• Journal of Korean Society of Forest Science
• /
• v.71 no.1
• /
• pp.66-73
• /
• 1985

Factors affecting isolation and fusion of protoplasts of three Quercus species were investigated and procedures for isolation, purification and fusion of protoplasts of the three species were also established. Unhardened leaves and rapidly growing callus cultures were good source of viable protoplasts. The optimum composition of enzyme mixture for rapid isolation of protoplasts from leaf mesophyll tissues and calli was Cellulase Onozuka R-10 (20g/l, Macerozyme R-10(10g/l), Pectinase(250 units/l, $CaCl_2$, $2H_2O$(14mM), $MgSO_4{\cdot}7H_2O$(1.8mM), $KNO_3$(1.0mM), $H_3BO_3$(1.0mM), $KH_2PO_4$(0.2mM), KI($1.0{\mu}M$), 1,4-dithiothreitol (0.1mM) and mannitol (0.6M). Optimum density of protoplasts for maximum fusion was $2{\times}10^5/ml$ which was the highest protoplast density given in this study. Optimum concentration and duration of PEG 1450 treatment for inducing fusion appeared to be 29%(W/V) final PEG 1450 concentration and 5-10 minutes, respectively.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.3
• /
• pp.151-160
• /
• 2001

The purpose of this study is to investigate the interaction of progesterone with various cyclodextrins (CDs) in the aqueous solution and in solid state, and finally to formulate a parenteral aqueous formulation. CDs used were ${\alpha}-$, ${\beta}-$, and ${\gamma}-CD$, $2-hydroxypropyl-{\beta}-CD$ (HPCD), sulfobutyl $ether-{\beta}-CD$ (SBCD), $dimethyl-{\beta}-CD$ (DMCD) and $trimethyl-{\beta}-CD$ (TMCD). The solubility studies of progesterone were performed in the presence of various CDs as a function of concentration or temperature. The solubility of progesterone increased in the rank order of ${\alpha}-CD$ < ${\beta}-CD$ < ${\gamma}-CD$ < TMCD$ < HPCD < DMCD < SBCD. Addition of SBCD (200 mg/ml) in water increased the aqueous solubility $(9.36\;{\mu}g/ml)$ about 3,200 times, and lowering the temperature facilitated the solubilization of progesterone. However, the addition of HPCD and SBCD in 20:80 (v/v) polyethylene glycol 300-water and propylene glycol-water cosolvents markedly decreased the solubility of progesterone, compared with solubilizing effects in water. Physical mixtures and solid dispersions of progesterone with HPCD or SBCD were prepared, and evaluated by differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), near IR spectroscopy and dissolution studies. By DSC and IR studies, it was found that progesterone was dispersed in HPCD in monotectic state and dissolved rapidly from both solid dispersions. Based on solubility studies, new aqueous progesterone fonnulations (5 mg/ml) containing SBCD (200 mg/ml) could be prepared and did not form precipitates even after 2 months at $4^{\circ}C$. The solution was transparent when mixed with normal saline and 5% dextrose injection at 1: 1, 1:10 and 1:20 (v/v) even after 7 days. Permeation rates of progesterone through a cellulose membrane from 20% PEG 300 solution $(50\;{\mu}g/ml)$ containing HPCD or SBCD were compared with oily formulation. Permeation of progesterone from oily formulation did not occur up to 8 hr, but aqueous formulations showed fast permeation rates from early stage of permeation study. The addition of HPCD or SBCD retarded the permeation rates of progesterone with the increase of CD concentrations, suggesting the possibility of a controlled absorption from the site administered intramuscularly. These results demonstrate that it is feasible to develop a new progesterone parenteral aqueous injection (5 mg/ml) using SBCD.

