• Textile Coloration and Finishing
• /
• v.11 no.5
• /
• pp.1-6
• /
• 1999

This study was carried out to investigate the effect of a scouring machine including an ultrasonic system on desizing and scouring polyester fabrics. The ultrasonic frequency of the improved machine showed up at 28.882 kHz. Frequency amplitude increased with the current and the bath temperature, and then showed a constant level. Scouring effect of the ultrasonic machine was better than that of the conventional scouring machine using the mechanical stirring. The ultrasonic machine showed the optimum scouring effect at $50^\circ{C}$ of bath temperature and 10 min. of operation time, as compared to the conventional machine that required operating conditions of high temperature at $90^\circ{C}$, stirring speed at 40 rpm, and stirring time for 15 min..

• Fashion & Textile Research Journal
• /
• v.1 no.2
• /
• pp.182-187
• /
• 1999

The study was conducted on the change of value of physical properties, mechanical properties, appearance of seams as repeated washing and drying with 1, 3, 5, 7, 10, 15, 20 times. Commercial cotton 100%, cotton/polyester 80/20% and polyester 100% dress shirts were used to investigate drying characteristics and physical properties and compare of each materials after repeated drying. The mechanical properties like tensile, shear, surface, compression, thickness and weight were measured by the KES-FB system.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.16-27
• /
• 2006

The purpose of this study was to examine the effects of chemical finishes on performance characteristics of microfiber blend fabrics. A 60% polyester microfiber /40% cotton blend woven fabric was finished by ten chemicals: three silicone softeners, one fluorochemical, and their mixtures. Performance characteristics examined were fabric hand attributes. Fabric hand was evaluated by instrumental measures using Kawabata KES-F system instruments. Silicone-only finishes did not change the bending properties significantly from those of the control fabric. The fluorochemical-only finish made the fabric stiffer and crisper. When the two chemicals were mixed they tended to offset this adversary effect. Most of the chemical finishes made the surface finer and smoother. Fluorochemical-only finish improved fabric strength. Likewise, dimethylpolysiloxane silicone improved fabric strength. Amino-functional hydrophilic and diamino-functional silicone softeners, on the other hand, reduced fabric strength. However, when mixed with the fluorochemical, the adversary effect was diminished.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.163-164
• /
• 2010

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.171-176
• /
• 2009

Purpose : To investigate the effect of coating material in RF coil, which is one of main parts in MRI machine, on the Q-factor and SNR(signal-to-noise ratio) in MR images. Materials and Methods : RF coils with inner diameter of 1.7 mm were made by using copper wires coated with polyester, polyurethane, polyimide, polyamideimide, and polyester-imide, and by using copper wires in which coating materials had been removed. Q-factors of the RF coils were measured by network analyzer, and SNR values in the spin-echo MR images obtained by 600 MHz (14.1 T, Bruker DMX600) micro-imaging system for the coated and uncoated cases. Results : The measured SNRs were almost same for the RF coils with coat-removed copper wires, however SNRs and Q-factors were different for the coated cases depending on the coating material. They were maximized in the polyurethane-coated case in which the SNR was > 30% greater than polyester-coated case. Conclusion : We made solenoid-type RF coils which were easily used for MR micro-imaging in Bruker MRI probe. There was a significant coating-material dependence in the measured Q values and SNRs for the home-made RF coils. The study demonstrated that the choice of coating material of RF coil may be a critical factor in the MRI sensitivity based on SNR value.

• Textile Coloration and Finishing
• /
• v.28 no.2
• /
• pp.109-117
• /
• 2016

Synthetic fabrics, such as nylon and polyester, were dyed with persimmon juice by using a padding mangle repeatedly. The mechanical properties of these synthetic fabrics were analyzed using the Kawabata evaluation system. The following findings were obtained from this investigation. As the number of repetitions of padding dyeing increased, the tensile energy per unit area and the tensile resilience of synthetic fabric remained almost unchanged, whereas the linearity of the load-extension curve of the synthetic fabrics increased. As the number of padding repetitions increased, the synthetic fabrics dyed with persimmon juice exhibited increases in thickness and weight. As the number of repetitions of padding treatment with persimmon juice increased, the values of stiffness, anti-drape stiffness, fullness, and softness also increased, whereas the flexibility with soft feeling, crispness, and scrooping sensation significantly decreased. The amount of coated persimmon juice on the surface of the fabrics increased after three repetitions of padding treatment with persimmon juice. Nylon and polyester fabrics were dyed evenly with persimmon juice treated using a padding mangle.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.344-349
• /
• 2005

Polyurethanes(PUs) were synthesized by reaction of isophorone diisocyanate, acetylbutyl citrate, and 3 types of polycaprolactone diol. Their structures were confirmed by FT-IR and NMR spectrometer. And, their thermal and mechanical properties were measured by TGA ud UTM. The effective network chain lengths ($\bar{M}_c$), measured by compressive modulus apparatus, were about $8000\~24000$ g/mol. As crosslinking density and amount of hard segment increased, tensile strength increased and elongation decreased. As the crosslinking density of PUs increased, thermal property inproved. When the ratio of NCO/OH is 1.1, maximum crosslinking density was achieved.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.4
• /
• pp.207-221
• /
• 2010

This study aim to suggest how alter the korean traditional image design for umbrellas by sublimation transfer digital textile printing. Umbrellas are highly depend on design and made from polyester fiber which is proper item to utilize sublimation transfer digital textile printing. Sublimation transfer digital textile printing system can use computer system to create the delicate high dense images and one full layout through the hole umbrella. It can create distinctive style of design compare with former screen printing umbrella design. As a result of this study, Korean traditional images were adopted and recreated for umbrellas as the modern practical item. 7 of umbrella designs were developed and sample umbrellas could be produced in short period comparing with screen printing process. Through this study, as green printing process, sublimation transfer digital textile printing will be more applied to manufacture high quality textile products along with design development, thus it is expected as an alternative plan to leads growth of umbrella industries.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.137-142
• /
• 2005

The effects of temperature and initial crack length on impact fracture behavior of side plate material of 35 ton class FRP ship, which are composed by glass fiber and unsaturated polyester resin, were investigated. Impact fracture toughness of GF/PE composites displayed maximum value when the temperature of specimen is room temperature and $50^{\circ}C$, and with decrease in temperature of specimen, impact fracture toughness decreased. Impact fracture energy of GF/EP composites decreased with increase in initial crack length of specimen, and this value decreased rapidly when the temperature of specimen is lowest, $-25^{\circ}C$,. It is believed that sensitivity of notch on impact fracture energy were increased with decrease in temperature of specimen. As the GF/EP composites exposed in low temperature, impact fracture toughness of composites decreased gradually owing to the decrease of interface bonding strength caused by difference of thermal expansion coefficient between the glass fiber/polyester resin. Further, decrease of interface bonding strength of composites with decrease in specimen temperature was ascertained by SEM photograph of impact fracture surface.

• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.39-44
• /
• 2014

To confirm the performance and benefit of the developed online E-commerce Real Industrial Color(RIC) device, cotton and polyester were dyed with selected 39 colors. The captured images of dyed cotton and polyester by using RIC device were compared with original samples and confirmed ${\Delta}E$ using a spectrophotometer and RIC device. Overall, visual comparison of the captured images was similar to the real dyed samples. In high concentration of dyeings, the color consistency between real samples and captured images was better than in lower color concentration of dyeings. Similarly, the result was almost the same when the developed RIC device was used since ${\Delta}E$ values of RIC device were smaller compared with spectrophotometer. In this regards, the RIC device developed up to date can be assumed that it is more influenced by the color rather than fabric materials.