317
• /
• 2009

We report the preparation of novel nanofiber organic semiconductors that can be utilized as the active channel materials in the field effect transistors (FETs). The nanofibers produced by the electrospinning reveals the excellent performances (mobility ~ 0.16 $cm^2$/V) due to thier highly ordered molecular packing in the polymer matrix.