• Korean Journal of Microbiology
• /
• v.47 no.2
• /
• pp.117-123
• /
• 2011

The purpose of this study was to evaluate and compare different elution and concentration methods for optimization of human rotavirus (HRV) detection method using real-time RT-PCR and cell culture techniques. The leafy vegetable samples (lettuce, Chinese cabbage) were artificially inoculated with HRV. Viruses were extracted from the vegetables by two different elution buffers, buffer A (100 mM Tris-HCl, 50 mM glycine, 3% beef extract, pH 9.5) and buffer B (250 mM Threonine, 300 mM NaCl, pH 9.5), and the extracted viruses were concentrated by filtration and PEG precipitation sequentially. To determine infectivity of the viruses, the viruses recovered from the samples were infected to the MA-104 cells, and integrated cell culture real-time RT-PCR was performed at 1, 48, 72, 96, 120, 144, 168 h post-infection (p.i.). The elution buffer A was more efficient in extracting the virus from the produce samples tested than the buffer B, 29.54% and 18.32% of recoveries, respectively. The sensitivity of real-time RT-PCR method was markedly improved when the virus was concentrated by the filtration method. When the viruses were eluted and concentrated by buffer A and filtration, respectively, the average recovery rate was approximately 51.89%. When the viruses recovered from samples were infected to MA-104 cell, infectious HRV was detected within 48 h p.i. by ICC/real-time RT-PCR, whereas cytopathic effects were not observed until 72 h p.i. The optimized detection method evaluated in this study could be useful for rapid and reliable detection of HRV in fresh produce products and applied for detection of other food-borne viruses.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.390-393
• /
• 1997

${\kappa}-Carrageenan-based$ film prepared by mixing 2% ${\kappa}-carrageenan$, 0.1% KCl, 0.75% polyethylene glycol, and 0.75% glycerol was examined to be used as a potential packaging material for mackerel mince for preventing moisture loss and lipid oxidation. Mackerel mince patties were vacuum-packaged with the film and stored at $20^{\circ}C,\;10^{\circ}C,\;0^{\circ}C,\;and\;-15^{\circ}C$; nonpackaged patties were also stored at $0^{\circ}C$. Weight reduction, peroxide value (PV), and thiobarbituric acid (TBA) value were measured during storage. The packaged or nonpackaged samples stored at $20^{\circ}C,\;10^{\circ}C,\;and\;0^{\circ}C$ showed a 60% weight reduction between 2 and 15 days of storage, while the weight reduction of the samples stored at $-15^{\circ}C$ was about 3% after 25 days. The nonpackaged samples stored at $0^{\circ}C$ showed a steady increase in lipid oxidation with the PV reaching 23 mequivalent peroxide (PO)/㎏ on day 20 and with the TBA value at 0.4 mole malonaldehyde (MA)/g on day 5. The PV and TBA values of the samples vacuum-packaged with the carrageenan-based film were below 2 mequivalent PO/㎏ and below 0.1 mole MA/g, respectively, regardless of storage temperature throughout the storage of 28 days.

• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.243-250
• /
• 1986

Protoplast formation and regeneration from wild-type and auxotrophic mutants of Candida pseudotropicalis CBS 607 as well as fusion between complementary mutants were carried out. Frequencies of protoplast formation from wild-type and histidine or adenine requiring mutants ranged from 96 to 100% whereas those from methionine or tryptophan auxotrophs were 52 and 72%, respectively. When bovine serum albumin(4mg/ml, BSA) was added to protoplasting buffer for cells of methionine or tryptophan auxotrophs grown in a medium supplemented with myoinositol(0.5mg/ml), 96-99 % of cells were converted to protoplasts. Protoplasts were regenerated at the frequencies ranging from 18 to 20%. However, the addition of BSA to protoplasting buffer and the supplement of myoinositol to a medium of cell growth doubled the regeneration rate except adenine auxotroph in which such an improvement was not observed. It was found that optimal concentrations of polyethylene glycol and $CaCl_2$ are 20% and 100mM while optimal pH and exposure time are 6.0 and 30min. The fusion frequencies between complementary mutants ranged from $1.5{\times}10^{-3}\;to\;8.8{\times}10^{-3}$ and were enhanced by the improvement in the rate of protoplast regeneration. When histidine auxotroph was fused with tryptophan mutant, several fusion products were obtained which were found to be in the state of aneuploid or diploid, judging from DNA content and the presence of a large nucleus in the products.

• Journal of Mushroom
• /
• v.5 no.1
• /
• pp.39-42
• /
• 2007

This study was carried out to characterize virus-like particles (VLPs) in Pleurotus ostreatus. The white and the dark gray mutants frequently observed in mushroom farms of Pleurotus ostreatus (Wonhyeong-neutari). A 5.8kb segments of dsRNA was detected only in the white mutants but not in the dark gray mutants. The VLPs were purified from the fruit bodies by Polyethylene Glycol (PEG) and ultracentrifugation. Electron microscopy analysis showed that VLPs were isometric about 14, 20~45nm in diameter. Further study is needed to reveal the morphological and yield variations of mushroom strains including VLPs observed in the mushroom farms. Also it is needed to maintain fundamental research for taxonomy, diagnosis, and physiology of VLPs in the mushroom strains.

