• 공업화학
• /
• 제31권6호
• /
• pp.668-673
• /
• 2020

본 논문에서는 수산화코발트[Co(OH)2] 층간 소재를 초음파(sonication) 액상 박리 공정을 사용하여 얇은 2차원 나노시트(nanosheet)로 박리하였다. 상기의 Co(OH)2 촉매는 27.5 ㎡ g-1의 넓은 비표면적을 갖는 한 장의 육각 나노시트로 박리 되었다. 또한, 특성 분석 및 PET 해중합(depolymerization) 반응의 촉매로서 사용되어 고활성을 증명하였다. 해당 촉매를 사용한 PET 해중합 반응은 200 ℃에서 30 min 이내에 100%의 높은 PET전환율과 100%의 높은 BHET 수율을 보여주었다. 박리된 Co(OH)2의 재사용성을 확인하기 위해 반응 후 필터를 사용해 촉매를 회수하여 PET 해중합 반응을 진행하였다. 총 4번의 재사용 동안 100%의 PET 전환율과 100%의 BHET 수율을 보여주어 촉매의 우수한 안정성을 증명하였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.337-338
• /
• 2003

PTT(poly trimethylene terephthalate)섬유는 PET(polyethylene terephthalate)섬유에 비하여 탄성 (elasticity)가 우수하고 염색성이 PET와 유사한 점에서 차세대섬유로 분류되고 있다. 분자의 구조가 trans-trans의 fully extended chain(rod shape)형태인 PET에 비하여 trans-gauche-gauche-trans의 스프링과 같은 extended zigzag(helix shape)이어서 탄성회복성이 우수하다. 또한 PTT의 탄성계수값은 PET에 비하여 $\frac{1}{2}$정도이다. 의복을 착용중 신장과 수축을 반복하는 과정에서 섬유는 탄성을 점차 상실하게 되는데, 이 응력완화의 변화특성에 따라서 착용감이 영향을 끼친다. (중략)

• 동아시아식생활학회지
• /
• 제23권4호
• /
• pp.461-469
• /
• 2013

This research is performed to investigate the changes in the physicochemical properties and microbial growths of seasoned anchovies with various packaging materials (PET/CPP : polyethylene terephthalate/cast polypropylene, PET/EVOH : polyethylene terephthalate/ethylene-vinyl alcohol, PET/AL/LDPE: polyethylene terephthalate/aluminum/low density polyethylene), which are stored at various temperatures (25, 35, $45^{\circ}C$) for 60 days. Generally, it is being observed that changes in physicochemical properties (i.e., moisture content, color, brown intensity, TBA value, TMA, VBN etc) of seasoned anchovies are significant when stored at higher temperatures. Particularly, the packaging materials are found to influence substantially on the physicochemical properties of seasoned anchovies. With packaging materials of high oxygen transmission rates and moisture vapor transmission rates (i.e., PET/CPP), the changes in physicochemical properties of seasoned anchovies are significant, while being low with low oxygen transmission rates and low moisture vapor transmission rates (i.e., PET/EVOH). In addition, results of microbial growths in seasoned anchovies show that significant increases in total aerobic bacteria counts (about 100-fold after 60 day of storage) are observed in samples with packaging materials of high oxygen transmission rates and moisture vapor transmission rates (i.e, PET/CPP), while with only small increases for samples of low oxygen transmission rates and low moisture vapor transmission rates (i.e., PET/EVOH). Based on the changes in the physicochemical properties and results of microbial growths, it is being concluded that PET/EVOH film is suitable for the packaging of seasoned anchovies.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.541-546
• /
• 2011

In this study, conjugate fibers were prepared from 1,4-cyclohexanedimethanol-modified polyethylene terephthalate (PET) resin using side by side conjugate spinning, sea-island type conjugate spinning, and split type conjugate spinning methods, and the properties of the conjugate fibers were investigated via several techniques. When viscosity increased, the tenacity of side by side conjugate fibers was increased, whereas elongation decreased. The sea-island conjugate fibers showed lower weight loss and surface color difference (K/S) values relative to that of regular PET fibers at the same conditions. The SEM results indicate that orange type spilt readily produced at a temperature range of 120 - 140$^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.437-442
• /
• 2016

재활용 PET (Poly ethylene terephthalate)로부터 PBT (Poly butylene terephthalate)를 생산할 수 있는 새로운 방법을 모색하였다. 이 방법은 PET와 BD (1,4-butanediol)의 에스테르 교환반응을 통하여 BHBT (Bishydroxybutylterephthalate) 올리고머를 생성하는 글리콜리시스 반응과 BHBT의 축합 중합 반응을 통하여 PBT 올리고머를 생성하는 축중합 반응으로 이루어져 있다. 이를 통해 단기 수명 주기 제품인 버려지는 PET 페자원을 장기 수명 주기 제품인 PBT로 변환시켜 더 가치 있고 바람직한 재활용을 하고자 하였다. 본 연구에서는 글리콜리시스와 축중합 촉매로 zinc acetate를 사용하였고, 글리콜리시스 반응에 대하여 회분식 반응기와 반 회분식 반응기를 적용하여 성능을 비교하였다. 이를 위하여 생성되는 에틸렌글리콜(EG)의 양을 정량하여 해중합도를 추정할 수 있는 EG 수율과 부산물인 THF 생성량을 성능 척도로 하였다. 반응 도중에 EG를 제거하는 반회분식 반응기의 성능이 회분식 반응기에 비하여 보다 우수한 것으로 나타났다. 또한 반회분식 반응기의 경우 최적의 반응조건은 BD/PET 비율 4, 반응온도 $220^{\circ}C$ 이었으며, 최고 EG 수율은 91% 이었다. 또한 축 중합 반응이 진행됨에 따라 PBT 올리고머의 분자량이 증가하는 것을 보였다.