• Microbiology and Biotechnology Letters
• /
• v.14 no.2
• /
• pp.125-131
• /
• 1986

In order to obtain the optimum conditions for intact yeast cell transformation in the various yeast host-vector systems, 3 yeast plasmid vectors, YRp7, YEpl3 and YIp5 were introduced into 5 yeast hosts, Saccaromyces cervisiae Dl3-1A, DKD-5D, DBY-746, MC-16 and S2022D with various transformation conditions, and plasmid stabilities in all the transformants were also observed. The highest transformation frequencies in all the host-vector system were obtained in the 16 hour Cultured cell (5.4 $\times$ 10$^6$ - 2.4 $\times$ 10$^8$cells/$m{\ell}$) treated with 0.1-0.2 M lithium chloride in 0.1 M tris-HCl (pH 7.6), 35% polyethylene glycol 4000, and heat-shocked at 42$^{\circ}C$ for 5 minutes after 60 minutes of induction. The intact cell transformation got more transformation frequency in DKD-5D (YRp7) and DBY-746 (YEpl3) than protoplast transformation, but reverse tendency was observed in DKD-5D (YEp13) and Dl3-lA (YRp7). The transformants, D13-1A (YRp7) and DKD-5D (YRp7) were very unstable in selective medium, with 80 to 85% of the transformants losing the plasmid after 70 generations, but the transformants, DKD-5D (YEpl3) and DBY-746 (YEpl3) were quite stable, with 35% of the transformants losing the plasmid.

• Journal of Yeungnam Medical Science
• /
• v.13 no.1
• /
• pp.46-58
• /
• 1996

Inositol 1,4,5-triphosphate($InsP_3$) is a second messenger for mobilizing intracellular $Ca^{2+}$. It can be dephosphorylated by soluble and particulate forms on $InsP_3$ 5-phosphatase, or phosphorylated to produce inositol 1,3,4,5-tetrakisphosphate($InsP_3$) by $InsP_3$ 3-kinase. These enzymes represent possible targets for the regulation of the $InsP_3/InsP_4$ signal. $InsP_3$ 3-kinase which catalyses th ATP-dependent phosphorylation of $InsP_3$ was purified from bovine brain tissue. All operation were carried out at $4^{\circ}C$. Fresh tissure was homogenized and centrifuged. The supernatant was pooled. Proteins were precipitated from 10% polyethylene glycol, and suspended solution was applied to DEAE cellulose column for chromatography. As the result of above procedure, two isozymes of $InsP_3$ 3-kinase, I and II were obtained. Each isozyme was applied to Matriz green gel, Calmodulin-Affigel 15 column and subsequent phenyl-TSK HPLC column. Specific activites(SA) and fold of puriety were observed at each purification step of chromatography. At DEAE cellulose chromatography, SA were I, 0.6 and II, 4.8 nM/min/mg, and folds were I, 17.2 and II, 16.6. At Matrix green gel chromatography, SA were I, 18 and II, 11 nM/min/mg, folds were I, 62.1 and II, 38.0. At calmodulin-Affigel 15 column chromatography, SA were I, 19 and II, 13 nM/min/mg, folds were I, 65.5 and II, 44.8. Finally $InsP_3$ kinase I and II were purified 3,103-fold and 2,310-fold, and SA were I, 900 and II, 670 nM/min/mg, respectively. SDS-polyacrylamide gel electrophoresis elucidated 3 distinct fractions of Mr of 145,000, 85,000 and 69,500 from isozyme I, and 2 distinct fractions of Mr of 79,000 and 57,000 from isozyme II.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2017

Chemotherapy, radiation therapy, and surgery are major methods to treat cancer. However, current cancer treatments report severe side effects and high recurrences. Recent studies about engineering nanoparticles as a drug carrier suggest possibilities in terms of specific targeting and spatiotemporal release of drugs. While many nanoparticles demonstrate lower toxicity and better targeting results than free drugs, they still need to improve their performance dramatically in terms of targeting accuracy, immune responses, and non-specific accumulation at organs. One possible way to overcome the challenges is to make precisely controlled nanoparticles with respect to size, shape, surface properties, and mechanical stiffness. Here, we demonstrate $500{\times}200nm$ discoidal polymeric nanoconstructs (DPNs) as a drug delivery carrier. DPNs were prepared by using a top-down fabrication method that we previously reported to control shape as well as size. Moreover, DPNs have multiple payloads, poly lactic-co-glycolic acid (PLGA), polyethylene glycol (PEG), lipid-Rhodamine B dye (RhB) and Salinomycin. In this study, we demonstrated a potential of DPNs as a drug carrier to treat cancer.