• Carbon letters
• /
• 제14권4호
• /
• pp.243-246
• /
• 2013

In this work, electroless Ni-plating on polyethylene terephthalate (PET) ultra-fine fibers surfaces was carried out to improve the electric conductivity of the fiber. The surface properties of PET ultra-fine fibers were characterized using scanning electron microscopy, X-ray diffraction, and contact angle analyses. The electric conductivity of the fibers was measured using a 4-point testing method. The experimental results revealed the presence of island-like nickel clusters on the PET ultra-fine fibers surfaces in the initial plating state, and the electric conductivity of the Ni-plated fibers was enhanced with increasing plating time and thickness of the Ni-layers on the PET ultra-fine fibers.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.53-66
• /
• 2015

Plastic wastes, particularly polyethylene terephthalate (PET) generated from used bottled water constitute a worldwide environmental issue. Reusing the PET waste for geotechnical applications not only reduces environmental burdens of handling the waste, but also improves inherent engineering properties of soil. This paper investigated factors affecting shear strength improvement of PET-mixed residual soil. Four variables were considered: (i) plastic content; (ii) plastic slenderness ratio; (iii) plastic size; and (iv) soil particle size. A series of unconfined compression tests were performed to determine the optimum configurations for promoting the shear strength improvement. The results showed that the optimum slenderness ratio and PET content for shear strength improvement were 1:3 and 1.5%, respectively. Large PET pieces (i.e., $1.0cm^2$) were favorable for fine-grained residual soil, while small PET pieces (i.e., $0.5cm^2$) were favorable for coarse-grained residual soil. Higher shear strength improvement was obtained for PET-mixed coarse-grained residual soil (148%) than fine-grained residual soils (117%). The orientation of plastic pieces in soil and frictional resistance developed between soil particles and PET surface are two important factors affecting the shear strength performance of PET-mixed soil.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.95-101
• /
• 2010

For the development of higher-sizing performance of paper, a sizing agent using recycled PET was synthesised. Polyester resin was extracted from wasted PET by subcritical hydrolysis and finally modified to synthetic sizing agent by mixing water-disperse PET with triphenyl phosphite(TPP). The modified PET was considered as an internal sizing agent in different wet-end papermaking conditions. The optimum condition in sizing efficiency was obtained in initial pH of 6.5 in case of rosin+alum system, and 7.5 in case of rosin+alum+PET system, respectively, and in addition amount of PET 3%. The sizing efficiency was also closely related according to the fiber properties of wet-end slurry, such as virgin fibres from UKP and recycled fibres from KOCC. The application of modified PET was good in strength improvement of paper, specially in tensile strength.

• 한국환경보건학회지
• /
• 제42권3호
• /
• pp.160-168
• /
• 2016

Objectives: Materials coming into contact with food may result in the migration of chemical substances into the food. To protect consumers from exposure, Regulation (EU) No. 10/2011 specifies the use of standard migration tests. Polyethylene terephthalate (PET), widely used for food packaging materials, has drawn the attention of researchers because unwanted migration of PET into food might occur when consumers reuse packaging material. The aim of this study was to predict and develop a migration model for two components, acetaldehyde and butyraldehyde in PET, into food simulants under conditions of changing pH and solvents, such as those observed in fermented foods like kimchi or sauerkraut. Methods: Using a migration model based on Fick's second law of diffusion in one dimension, the migration of acetaldehyde and butyraldehyde from PET into a simulant of fermented food at $20^{\circ}C$ over 10 days was evaluated. The simulant for fermented food was modelled as 10% ethanol for three days, followed by 3% acetic acid for seven days. Results: The migration of acetaldehyde into the 10% ethanol was 0.36 times that of a simulated fermented food system, while that of butyraldehyde was 1.34 times greater. These results may have been influenced by the chemical interactions among the migrants, polymers and simulants, as well as by the solubilities of the migrants in polymers and simulants. Conclusion: Because food simulants have a limited capacity to mimic real food systems under the current migration model, an appropriate simulant and migration test should be considered in the case of increasing acidity. Furthermore, since the accuracy of the worst-case estimation of migration predicted by the current model is severely limited under changing food conditions, food simulants and their interactions should be further investigated with respect to conservative migration modelling.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2002년도 춘계 학술논문발표회 논문집
• /
• pp.439-444
• /
• 2002

PET(Polyethylene terephthalate)수지는 engineering plastic으로서 film, 각종 용기 등의 소재로 널리 사용되고 있다 특히 PET의 투명성, 위생성, 내약품성, 우수한 기체 차단성, 내열성 등 우수한 물성을 이용한 음료용 PET bottle은 식음료 산업의 발전에 따라 그 사용량이 크게 증가하여 발생되는 폐기물 발생량 또한 사회문제로 대두되고 있으나 가공성의 문제로 재생원료로서의 이용이 미비한 실정이다.(중략)